Twiztidsetup Posted June 1, 2010 Report Posted June 1, 2010 Haven't decided on what amp to get yet but im thinking around 3000rms. I want to get the most out of these subs . Need to know how big and what size port / hz I should tune to. It will be a temp vehical, S-10 extended cab. I have a 8cf box in there already and its only half way up to the seats so im pretty sure I can squeese atleast 12cf back there. I want the lows but also a high spl reading , so what hz should I tune too? Also the 4 subs will be facing my back with the port on the very top of the box since my seat takes over the left side too tight, most do for a better spl reading. Let me know all your comments on this build they all help. Thanks!
Twiztidsetup Posted June 1, 2010 Author Report Posted June 1, 2010 what size subs??? 15's , says in the topic
tackett834 Posted June 1, 2010 Report Posted June 1, 2010 don't those things need at the very least 4 cubic ft. per sub? would you have enough room after porting/bracing? I have also heard that they need to be tuned slightly high
Guest Posted June 1, 2010 Report Posted June 1, 2010 "15-inch subs work in 3.0-4.5 net cuft." ...straight from the AQ site. honestly bro, if you have to ask how big a box has to be and how big and long a port has to be for 4 15's, you're not even close to being ready for a system of that size
Twiztidsetup Posted June 1, 2010 Author Report Posted June 1, 2010 "15-inch subs work in 3.0-4.5 net cuft." ...straight from the AQ site. honestly bro, if you have to ask how big a box has to be and how big and long a port has to be for 4 15's, you're not even close to being ready for a system of that size Not to brag but ive had 2 l5s ,2 l7s fully powered, made fiberglass custom enclosures for resale,4 kicker cvr's and 1 mtx 9500. Wired every single one of my friends cars there whole life including mine. I am new to the audioque and im actually going for a score this time and was wondering what boxes are doing the best on the termlab with these. Btw im getting the Crescendo 3k and wiring it to .5ohm with 3 deka 9a31 batts.
alan412 Posted June 1, 2010 Report Posted June 1, 2010 Not to brag but ive had 2 l5s ,2 l7s fully powered, made fiberglass custom enclosures for resale,4 kicker cvr's and 1 mtx 9500. Wired every single one of my friends cars there whole life including mine. I am new to the audioque and im actually going for a score this time and was wondering what boxes are doing the best on the termlab with these. Btw im getting the Crescendo 3k and wiring it to .5ohm with 3 deka 9a31 batts. (Headunit) Pioneer DEH-P3100UB (Speakers) Phoenix Gold RSd 65cs (4 Channel) Alpine MRP-F300 (Subs) 2 15" Audioque SDC2.5 (Box) 7.27 cubic feet tuned to 31 Hz (Mono Amplifier) Elemental Designs Nine.1 (Wiring) 1/0 Knukonceptz KLMX (Batteries) 2 C&D Tech 75 a/h
Twiztidsetup Posted June 2, 2010 Author Report Posted June 2, 2010 I was explaining to the person above for saying that he thinks im not ready for a system that big. I was trying to get a box figure in my head for some good spl . You cant throw any 4 15s in the same box and have it sound the same. I needed experience on these. Laugh it up tough guy .
bassl0va Posted June 2, 2010 Report Posted June 2, 2010 Measurements would help, then we can give ideas. I'd tune from 35-38hz, that should give good spl and decent low notes. My RE MT 18" wall build Former build, farewell beloved wall.In progress, Toyota Starlet build This forum has a massive boner for ridiculous electrical upgrades.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.