Jump to content

Recommended Posts

Ewwwww looks nasty... LoL Means your doing it rite keep up the work

Working on my 93' Ford Bronco rebuild:

I have:
pioneer AVH-P6500
Infinity Reference 6032SI fronts
Infinity Reference 6832CF Rears

Crescendo CZ 6.5 kicks

Crescendo 1100.4

(2) DC Audio LvL 4 M2's

(1) Juicebox Blackcherry
Piece together amps & wiring

Bout to get:
Crescendo Amps

Crescendo Mids

Crescendo Tweets

Sky High Car Audio Wire

Rockford Fosgate 360.2 or .3

My Build

http://www.stevemeadedesigns.com/board/topic/97426-93-ford-bronco-rebuild-full-system-body-paint/

Link to comment
Share on other sites

Decided to go with something like these for my rear deck :

I think after i add a center blow-through port from my trunk that i can still fit two 10's-Full range and two large tweeters, may have to stick with two 8's and two tweets though depending on room !!!

rwhops.jpg
Link to comment
Share on other sites

News on the rear deck, i was having such a hard time deciding on which speakers to go with , that i decided since i have always stuck to a tight budget that i am going to see how cheap i can get this done and still have something that looks sweet and is extremely loud !! Trying to stay within that 65 dollar range for the whole rear deck build !!! I will go and get the fab work and fiber glass mold for the blow-through done today so i can check and see how much room i have for speakers, im thinking will only have room for two 8's and two tweeters in the 3 to 4 inch range !!!

rwhops.jpg
Link to comment
Share on other sites

this build is so sick............NOOB my ass you look like you done this before :drink40::drink40:

2 12" Jeff Vue Customs
1 set MB Quart FSB 216 in doors
1 American Bass 100.1 on sub
1 Hertz EP2 on doors
JVC deck IPOD control
Stock 105 amp alt
DD-1
big 3
new build in Chevy caviler http://www.stevemead...chevy-cavalier/

last set up in the ZX2 http://www.stevemead...-current-build/


old build log http://www.stevemead...-1998-ford-zx2/

Gold is the money of kings, silver is the money of gentlemen, debt is the money of slaves. Just my .02c

that shop needs keep those doors open so they have to charge for it

if people think 10k is a lot then they should get into other hobbies.. like masturbating, cause any hobby cost money to maintain

Lol no, I'm smarter than that bro haha. Fool me once, shame on you, fool me twice..............go fuck yourself lol

Link to comment
Share on other sites

Finally getting back to the rear deck , starting cutting our speaker rings and ordered my pro tweets and resistors;

IMAG0131.jpg

Still doing the old school free hand skill saw cuts !!!

IMAG0132.jpgIMAG0133.jpg

The Tweeters ordered from parts-express;

272-100_s.jpg

And the resistors needed to keep these babies in an operable range ;

004-30_s.jpg

links too resistors and tweets ;

http://www.parts-exp...rtnumber=004-30

http://www.parts-exp...tnumber=272-100

rwhops.jpg
Link to comment
Share on other sites

Damm this is a super sick install !! Great work man !!!

this is a badass build...those hifonics are pretty beasty i used 6 of them before i switched to Fi subs... pillars a F****IN sicckkkkkk

Thanks guys !! Well i found some extra supplies i had tucked away in the shop so if i use the 8's i have now or buy some on closeout or egay then it looks like i will have no problem coming in under my 65 dollar budget !! I got such a good deal on the tweeters and resistors that even with shipping and supplies im only bout half-way into my budget , so with a little help from my mom with some fleece i may be able to buy a cheap 100 watt amp to power the deck too !!!!

rwhops.jpg
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 1056 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...