Speaker Build, 12" Dvc 1.5ohm Almost Done, Final Pics Commin Tomorrow

[Forevrbumpn]

Final pics... just need a video

let the dome dry over night, hope it holds good

one last coat of rhino liner, yes all the way down to even the surround- it doesnt effect perfomance or quality at all0 been doing this for years- In fact if you have foam surrounds, you can use rubberized undercoating to spray your surrounds for longevity lifespan

epoxied the plastic dowels in place should hold nice and strong, especially with the added 1/4" mdf ring added to the bottom of the mounting lip as a gasket, dowel retainer

always gotta clearcoat the rhino linings for durability and shine!!!!

fresh wet rhino with clear over it, looks grey, but its a nice contoured glossy black just like a DLS sub cone/dome

Thats it for now......

[Forevrbumpn]

man, I hate the glare this camera puts out, no matter how I set the cameras flash or video settings, its always horrible

[ChevyBoy]

so how exactly is this think mounting?

[ChevyBoy]

man, I hate the glare this camera puts out, no matter how I set the cameras flash or video settings, its always horrible

try using it without the flash and have the shutter stay open longer. i forget what its called. but i know what it is on my cam.

[Forevrbumpn]

its raised up almost 1.5" over usual mounting, its basically 3 layers of MDF compressed together, painted with rhino lining, clear coated, dont get the mdf rings underestimated, they are strongly built... The dowels are for about a size 8 screw, about 2" long if useing t-nuts wich I always recommend, or, I guess about the same if self tapping screws... only 6 screw holes, but they are further out from center, so they should hold alot better than the usual tight 5/8"s lip on regular frame woofers

[Forevrbumpn]

when I take flash off, its blurry, oh well... Iam going to go take 1 final pic not so close, to get a total view

[ChevyBoy]

if you move the slightest without the flash they become blurry.

[Forevrbumpn]

I noticed about the blurry part.... cant even BREATH....

here are full size pics

Just cuz the lip on the frame looks huge, doesnt mean that magnet is light, it is 225oz of ferrite, and about another 10lbs of back plate and top plate, rear vented, commin in about 50lbs as built now

this is a 12" sub with a 14" lip eat your heart out 13w7 hah... jk

[JustinT]

now just to hook it up

[LSN2meBoom916]

Nice trick w/ the mdf.

Looks pimp too.

Great looking stuff I'd love to see how it performs.

Keep us posted.