Need a double check on my box design(pg 2)

[Freshman6969]

Alright well shortly ill be in possession of a DC lvl4 with lvl 5 coil and an extra spider, ill be throwing ROUGHLY 2k watts on it, i do not have an amp as of yet but once i get my system sold ill be on that, if anyone could draw me a box up with all the lengths and such thatd be great, pref tuned to 35-37 hertz, its gunna be for daily use, my cars in my sig im not 100% sure on my cargo area dimensions but heres a pic, this is the same as mine, i need the rear seats so keep that in mind and i want it to fit in between the wheel wells, anyway http://www.wjjeeps.com/interior/cargo_area_dimen_02.jpg ill go out and measure it tomorrow to get exact, thanks in advance guys

Edit: page 2 need a double check on a design

Edited July 8, 2010 by Freshman6969

[Freshman6969]

TTT

[AI James]

i charge for my designs but anyone who is trying to help you will need those measurements before they can create you a box of any kind

[thepolicerhere]

i charge for my designs but anyone who is trying to help you will need those measurements before they can create you a box of any kind

James, please check out my post in subs/enclosures. Need your help. Have money. Thanks.

[Freshman6969]

i charge for my designs but anyone who is trying to help you will need those measurements before they can create you a box of any kind

yeah ima hop on that later, thanks

[Freshman6969]

got some numbers for you peoples, Max Dementions are

Height-17 1/2" (thats from floor to window line)

Width-36" wide( Wheel well to Wheel well)

Depth- 25"

[Freshman6969]

bumpity, gunna need it tuned to 37hz, about 4.5 cubes total, anyone wanna draw me up a design here!? need full mesurements too please!

[Freshman6969]

bumpage sub should be here next week! so gunna need this design ASAP any help is appreciated!

4.5 cubes and tuned to 37hz!

Edited June 23, 2010 by Freshman6969

[Alex K]

I got this in torres calc.

Height: 17"

Width: 35"

Depth: 25"

Port Height: 15.5"

Port Width: 4.5"

Port Length: 25"

Guestimate:

Sub displacement: .21

Bracing (figure couple 2x4's) : .2

1 extra baffle for your main baffle to be 1.5 inches

Comes out to 5 cubic feet, 70 inches of port, tuned to 34 hertz.

[Freshman6969]

I got this in torres calc.

Height: 17"

Width: 35"

Depth: 25"

Port Height: 15.5"

Port Width: 4.5"

Port Length: 25"

Guestimate:

Sub displacement: .21

Bracing (figure couple 2x4's) : .2

1 extra baffle for your main baffle to be 1.5 inches

Comes out to 5 cubic feet, 70 inches of port, tuned to 34 hertz.

thanks, but need 4.5 and 37 hz, and also a model, in some type of program, but thanks for trying BUMP!