dereileak Posted March 30, 2011 Report Share Posted March 30, 2011 need to make sure the ground on the rca is properly touching the amps ground part, sometimes you may have to take a pliers and bend the ring around the rca in just a bit so it tighter around the rca on the amp, do the same for the heaunit side, if it doesnt ground that, you will get lots and lots of noise Quote 2006 Mazda3 Hatchback Black 5 Spd ManualPioneer 4300DVD2 Sundown SA-12 (34hz Tune, 3.22 cubes, 14.5 inches per cube, Triple Baffle)Kicker 10ZX2500.1 (2845 RMS) Sub AmpKicker 11ZX650.4 (705 RMS) Mid Amp -- (3 Amps)Kicker KQ3 Active CrossoverKicker KQ30 EqualizerKicker 09QS60.2 Components (Woven Carbon Cones)Kicker 09QS65.2 Components (Woven Carbon Cones) - (3 Sets)2/0 Gauge Electron Beam Technologies (3 Runs, 2 +, 1 -) 1/0 Gauge KNU Kollasal Flex (1 Run for -) 300 Ft Kicker X-Series 16 Gauge Speaker WireXS Power D3400 (Rear)XS Power D3100 (Front)Singer Externally Regulated Alternator (Being Built)+ The Love for Car Audio and BASS <3UBL Build Log <------- Click Here-------> Normal Build Log (For Comments) Link to comment Share on other sites More sharing options...
crunkjuice1 Posted March 30, 2011 Report Share Posted March 30, 2011 thats a good trick I will try that. Quote Link to comment Share on other sites More sharing options...
Beanz Posted March 30, 2011 Report Share Posted March 30, 2011 http://cgi.ebay.com/ebaymotors/PAC-OEM-Integration-RCA-Ground-Loop-Isolator-SNI-1-/370491737344 THIS IS ALL YOU NEED no joke i had some BAD engine noise and as soon as i hooked it up NOISE WAS GONE...if it dont work after you plug it in make sure you ground the wire that it comes with like to your cd player trust me you wont me dissapointed Quote That's why they don't deliver. Yer ass better go sit along the side of the road and wait. You can't expect them to travel up some dirt road in a hick / back woods town. Thats how horror movies start I explain things very simply and use analogies in terms of Pickles, and grape drink, pool noodles and jackhammers...if you can't put 2 and 2 together there man, There simply is not much more I can do. Link to comment Share on other sites More sharing options...
wizart383 Posted March 30, 2011 Report Share Posted March 30, 2011 Maybe your RCAs and power wire are too close and causing the noise Quote Link to comment Share on other sites More sharing options...
WhiteTB Posted March 30, 2011 Report Share Posted March 30, 2011 Ive ran different RCA's to the amp and still had the problem. Its not the RCA's its defiantly the ground wires I have coming from the front to the back. I unhooked those a put a short wire hooked up to the seat bolt and boom noise gone. As soon as I put the ones from the front back on Noise again. I just don't understand why that is as I hear many people have ran grounds directly from the front battery to the rear with no problem Quote Team DOA Team gg Link to comment Share on other sites More sharing options...
DannyV18 Posted March 30, 2011 Report Share Posted March 30, 2011 Maybe your RCAs and power wire are too close and causing the noise 'Tis a myth. Quote Link to comment Share on other sites More sharing options...
WillPwn4Food Posted March 30, 2011 Report Share Posted March 30, 2011 Are you charging your ipod as it's hooked up or something? I notice when I plug in my cell phone charger, and am charging my ipod off of that, I sometimes get engine noise in my speakers. Quote Wall build: http://www.stevemeadedesigns.com/board/topic/174827-walled-taurus-with-lambo-doors/#entry2571893 real men dont use fuses Neither do moronsSays the guy with lambo doors on his Ford Taurus. Link to comment Share on other sites More sharing options...
dereileak Posted March 31, 2011 Report Share Posted March 31, 2011 Maybe your RCAs and power wire are too close and causing the noise 'Tis a myth. I would say yea, for the most part, cause rcas have shielding, and also because they are twisted, so you really dont have to worry about noise, unless you bought some ghetto wtf rca's, ha ha Quote 2006 Mazda3 Hatchback Black 5 Spd ManualPioneer 4300DVD2 Sundown SA-12 (34hz Tune, 3.22 cubes, 14.5 inches per cube, Triple Baffle)Kicker 10ZX2500.1 (2845 RMS) Sub AmpKicker 11ZX650.4 (705 RMS) Mid Amp -- (3 Amps)Kicker KQ3 Active CrossoverKicker KQ30 EqualizerKicker 09QS60.2 Components (Woven Carbon Cones)Kicker 09QS65.2 Components (Woven Carbon Cones) - (3 Sets)2/0 Gauge Electron Beam Technologies (3 Runs, 2 +, 1 -) 1/0 Gauge KNU Kollasal Flex (1 Run for -) 300 Ft Kicker X-Series 16 Gauge Speaker WireXS Power D3400 (Rear)XS Power D3100 (Front)Singer Externally Regulated Alternator (Being Built)+ The Love for Car Audio and BASS <3UBL Build Log <------- Click Here-------> Normal Build Log (For Comments) Link to comment Share on other sites More sharing options...
sprkn_ranger Posted March 31, 2011 Report Share Posted March 31, 2011 Maybe your front battery isn't grounded real well? Its weird you get it when you hook up the runs from front to back. Quote Check out my build log! 4 Havocs in a blowthrough http://www.stevemeadedesigns.com/board/topic/187506-sprkn-rangers-blowthrough-build/ Link to comment Share on other sites More sharing options...
MustangGT Posted March 31, 2011 Report Share Posted March 31, 2011 I also have the same problem I tried putting new rcas and nope I still have it . any suggestions? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.