TeamHT Posted June 5, 2010 Report Share Posted June 5, 2010 simple enough, really need some syncs for my t4000s. 3 preferably, 1 min!!! pm me with your cell and i guarantee you will be compensated justly Quote Tell me...does this smell like chloroform to you? Link to comment Share on other sites More sharing options...
wL<3bass Posted June 5, 2010 Report Share Posted June 5, 2010 You don't need sync cables... Use the master/slave and the output and it does the same exact thing as the bd-sync cable, and its cheaper... Quote Vehicle: 1997 S10 Blazer 4dr 4X4 Exterior: Rear End Bagged, Black Grill, Lifted 2" Amplifiers: Rockford Fosgate T8004 & T10001bd Batteries: 2 Stinger SPV35, Kinetik HC2400 Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube) Headunit: Eclipse CD3200 w/ 80G iPod Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors) Subwoofers: 1 15" Fi BL Fully Loaded Wire: All 1/0g Kicker Hyperflex My YouTube Videos My Fiberglass A-Pillar Build My "Seamless" Looking Box Build My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer) My Stealth 8" Fiberglass Build (for '05 TrailBlazer) My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk My feedback/references... Link to comment Share on other sites More sharing options...
hdorre Posted June 5, 2010 Report Share Posted June 5, 2010 You don't need sync cables... Use the master/slave and the output and it does the same exact thing as the bd-sync cable, and its cheaper... His subs might be 2 ohms though. If you want full power and have a final load of 2 ohms, you need the cable. If the final load of the sub is 1 ohm, you would do master/slave. Quote On 5/8/2011 at 7:38 PM, Kranny said: On 5/8/2011 at 7:35 PM, 'Maxim' said: It hurts me inside when I read stuff like this and remember you're 15 LMFAO so true Mitsubishi 3000GT (Old Build) Headunit: Pioneer 80PRS Frontstage: (2) McLaren Audio MLT-2 Tweeters & (4) PRV Audio MR Series Neo 6.5" Mids Substage: 4 15" Hybrid Subs - Tantric Motors & Sundown Softies Amps: Banda 2.4D Amp (Tweets), American Bass VFL 350.4 (Mids), and (2) Ampere 3800s Electrical :Singer 260A Alt & JY Power Lithium 2005 Chevy Colorado Ext Cab Headunit: Pioneer 80PRS Frontstage: 4 PRV 700Ti Tweets & 6 10" Delta Mids on 3000wrms Substage: 6 Fi BTL 18s in a 4th Order Walkthrough on 3 Wolfram 4500s Electrical: Singer "390" and JY Power My Official Feedback Thread Link to comment Share on other sites More sharing options...
TeamHT Posted June 5, 2010 Author Report Share Posted June 5, 2010 His subs might be 2 ohms though. If you want full power and have a final load of 2 ohms, you need the cable. If the final load of the sub is 1 ohm, you would do master/slave. thank you, the subs are 2ohm Quote Tell me...does this smell like chloroform to you? Link to comment Share on other sites More sharing options...
johnnycage Posted June 5, 2010 Report Share Posted June 5, 2010 i am a noob to audio but am down to learn. please explain, i have 2 t4ks but no subs. you said if you dont have sync cables to wire it master/slave? can you please explain how? or what you mean by master/slave? Quote 2007 Cadillac Escalade Alpine Headunit Infinnity Kappa 6.5" components powered by 250.2 kicker amp Currently sitting in my garage waiting to be installed: 3 18" Ascendant Audio Mayhems 3 Rockford Fosgate T40001bds 6 kinetiks batteries dual 300 amp alternators from Iraggi Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.