Cadillac_Fresh Posted December 8, 2010 Author Report Share Posted December 8, 2010 That doesn't make any sense...I have never seen single voice coil BTLs... Hmm maybe Im reading it wrong? Dunno. Click Here<-- This is the specs for it, I got the n212's No worries, learning is life. But the link takes me to the specs, but do not specify D1 or d2. Knowing this will be important when figuring out an amp, and how it is wired. Yeah theres an option there that lets you select whether its d1 or d2 all the specs are custom made for the buyer and they machine it, then send it. Quote Link to comment Share on other sites More sharing options...
TeamHT Posted December 8, 2010 Report Share Posted December 8, 2010 Audiopipe 3k puts out close to 3,000 at 2ohm or 1500 x 2 at 1ohm for around $300. not the cleanest output but gets the job done Which still is not a very good suggestion for two subs which RMS at 2000 watts. One AP3000 per sub maybe but for the money I would much rather the AQ2200 Quote Tell me...does this smell like chloroform to you? Link to comment Share on other sites More sharing options...
TeamHT Posted December 8, 2010 Report Share Posted December 8, 2010 That doesn't make any sense...I have never seen single voice coil BTLs... Hmm maybe Im reading it wrong? Dunno. Click Here<-- This is the specs for it, I got the n212's No worries, learning is life. But the link takes me to the specs, but do not specify D1 or d2. Knowing this will be important when figuring out an amp, and how it is wired. Yeah theres an option there that lets you select whether its d1 or d2 all the specs are custom made for the buyer and they machine it, then send it. I know, lol, the point is do you have dual 1 ohm or dual 2 ohm. Quote Tell me...does this smell like chloroform to you? Link to comment Share on other sites More sharing options...
Cadillac_Fresh Posted December 8, 2010 Author Report Share Posted December 8, 2010 That doesn't make any sense...I have never seen single voice coil BTLs... Hmm maybe Im reading it wrong? Dunno. Click Here<-- This is the specs for it, I got the n212's No worries, learning is life. But the link takes me to the specs, but do not specify D1 or d2. Knowing this will be important when figuring out an amp, and how it is wired. Yeah theres an option there that lets you select whether its d1 or d2 all the specs are custom made for the buyer and they machine it, then send it. I know, lol, the point is do you have dual 1 ohm or dual 2 ohm. Im soo confused haha, I have no idea. Quote Link to comment Share on other sites More sharing options...
TeamHT Posted December 8, 2010 Report Share Posted December 8, 2010 If you have your receipt I would double check your information. the voicecoil configuration is what you're going to need to know when picking an amp and how it is wired. Quote Tell me...does this smell like chloroform to you? Link to comment Share on other sites More sharing options...
REMT15 Posted December 8, 2010 Report Share Posted December 8, 2010 TeamHT. I agree. just going off the $700 he mentioned lol. i would save up and run a SD8k ! Quote Link to comment Share on other sites More sharing options...
831Arevalo Posted December 8, 2010 Report Share Posted December 8, 2010 U I suggest alpine mrp_m2000 rated 2000rms at 2ohms and there 450 a piece Ive heard those amps run pretty hot, and would think the btl fully loaded would laugh at that. I heard alot of good review about that amp never heard if a bad one also I heard wired 2 ohms puts less stress on the amp and well theres not really any amo thats does 2000 rms at 2 ohms Quote Link to comment Share on other sites More sharing options...
ingramcaraudio Posted December 8, 2010 Report Share Posted December 8, 2010 U I suggest alpine mrp_m2000 rated 2000rms at 2ohms and there 450 a piece Ive heard those amps run pretty hot, and would think the btl fully loaded would laugh at that. I heard alot of good review about that amp never heard if a bad one also I heard wired 2 ohms puts less stress on the amp and well theres not really any amo thats does 2000 rms at 2 ohms Rockford 2500bdcp 2500 watts rms at 2 ohm. Quote Facebookhttp://www.facebook.com/#!/pages/Farmville-VA/Rockwell-Audio/103036213076623?ref=ts Link to comment Share on other sites More sharing options...
Chris from Mi Posted December 8, 2010 Report Share Posted December 8, 2010 (edited) That doesn't make any sense...I have never seen single voice coil BTLs... Hmm maybe Im reading it wrong? Dunno. Click Here<-- This is the specs for it, I got the n212's No worries, learning is life. But the link takes me to the specs, but do not specify D1 or d2. Knowing this will be important when figuring out an amp, and how it is wired. Yeah theres an option there that lets you select whether its d1 or d2 all the specs are custom made for the buyer and they machine it, then send it. I know, lol, the point is do you have dual 1 ohm or dual 2 ohm. Im soo confused haha, I have no idea. what are you confused about? The sub has an option of having to coils per sub that have a resistance of about 1 ohm or 2 ohm each. heres a link to a great site for info, if your not going to be installing these for a while, i suggest you read this sight for many hours to get a hang of whats going on. www.bcae1.com Edited December 8, 2010 by Chris from Mi Quote Orion 2500D, Jbl Gto 75.4 Team Wolfpack Audio FSQ 15" d2, mb quart xover, tweets peerless 6.5 mids Alpine cda-105 optima up front Knu klm 1/0 Link to comment Share on other sites More sharing options...
hdorre Posted December 8, 2010 Report Share Posted December 8, 2010 Rockford 2500bdcp 2500 watts rms at 2 ohm. You mean about 3300wrms @ 2 ohms Quote On 5/8/2011 at 7:38 PM, Kranny said: On 5/8/2011 at 7:35 PM, 'Maxim' said: It hurts me inside when I read stuff like this and remember you're 15 LMFAO so true Mitsubishi 3000GT (Old Build) Headunit: Pioneer 80PRS Frontstage: (2) McLaren Audio MLT-2 Tweeters & (4) PRV Audio MR Series Neo 6.5" Mids Substage: 4 15" Hybrid Subs - Tantric Motors & Sundown Softies Amps: Banda 2.4D Amp (Tweets), American Bass VFL 350.4 (Mids), and (2) Ampere 3800s Electrical :Singer 260A Alt & JY Power Lithium 2005 Chevy Colorado Ext Cab Headunit: Pioneer 80PRS Frontstage: 4 PRV 700Ti Tweets & 6 10" Delta Mids on 3000wrms Substage: 6 Fi BTL 18s in a 4th Order Walkthrough on 3 Wolfram 4500s Electrical: Singer "390" and JY Power My Official Feedback Thread Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.