hatrix Posted August 25, 2010 Report Posted August 25, 2010 So in my car i currently have the following: Fi SSD 18" w/ 9cuft box @ 32hz Old 380w soundstream amp powering it (temporarily) Alpine SPR-13S components Hifonics HFi100.2 for the alpines Pioneer DEH-2100IB I have a set of 8 gauge wire running to the soundstream amp as its only 15 amps. The Hifonics has 4 gauge wire. I recently got the hifonics for my front stage. Before i installed it there was no buzzing in my speakers. Once i installed it I had a buzzing problem. So, ok, ground issue. I redid all my grounds. Grounds coming off battery: First ground: Second ground: First amps ground: Second amps ground & head unit ground (no metal behind head unit to ground to): Didn't fix the buzzing problem. So I rerouted my RCAs which were on the same side as the power wiring, thinking that must be the problem. Still didn't fix it. I was told about the pico fuse problem with Pioneer decks, so i went about soldering the board today, put it back in and still had buzzing. I'm not sure what else to do besides buy a ground loop isolator, but I heard those can degrade sound quality, or half the volume etc. I really want to fix the problem without using one, but I'm lost on this. Anyone have any idea how I can fix this ? Quote Fi SSD 18/ 9cuft @ 32hz
MeanGreen03 Posted August 25, 2010 Report Posted August 25, 2010 I'm in the same boat as you too except I have alternator whine. Very frustrating needless to say! Quote
hatrix Posted August 25, 2010 Author Report Posted August 25, 2010 Oh yea i forgot to add i have alternator whine as well. Quote Fi SSD 18/ 9cuft @ 32hz
killallblue Posted August 25, 2010 Report Posted August 25, 2010 To be ohnest those arnt really good grounds u might wanna find a better place to put them Quote
deeje Posted August 25, 2010 Report Posted August 25, 2010 Dude put a bolt through the chasis and ring terminal those. Those are horrible grounds. Quote --2004 Toyota 4runner New Build Log -2002 Acura Tl-S Old Build Log Team DC Audio spl dust is an option you can get on the coils... it's great for extra 1000 watts of power where can i get this spl dust and how much is it. is it hard to apply? lol
dwz Posted August 30, 2010 Report Posted August 30, 2010 seconded... or thirded... plz fix your grounds Quote
Boon Posted August 30, 2010 Report Posted August 30, 2010 I'm just gonna put it out there that those aren't what I would call good grounds. But the source of your issue, I'm 99% sure, if your Pioneer deck. You've probably blown the fusible link on the RCA circuit, if it has one, or the stupid 'resettable thermal link' they use in the new ones has popped and not reset. Like most of them. Quote 10.x volts fo' life!
hatrix Posted September 6, 2010 Author Report Posted September 6, 2010 The grounds couldn't have been that bad, because i put ring terminals on and bolted all of them. There is still buzzing. And i already soldered my pico fuse on my pioneer, which did absolutely nothing. Quote Fi SSD 18/ 9cuft @ 32hz
deeje Posted September 7, 2010 Report Posted September 7, 2010 They all looked pinched underneath a piece of metal to me and with self tappers. Quote --2004 Toyota 4runner New Build Log -2002 Acura Tl-S Old Build Log Team DC Audio spl dust is an option you can get on the coils... it's great for extra 1000 watts of power where can i get this spl dust and how much is it. is it hard to apply? lol
huh?do-what? Posted September 7, 2010 Report Posted September 7, 2010 how high is your gain on the hifonics amp? Quote God damn its hot today. My balls are stuck to my leg.
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.