BeachJoshua Posted May 10, 2010 Report Posted May 10, 2010 I'm reffering to the roof brace in my extended cab S-10... that gooy black stuff they put between it and the roof it doesn't work anymore... So I need help here. | S-10 | 4.5^3 ft | 33Hz | SAE-1000D @ 1 Ohm | 2 SA-12s | SPL: 143.7 Sealed | 153.4 Port Wars
BeachJoshua Posted May 10, 2010 Author Report Posted May 10, 2010 I'm about to head out to lowes, and if someone thinks deadener will hold this I'm trying it will peel and seal, or if I should get anything that will do it that will go in like a caulk gun or something? | S-10 | 4.5^3 ft | 33Hz | SAE-1000D @ 1 Ohm | 2 SA-12s | SPL: 143.7 Sealed | 153.4 Port Wars
BeachJoshua Posted May 10, 2010 Author Report Posted May 10, 2010 jb weld Will hold that together? like as an estimate if I took two peice of painted metal put JB weld between em, how much weight would it take to seperate em? | S-10 | 4.5^3 ft | 33Hz | SAE-1000D @ 1 Ohm | 2 SA-12s | SPL: 143.7 Sealed | 153.4 Port Wars
Skullz Posted May 10, 2010 Report Posted May 10, 2010 http://autobodystore.net/Merchant2/merchant.mvc?Screen=PROD&Product_Code=fus116b&Category_Code=MB http://autobodystore.net/Merchant2/merchant.mvc?Screen=PROD&Product_Code=FUS1&Category_Code=MB 01 Ford focus ZX3 Pioneer AVH-X491BHS PPI PC 4800.2 Morel Maximo 6.5" x2
BeachJoshua Posted May 10, 2010 Author Report Posted May 10, 2010 http://autobodystore.net/Merchant2/merchant.mvc?Screen=PROD&Product_Code=fus116b&Category_Code=MB http://autobodystore.net/Merchant2/merchant.mvc?Screen=PROD&Product_Code=FUS1&Category_Code=MB Face Palm to self... ESPENSIVE! | S-10 | 4.5^3 ft | 33Hz | SAE-1000D @ 1 Ohm | 2 SA-12s | SPL: 143.7 Sealed | 153.4 Port Wars
Skullz Posted May 10, 2010 Report Posted May 10, 2010 Did you honestly think you were going to get off cheap? 01 Ford focus ZX3 Pioneer AVH-X491BHS PPI PC 4800.2 Morel Maximo 6.5" x2
chewie Posted May 10, 2010 Report Posted May 10, 2010 sand the surface clean then jb weld it.. flip your truck over and put some weight on the brace so it will set correctly 91 dodge colt gt.. 4 custom t600 15s audioque 3500d.1 tuned to 25 hz... stay tuned. blazer stroker 15 brutus bxi2006d terrible voltage drop 145.4@38HZ... SEALED LEGAL Aim: chewieft09 www.t3audio.com carpe diez nuts !! my house is louder than your car...
BeachJoshua Posted May 10, 2010 Author Report Posted May 10, 2010 sand the surface clean then jb weld it.. flip your truck over and put some weight on the brace so it will set correctly The peice of wood that's holding it up so it doesn't flap around and do a roof trick as I call it should work fine. | S-10 | 4.5^3 ft | 33Hz | SAE-1000D @ 1 Ohm | 2 SA-12s | SPL: 143.7 Sealed | 153.4 Port Wars
Recommended Posts
Archived
This topic is now archived and is closed to further replies.