Bus Bars Or Wire

[l DaChOsEnOnE l]

When wiring multiple batteries and multiple runs what do you guys prefer using bus bars or just using wire? Post pics of you battery wire up if possible.

[hdorre]

It would be easier to use buss bars in some instances, depending on how many components need to be powered

[zayres29]

i would use bus bars because its cheaper from what i understand wire (in some cases) is better because you are SUPPOSED to have a fuse in between each batter to protect them but if your batteries are all secure and all that good stuff you should be good just make sure you have fuses in between your battery bank and your other battery/batteries

[CaptainzPlanetz]

I say bus bars for more than two batteries/the same batteries example 2 Kinetik 2000's.......Or wires work fine for 2 batteries or less/mismatched size batteries example a kinetik 1400 and 2000.

[hdorre]

i would use bus bars because its cheaper from what i understand wire (in some cases) is better because you are SUPPOSED to have a fuse in between each batter to protect them but if your batteries are all secure and all that good stuff you should be good just make sure you have fuses in between your battery bank and your other battery/batteries

You could still fuse your buss bars if the bars aren't directly on the batteries. You would use wires to connect the batteries to the buss bar though, so I guess that's the most expensive way

[skittlesRgood]

You could still fuse your buss bars if the bars aren't directly on the batteries. You would use wires to connect the batteries to the buss bar though, so I guess that's the most expensive way

the right way usually is.

[hdorre]

the right way usually is.

Yep, that's the unfortunate truth

[Team_DC-Derrick]

[BigHOUSTON]

I was wanting to know the same thing!

[UniqueSounds]

I was wanting to know the same thing!

X2