55437Audio Posted November 4, 2010 Report Posted November 4, 2010 Subs ordered, Amp ordered, Batts ordered, and I have my Alt, Wire, Boot Seal... As it says above any Excellent person trying to help out on Blow Through design? I would kinda like to get a box design together before I cut away... at max I have a 48 x 12" Cut out in center but then I will have to figure how to move the auto slider motor for my back window... Pm Me or just reply some one who you think might be able to help... Thanks Fellas there's a lot of chill people on here hope to find one good with blow throughs haha Here is a couple Pics of what I got for a cut out. And here is the issue Quote My First Build on SMD (Blow Through) 2004 Ford F-350 SD Lariat Pioneer 3200BT DVD Deck Infinity Reference Components not powered Bully Dog Gauge Cluster Pyro, Turbo, Trans SF3 SCT Tuner W/Customs If you can't Join em' Crush em'
55437Audio Posted November 5, 2010 Author Report Posted November 5, 2010 Sorry to Bump this but is there any one i could speak to about designing me a box or helping with the design? Thanks, Austin! Quote My First Build on SMD (Blow Through) 2004 Ford F-350 SD Lariat Pioneer 3200BT DVD Deck Infinity Reference Components not powered Bully Dog Gauge Cluster Pyro, Turbo, Trans SF3 SCT Tuner W/Customs If you can't Join em' Crush em'
BulletInjection Posted November 5, 2010 Report Posted November 5, 2010 Mike singer just designed one for someone I know. Also Derrick Haddock could possibly design one. Quote My build: http://www.stevemeadedesigns.com/board/ind...8920&st=100 http://www.youtube.com/Bulletinjection
55437Audio Posted November 5, 2010 Author Report Posted November 5, 2010 they on here? or how would I message them? I'm not familiar with the names. Quote My First Build on SMD (Blow Through) 2004 Ford F-350 SD Lariat Pioneer 3200BT DVD Deck Infinity Reference Components not powered Bully Dog Gauge Cluster Pyro, Turbo, Trans SF3 SCT Tuner W/Customs If you can't Join em' Crush em'
kingsuv Posted November 5, 2010 Report Posted November 5, 2010 I'm pretty sure everything you can think of is covered in my build log on mama's 250 Quote Designing, building, and shipping boxes. Yahoo IM - kingsuv00If the listening level is too loud, please inform the driver, so he can promptly pull over, and let you out. not many cars can get me to pluggin my ears but this one.......damn. I mean the first minute is ok but that thing just really starts digging deeper and deeper in your earhole till you cant stand it no more. Seems like it does it with relative ease....16 12's on 8 amps.........gotta love it.
Sanitarium Posted November 5, 2010 Report Posted November 5, 2010 what subs, how much room are you willing to give up, how tall is your bed, are you going to cover it, how much extra clerance does the cover (if used) grant you? Quote
55437Audio Posted November 6, 2010 Author Report Posted November 6, 2010 Ya bill idk how to figure the tune on a box like this though maybe I didn't look hard enough but idk. And I'll get the dimensions tomorrow. Quote My First Build on SMD (Blow Through) 2004 Ford F-350 SD Lariat Pioneer 3200BT DVD Deck Infinity Reference Components not powered Bully Dog Gauge Cluster Pyro, Turbo, Trans SF3 SCT Tuner W/Customs If you can't Join em' Crush em'
55437Audio Posted November 6, 2010 Author Report Posted November 6, 2010 (edited) Well I'll be getting a hard top so I might gain a little maybe a inch or so but about 18" tall and I'd go 5-6' deep I have a long bed. And 4' wide Something we woul have to figure is the angle to get the subs to fit and how to fit it in cause the cut will be 2" off the bottom about and it wil only be 12" tall There will be 2 lvl5 18" subs they will be seeing 2k each maybe a wee little more. Edited November 6, 2010 by 55437Audio Quote My First Build on SMD (Blow Through) 2004 Ford F-350 SD Lariat Pioneer 3200BT DVD Deck Infinity Reference Components not powered Bully Dog Gauge Cluster Pyro, Turbo, Trans SF3 SCT Tuner W/Customs If you can't Join em' Crush em'
hdorre Posted November 6, 2010 Report Posted November 6, 2010 There will be 2 lvl5 18" subs they will be seeing 2k each maybe a wee little more. This is the only post I read, so idk if you already have the subs. If you only have 2k per sub, you should get XLs. If you want to upgrade to 2k per coil, Level 5s Quote On 5/8/2011 at 7:38 PM, Kranny said: On 5/8/2011 at 7:35 PM, 'Maxim' said: It hurts me inside when I read stuff like this and remember you're 15 LMFAO so true Mitsubishi 3000GT (Old Build) Headunit: Pioneer 80PRS Frontstage: (2) McLaren Audio MLT-2 Tweeters & (4) PRV Audio MR Series Neo 6.5" Mids Substage: 4 15" Hybrid Subs - Tantric Motors & Sundown Softies Amps: Banda 2.4D Amp (Tweets), American Bass VFL 350.4 (Mids), and (2) Ampere 3800s Electrical :Singer 260A Alt & JY Power Lithium 2005 Chevy Colorado Ext Cab Headunit: Pioneer 80PRS Frontstage: 4 PRV 700Ti Tweets & 6 10" Delta Mids on 3000wrms Substage: 6 Fi BTL 18s in a 4th Order Walkthrough on 3 Wolfram 4500s Electrical: Singer "390" and JY Power My Official Feedback Thread
55437Audio Posted November 6, 2010 Author Report Posted November 6, 2010 It will be a saz4500 you don't think thy would power lvl 5's just fine? 1ohm Quote My First Build on SMD (Blow Through) 2004 Ford F-350 SD Lariat Pioneer 3200BT DVD Deck Infinity Reference Components not powered Bully Dog Gauge Cluster Pyro, Turbo, Trans SF3 SCT Tuner W/Customs If you can't Join em' Crush em'
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.