woodzyspl Posted December 29, 2010 Report Posted December 29, 2010 ok i thought i had this and new what i was doing dual 2ohm sub wired to 1ohm.. 12volt says conect a wire from + to + and - to - on the sub is this just a simple one pice of speaker wire conecting the sides.. cause when saw my mates that a shop did..comeing out the box was a 3rd wire that didnt conect to the amp or anything it was just siting there and i was so confused (iv done nothing above 200watts in a system) then do i conect + on one side of the sub to + on amp and on other side of the sub the - to - on amp.. AUSTRALIA do i need say more? HU: some crap pionee AMP: dc 9k @ 18v SUB: 4 elevation audio sqx 12" Battery: 2 neuton power 8200d burp setup for fun 152's soon to come: rebuilt soundstream xxx (2 18" OR 3 15" wall) Bunch speakers, more batts and new HU
OldsBoomer Posted December 29, 2010 Report Posted December 29, 2010 connect both positive terminals together with a wire, then do the same with the negative. now take a wire from the + on the amp to one of the + terminals on the sub and repeat for the negaitve side Suburban Coming Soon
woodzyspl Posted December 29, 2010 Author Report Posted December 29, 2010 connect both positive terminals together with a wire, then do the same with the negative. now take a wire from the + on the amp to one of the + terminals on the sub and repeat for the negaitve side so i was right dunno what that shop did but thank you hopefully get this box in lunchtime wire up and ready for my first ever comp in 16 days.. AUSTRALIA do i need say more? HU: some crap pionee AMP: dc 9k @ 18v SUB: 4 elevation audio sqx 12" Battery: 2 neuton power 8200d burp setup for fun 152's soon to come: rebuilt soundstream xxx (2 18" OR 3 15" wall) Bunch speakers, more batts and new HU
Guest Posted December 29, 2010 Report Posted December 29, 2010 lol wtf 3 wires? that shop is retarded.
EclipseChris Posted December 29, 2010 Report Posted December 29, 2010 Shops do a lot of stupid things, and never explain why. i resolve to be a nicer moderator. Tercel build R.I.P. Eclipse build Old New V-Dub My feedback.
crispy_chick3n Posted December 29, 2010 Report Posted December 29, 2010 Lol. The only thing I can think of is if they wired in series and they just ran the pos/neg wire connection out of the box This page is crispy_chick3n approved. © crispy_chick3n inc
Recommended Posts
Archived
This topic is now archived and is closed to further replies.