BanginOnABudget Posted November 25, 2010 Report Posted November 25, 2010 (edited) just let me know the ohm load of the driver/s you want the crossover to support, band pass, narrow band pass, low pass, or high pass, wether you want (-6db, -12db, or -16db slope) and the frequency you want to cross at, i will make a diagram for you in paint and PM it to you, but requests go in this thread. lets start with one i did for an example. Edited November 25, 2010 by BanginOnABudget Quote im taking out my passenger seat, battery is disconnected, going to unwire and take out the three amps, take out the 70+ lb box, then the platform so i can crimp 1 wire. Almost as bad as those fegs that put those horns in their grills and roll down the street distorting the block.... 1990 Jeep Cherokee 2 Dr. Big-3 in 0g on Stock Alt. Pioneer 6.5" and 5.25"s temp. until i can afford the new crescendos. Pioneer 6000ub Reciever NO amps at the moment. SA-15 on 1kw coming soon. MSG Me for a free enclosure design!! Flared port kits coming soon!!
Autruche Posted November 25, 2010 Report Posted November 25, 2010 Interesting stuff. Where do you get your capacitors from? I've been having trouble trying to find ~400 and ~300 microfarad non-polarized capacitors to build my own bass blockers. Quote Need Test Tones/Sine Waves? Click Here!My Saab 9000 build1993 Saab 9000 Aero 5spdPioneer - Zapco - Hifonics - Sundown Audio - O2 Audio - RE AudioJust Say No To Rear SpeakersJust Say No To CCA WireReal Men Drive StickHit me up on Facebook, if you want
BanginOnABudget Posted November 25, 2010 Author Report Posted November 25, 2010 (edited) parts express man. you want to check the power rating on them before you buy tho. 400 http://www.parts-express.com/pe/pshowdetl.cfm?Partnumber=027-376 320 http://www.parts-express.com/pe/pshowdetl.cfm?Partnumber=027-372 500 http://www.parts-express.com/pe/pshowdetl.cfm?Partnumber=027-378 what would you block with those? its like 50-65 hz on an 8 ohm load. mids huh? lol. Edited November 25, 2010 by BanginOnABudget Quote im taking out my passenger seat, battery is disconnected, going to unwire and take out the three amps, take out the 70+ lb box, then the platform so i can crimp 1 wire. Almost as bad as those fegs that put those horns in their grills and roll down the street distorting the block.... 1990 Jeep Cherokee 2 Dr. Big-3 in 0g on Stock Alt. Pioneer 6.5" and 5.25"s temp. until i can afford the new crescendos. Pioneer 6000ub Reciever NO amps at the moment. SA-15 on 1kw coming soon. MSG Me for a free enclosure design!! Flared port kits coming soon!!
BanginOnABudget Posted November 25, 2010 Author Report Posted November 25, 2010 bumping out of boredom. if you're getting some speakers on black friday a crossover is a must! just supply the info above :3 Quote im taking out my passenger seat, battery is disconnected, going to unwire and take out the three amps, take out the 70+ lb box, then the platform so i can crimp 1 wire. Almost as bad as those fegs that put those horns in their grills and roll down the street distorting the block.... 1990 Jeep Cherokee 2 Dr. Big-3 in 0g on Stock Alt. Pioneer 6.5" and 5.25"s temp. until i can afford the new crescendos. Pioneer 6000ub Reciever NO amps at the moment. SA-15 on 1kw coming soon. MSG Me for a free enclosure design!! Flared port kits coming soon!!
Autruche Posted November 25, 2010 Report Posted November 25, 2010 (edited) parts express man. you want to check the power rating on them before you buy tho. 400 http://www.parts-express.com/pe/pshowdetl.cfm?Partnumber=027-376 320 http://www.parts-express.com/pe/pshowdetl.cfm?Partnumber=027-372 500 http://www.parts-express.com/pe/pshowdetl.cfm?Partnumber=027-378 what would you block with those? its like 50-65 hz on an 8 ohm load. mids huh? lol. Different impedance loads will have different cutoff frequencies. For instance, with 4 ohm loads a 200 microfarad cuts at 200Hz a 320 would be about 150Hz a 400 will cut out at 100Hz and a 500 would be around 75Hz. Thanks for the links. Edited November 25, 2010 by lAutruche Quote Need Test Tones/Sine Waves? Click Here!My Saab 9000 build1993 Saab 9000 Aero 5spdPioneer - Zapco - Hifonics - Sundown Audio - O2 Audio - RE AudioJust Say No To Rear SpeakersJust Say No To CCA WireReal Men Drive StickHit me up on Facebook, if you want
Benji0687 Posted November 25, 2010 Report Posted November 25, 2010 Can you explain the difference between bandpass and narrow bandpass? Thanks dude, this thread brought up a topic I've been wanting to learn more about for some time. Quote 1989 Chevy Caprice Classic350ci V8 High Performance JVC Arsenal HU JL XR series components Infinity Reference 6x9s Pioneer Premier 4-Channel Clarion 2-Channel Rockford Fosgate Series 1 2-Channel Fusion 2000.1D MTX Crossover RF, Knu, Kicker, and Monster wiring NVX VCW 12in. Sub **Won on here from the Sonic contest!** *Build log coming soon!* Starting all over pretty much which the gear listed...lost almost everything I had, including my life. Never take life and what's in it for granted.
BanginOnABudget Posted November 25, 2010 Author Report Posted November 25, 2010 (edited) Can you explain the difference between bandpass and narrow bandpass? Thanks dude, this thread brought up a topic I've been wanting to learn more about for some time. bandpass has a slope going up, its flat for a bit, and then drops back off, a narrow bandpass is a small certain range of frequencies then sharp drop offs. i just went to the12volt one night and messed with crossover values on the calculator, turns out this stuff is easy as dirt to learn. Edited November 25, 2010 by BanginOnABudget Quote im taking out my passenger seat, battery is disconnected, going to unwire and take out the three amps, take out the 70+ lb box, then the platform so i can crimp 1 wire. Almost as bad as those fegs that put those horns in their grills and roll down the street distorting the block.... 1990 Jeep Cherokee 2 Dr. Big-3 in 0g on Stock Alt. Pioneer 6.5" and 5.25"s temp. until i can afford the new crescendos. Pioneer 6000ub Reciever NO amps at the moment. SA-15 on 1kw coming soon. MSG Me for a free enclosure design!! Flared port kits coming soon!!
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.