OrionStang Posted November 13, 2010 Report Posted November 13, 2010 Will T-nuts hold if installed on the front? Instead of from behind. I got some 4-prong T-nuts and my POS drill can't pull them into the wood. I was thinking just hammer them into the front. SMD Super Seller My Feedback Thread
CanUFeelMe Posted November 13, 2010 Report Posted November 13, 2010 Find a hex bolt and use it along with a washer and a wrench.... 1999 Chevy S102 Sundown Zv3-10's1 Sundown saz-4500d2 sets of Sundown CS6.5 Comps. (Doors) 2 10" Sundown NeoPro 10's (Doors)1/0 KnuKonceptz - Power x2- Ground- Big 3 300 Amp External Regulated Excessive Amperage Alt 147.8 Sealed Mic on Windshiled148 30sec. Average Drivers Door open Mic on Windshield Check Out my YouTube Channel --->>> http://www.youtube.com/user/dmntyo2007?feature=guidehttp://www.stevemead...ld-competition/
AMI CUSTOMS Posted November 13, 2010 Report Posted November 13, 2010 No, that won't work...LOL TEAM SOUNDQUBED -- TEAM SOUTH TEAM S.O.B. - Founder & Captain 3x Streetbeat World Record Holder 2017 MWSPL 1st place Mayhem & 4th Xtreme 4 2016 MWSPL 1st place Mayhem/2nd Adv 4/2nd Xtreme 4 2015 MWSPL 2nd place Mayhem & 4th Xtreme 4 2014 USACI 2nd place Streetbeat 5 - 162.6 db 2014 MWSPL 2nd place Xtreme 4 - 144.9 db 2013 USACI 1st place Streetbeat 4 - 161.9 db 2013 USACI 1st place Street Q+ - 162.8 db 2013 MWSPL 3rd Kaos2 & 4th Xtreme 4 2011 USACI 2nd place MOD 1001-2k - 160.0 db 2011 MWSPL 4th place: Adv3 - 157.8 db, Kaos2 - 150s db, Xtreme4 - 140s db 2010 ARSPL 1st place 501-750 - 160.3 db Arkansas loudest Best score to date 164.4 db - Termlab Outlaw Streetbeat 4 - 161.9 db Streetbeat 5 - 162.6 db MWSPL on Dash Legal door open (Music) - 162.5 db Sealed on dash Legal (Music) - 161.1 db - Termlab THE BLACK NASTY CURRENT BUILD & FAB The Black Nasty (6) 15 Rebuild Log 2012 (4) 15 Walled Sierra Build Log Evo X build log Facebook page The Black Nasty
OrionStang Posted November 13, 2010 Author Report Posted November 13, 2010 Find a hex bolt and use it along with a washer and a wrench.... Just read that on another website, thanks. No, that won't work...LOL I know, just being lazy. And I like hammering stuff. SMD Super Seller My Feedback Thread
CanUFeelMe Posted November 13, 2010 Report Posted November 13, 2010 I wouldn't recommend hammering them in... In doing so it might make them loose. Just use a wrench and get to turning.... 1999 Chevy S102 Sundown Zv3-10's1 Sundown saz-4500d2 sets of Sundown CS6.5 Comps. (Doors) 2 10" Sundown NeoPro 10's (Doors)1/0 KnuKonceptz - Power x2- Ground- Big 3 300 Amp External Regulated Excessive Amperage Alt 147.8 Sealed Mic on Windshiled148 30sec. Average Drivers Door open Mic on Windshield Check Out my YouTube Channel --->>> http://www.youtube.com/user/dmntyo2007?feature=guidehttp://www.stevemead...ld-competition/
Sanitarium Posted November 13, 2010 Report Posted November 13, 2010 you can use longer bolts and install the nuts on the front with the bolt through from the back then put the sub onto these new "studs" and throw some nuts on to hold the sub in place.
bassl0va Posted November 14, 2010 Report Posted November 14, 2010 Lol, don't do that, because then the subs will just be sitting in the front and there will only be the prongs on the T-nuts holding the sub to the front of the baffle, they won't be clamped to the baffle. My RE MT 18" wall build Former build, farewell beloved wall.In progress, Toyota Starlet build This forum has a massive boner for ridiculous electrical upgrades.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.