TLEJ Posted July 10, 2010 Report Share Posted July 10, 2010 (edited) So, I've got 2 of these, http://www.caraudiodeals.com/kicker-07cvr154-p-944.html DVC, 4 ohm. 500RMS (250 per coil), 1000PEAK and 2 of these, http://www.woofersetc.com/p6789/Q-6001-Image-Dynamics-1Channel-600-Watt-Amplifier.htm 4-Ohms: 1 x 200 watts RMS 2-Ohms: 1 x 400 watts RMS 1-Ohms: 1 x 600 watts RMS What do I do D: Edited July 10, 2010 by TLEJ Quote Link to comment Share on other sites More sharing options...
Team_DC-Derrick Posted July 10, 2010 Report Share Posted July 10, 2010 wire each one to each amp at 2 ohms, and gain match each amp Quote The DC Integra 3 18s to 6 15 build log Team_DC-Derrick's Youtube Team DC Audio where theres a will theres a wall....... I just realized Steve has reach Voldemort status, over on JP's site he is the one who will not be named....."We dont speak his name over here, fearing it will destroy us" LOL not even in hush tones Link to comment Share on other sites More sharing options...
TLEJ Posted July 10, 2010 Author Report Share Posted July 10, 2010 How's this look: Quote Link to comment Share on other sites More sharing options...
c_stud Posted July 10, 2010 Report Share Posted July 10, 2010 do this with each sub Quote 1998 Nissan 200sx NOW: Dex-p98r head Planet Audio 300.4 mids and highs Planet Audio/Pioneer tweeters/crossovers Skar SK1500.1 3 SKAR Vvx15 dual 4 wired at .63 Link to comment Share on other sites More sharing options...
TLEJ Posted July 10, 2010 Author Report Share Posted July 10, 2010 That's what I drew, kinda, because.. On the Kicker 15, that's how the terminals are.. so I have no clue which coil is which because it could go both ways.. Quote Link to comment Share on other sites More sharing options...
Team_DC-Derrick Posted July 10, 2010 Report Share Posted July 10, 2010 one should have either a red dot on the end and a black dot on the end, or a + and - on it.. red dot is pos, black dot is neg Quote The DC Integra 3 18s to 6 15 build log Team_DC-Derrick's Youtube Team DC Audio where theres a will theres a wall....... I just realized Steve has reach Voldemort status, over on JP's site he is the one who will not be named....."We dont speak his name over here, fearing it will destroy us" LOL not even in hush tones Link to comment Share on other sites More sharing options...
wL<3bass Posted July 10, 2010 Report Share Posted July 10, 2010 How's this look: Yu don't have the jumpers for the other coil so thats wrong... The way that drawing is you would only have one of two coils hooked up and it would be at 4ohm. Quote Vehicle: 1997 S10 Blazer 4dr 4X4 Exterior: Rear End Bagged, Black Grill, Lifted 2" Amplifiers: Rockford Fosgate T8004 & T10001bd Batteries: 2 Stinger SPV35, Kinetik HC2400 Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube) Headunit: Eclipse CD3200 w/ 80G iPod Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors) Subwoofers: 1 15" Fi BL Fully Loaded Wire: All 1/0g Kicker Hyperflex My YouTube Videos My Fiberglass A-Pillar Build My "Seamless" Looking Box Build My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer) My Stealth 8" Fiberglass Build (for '05 TrailBlazer) My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk My feedback/references... Link to comment Share on other sites More sharing options...
TLEJ Posted July 10, 2010 Author Report Share Posted July 10, 2010 Ah, yea I see a SMALL white dot on the ends of a set of terminals. Ok, and yea, I mean't to have the jumpers on there. But these amplifiers are 1200rms watts all together, and the subs are 1000rms. Is there no way to get just 1000rms out of the amps? Quote Link to comment Share on other sites More sharing options...
wL<3bass Posted July 10, 2010 Report Share Posted July 10, 2010 (edited) 2ohms is the lowest ohm load you can wire each woofer... so each amp will see a 2ohm load and each amp is rated at 400wrms @ 2ohm. The subs are rated at 1-500wrms each, you'll be giving each sub 400wrms... Edited July 10, 2010 by wL<3bass Quote Vehicle: 1997 S10 Blazer 4dr 4X4 Exterior: Rear End Bagged, Black Grill, Lifted 2" Amplifiers: Rockford Fosgate T8004 & T10001bd Batteries: 2 Stinger SPV35, Kinetik HC2400 Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube) Headunit: Eclipse CD3200 w/ 80G iPod Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors) Subwoofers: 1 15" Fi BL Fully Loaded Wire: All 1/0g Kicker Hyperflex My YouTube Videos My Fiberglass A-Pillar Build My "Seamless" Looking Box Build My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer) My Stealth 8" Fiberglass Build (for '05 TrailBlazer) My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk My feedback/references... Link to comment Share on other sites More sharing options...
TLEJ Posted July 10, 2010 Author Report Share Posted July 10, 2010 Is that the same thing as ? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.