8 12s 1 WAGON

[capalass23]

la crosse wi

[neuspeedescort]

in the video, it look like some weren't playing?...

And maybe the subs closest to the port are acting as freeair?...

and maybe youll get more dbs if you tune that box higher.

so manyyyyy thangsss lol.

I would double check the wiring, don`t know it was the cameras fault, but it looked like you have some phase issues.

i agree! i saw some subs not firing. but then it could just be that camera playing tricks.

NEUMAN

[capalass23]

maybe this will help some

[djdew23]

i have the same subs. you need to rethink your box each sub needs at least 1.75 cubes ported. my box for 4 12s is 8 cubes tuned at 32hrz with 1 6" port and pounds.for your 8 subs you need at least 14 cubes. and thats going by what hifonics manule says.im not trying to be a dick just help get you going the rite way.id build the box like 16cubes then add your braceing in

[djdew23]

double post

[smokeumtires]

Are all the subs wired with the EXACT same length speaker wire?

If the subs wires are "Branched" all the way down the last speaker will receive less power than the front...

EXACT length wires for each subs, Even the ones in the front, will make a HUGE difference

[capalass23]

time to buy some more wire lol

[VOPA]

Are all the subs wired with the EXACT same length speaker wire?

If the subs wires are "Branched" all the way down the last speaker will receive less power than the front...

EXACT length wires for each subs, Even the ones in the front, will make a HUGE difference

I am not trying to single you out, but electrically, this is just not true. A meaurable difference can be seen as far as millivolts (.001) can be seen on the speaker terminals due to drastic length difference in wire. In a world of doubling power to gain 3db and an saz-2000d which is supposed to be capable of 44.72Vrms +/-10%, millivolts dont amount to shit.

[VOPA]

To Further exemplify my point, I offer this example. I will even show it at nominal impedance which will inflate the numbers and make them look bigger than what they are in a real world application such as this sub setup in the wagon. Each sub being wired in series and the parraleled to the output of the amp gives 8 individual branch currents. At rest, we can see a potential of 5.59 amps rms per branch (subwoofer). Wire size and length when considering less than 6 amps is insignificant. While the system plays, we are talking less current due to inductive loading

What would I know, it is not like I am an electrical engineer or anything...

What if i am?

[MADVIBES]

To Further exemplify my point, I offer this example. I will even show it at nominal impedance which will inflate the numbers and make them look bigger than what they are in a real world application such as this sub setup in the wagon. Each sub being wired in series and the parraleled to the output of the amp gives 8 individual branch currents. At rest, we can see a potential of 5.59 amps rms per branch (subwoofer). Wire size and length when considering less than 6 amps is insignificant. While the system plays, we are talking less current due to inductive loading

What would I know, it is not like I am an electrical engineer or anything...

What if i am?

I am going to agree with this dude 100 percent. Think about electrical current and how fast it moves. an extra foot of wire is not going to be measureable. If anything, resistance would go up.