Jump to content

How To Properly Fuse Amps and Rear Batteries


Did it Help  

34 members have voted

  1. 1. Did this Guide Help You?

    • Yes - Thanks :D
    • No - Still Confused :( (Post Why So I Can Help)
    • Didn't Need the Help (Already Know How)
    • I am stupid! Why am I here?


Recommended Posts

I used one of these STINGER-SCB50-CIRCUIT-BREAKER.jpg an then one of these AUTOLEADS-G2-24.jpg before the amps, does this sound good???

is that a battery isolator? if so get rid of it, it will drop your volts like your **** in the sight of a chick with hariy pits

aww no, the guy giving advice about wiring doesn't know what a circuit breaker is... <_<

although I still wouldn't be using a circuit breaker! I really don't like them for high powered systems.

Link to comment
Share on other sites

I used one of these STINGER-SCB50-CIRCUIT-BREAKER.jpg an then one of these AUTOLEADS-G2-24.jpg before the amps, does this sound good???

is that a battery isolator? if so get rid of it, it will drop your volts like your **** in the sight of a chick with hariy pits

aww no, the guy giving advice about wiring doesn't know what a circuit breaker is... <_<

although I still wouldn't be using a circuit breaker! I really don't like them for high powered systems.

dude, I asked what it was cause the fucking pic was so small..... I know what a circuit breaker is, I don't use them, you always come off as a big fucking ass hole, sorry, its just the truth...

2006 Mazda3 Hatchback Black 5 Spd Manual
Pioneer 4300DVD
2 Sundown SA-12 (34hz Tune, 3.22 cubes, 14.5 inches per cube, Triple Baffle)
Kicker 10ZX2500.1 (2845 RMS) Sub Amp
Kicker 11ZX650.4 (705 RMS) Mid Amp -- (3 Amps)
Kicker KQ3 Active Crossover
Kicker KQ30 Equalizer
Kicker 09QS60.2 Components (Woven Carbon Cones)
Kicker 09QS65.2 Components (Woven Carbon Cones) - (3 Sets)
2/0 Gauge Electron Beam Technologies (3 Runs, 2 +, 1 -)

1/0 Gauge KNU Kollasal Flex (1 Run for -)

300 Ft Kicker X-Series 16 Gauge Speaker Wire
XS Power D3400 (Rear)
XS Power D3100 (Front)
Singer Externally Regulated Alternator (Being Built)

+ The Love for Car Audio and BASS <3

UBL Build Log <------- Click Here-------> Normal Build Log (For Comments)

Link to comment
Share on other sites

dude, I asked what it was cause the fucking pic was so small..... I know what a circuit breaker is, I don't use them, you always come off as a big fucking ass hole

my mistake.

the guy giving advice about wiring can't see properly.

thats better I guess..... the guy making comments to me has a dick up his ass I guess

2006 Mazda3 Hatchback Black 5 Spd Manual
Pioneer 4300DVD
2 Sundown SA-12 (34hz Tune, 3.22 cubes, 14.5 inches per cube, Triple Baffle)
Kicker 10ZX2500.1 (2845 RMS) Sub Amp
Kicker 11ZX650.4 (705 RMS) Mid Amp -- (3 Amps)
Kicker KQ3 Active Crossover
Kicker KQ30 Equalizer
Kicker 09QS60.2 Components (Woven Carbon Cones)
Kicker 09QS65.2 Components (Woven Carbon Cones) - (3 Sets)
2/0 Gauge Electron Beam Technologies (3 Runs, 2 +, 1 -)

1/0 Gauge KNU Kollasal Flex (1 Run for -)

300 Ft Kicker X-Series 16 Gauge Speaker Wire
XS Power D3400 (Rear)
XS Power D3100 (Front)
Singer Externally Regulated Alternator (Being Built)

+ The Love for Car Audio and BASS <3

UBL Build Log <------- Click Here-------> Normal Build Log (For Comments)

Link to comment
Share on other sites

dude, I asked what it was cause the fucking pic was so small..... I know what a circuit breaker is, I don't use them, you always come off as a big fucking ass hole

my mistake.

the guy giving advice about wiring can't see properly.

thats better I guess..... the guy making comments to me has a dick up his ass I guess

my mistake.

the guy giving advice about wiring is immature.

Link to comment
Share on other sites

dude, I asked what it was cause the fucking pic was so small..... I know what a circuit breaker is, I don't use them, you always come off as a big fucking ass hole

my mistake.

the guy giving advice about wiring can't see properly.

thats better I guess..... the guy making comments to me has a dick up his ass I guess

my mistake.

the guy giving advice about wiring is immature.

done with you....

2006 Mazda3 Hatchback Black 5 Spd Manual
Pioneer 4300DVD
2 Sundown SA-12 (34hz Tune, 3.22 cubes, 14.5 inches per cube, Triple Baffle)
Kicker 10ZX2500.1 (2845 RMS) Sub Amp
Kicker 11ZX650.4 (705 RMS) Mid Amp -- (3 Amps)
Kicker KQ3 Active Crossover
Kicker KQ30 Equalizer
Kicker 09QS60.2 Components (Woven Carbon Cones)
Kicker 09QS65.2 Components (Woven Carbon Cones) - (3 Sets)
2/0 Gauge Electron Beam Technologies (3 Runs, 2 +, 1 -)

1/0 Gauge KNU Kollasal Flex (1 Run for -)

300 Ft Kicker X-Series 16 Gauge Speaker Wire
XS Power D3400 (Rear)
XS Power D3100 (Front)
Singer Externally Regulated Alternator (Being Built)

+ The Love for Car Audio and BASS <3

UBL Build Log <------- Click Here-------> Normal Build Log (For Comments)

Link to comment
Share on other sites

circuit breakers are fantastic....until you trip them a few times...then they tend to handle less and less current until finally the won't stay locked in the on position. Get a GOOD one and expect to replace it in a year. I prefer those over a fuse though.

Principal

JTech Consulting - Leader in 12-Volt Training and Product PlanningIt's not about how much power you have, but how well you use it

Link to comment
Share on other sites

Are the Rockford's c.b.'s any good?

They recommend a 140 Amp fuse for the 1000's, I can't find them and run a 125 AMP ANL inline fuse.

I am trying to get rid of them but it still will be a nice little addition for the sale.

Pontiac Grand Prix GT
400a Mean Machine alt.

EIGHT DD 12''s on a DDz2
DD vo 8''s,6''s,5.25''s&tweets
Norfolk, VA
http://www.youtube.c...ser/ovnorfolkva
https://www.facebook.com/groups/TheSPLSpot/473815915987218/?notif_t=group_activity#!/chrishova
http://www.stevemead...__fromsearch__1[/color]

Link to comment
Share on other sites

running 2 70A fuses in parallel will be the same as one 140A fuse...it's always better to underfuse than to over fuse, but a single 125A ANL that doesn't blow means you aren't getting enough current to your amp. so your charging system might be lacking, or you're underwired, or a bad ground...either way you have an issue

Principal

JTech Consulting - Leader in 12-Volt Training and Product PlanningIt's not about how much power you have, but how well you use it

Link to comment
Share on other sites

running 2 70A fuses in parallel will be the same as one 140A fuse...it's always better to underfuse than to over fuse, but a single 125A ANL that doesn't blow means you aren't getting enough current to your amp. so your charging system might be lacking, or you're underwired, or a bad ground...either way you have an issue

could be too that he isnt pushing as much power as he thinks, maybe he has yet to unlock the full potential :D plus a lot of fuses wont blow for a good time above there rated power, depends on the fuse I guess :D

2006 Mazda3 Hatchback Black 5 Spd Manual
Pioneer 4300DVD
2 Sundown SA-12 (34hz Tune, 3.22 cubes, 14.5 inches per cube, Triple Baffle)
Kicker 10ZX2500.1 (2845 RMS) Sub Amp
Kicker 11ZX650.4 (705 RMS) Mid Amp -- (3 Amps)
Kicker KQ3 Active Crossover
Kicker KQ30 Equalizer
Kicker 09QS60.2 Components (Woven Carbon Cones)
Kicker 09QS65.2 Components (Woven Carbon Cones) - (3 Sets)
2/0 Gauge Electron Beam Technologies (3 Runs, 2 +, 1 -)

1/0 Gauge KNU Kollasal Flex (1 Run for -)

300 Ft Kicker X-Series 16 Gauge Speaker Wire
XS Power D3400 (Rear)
XS Power D3100 (Front)
Singer Externally Regulated Alternator (Being Built)

+ The Love for Car Audio and BASS <3

UBL Build Log <------- Click Here-------> Normal Build Log (For Comments)

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   2 Members, 0 Anonymous, 1794 Guests (See full list)

×
×
  • Create New...