Mr DeeBeez Posted May 30, 2015 Report Share Posted May 30, 2015 a friend of mine recently blew his Belva Bb5000d. He got a new amp so it was just just sitting around and he gave it to me to see if I could fix it, just to see if I could. Would it be worth trying to fix. Never tried to fix an amp, but wouldn't mind giving it a go. If it doesn't work, I'm not gonna mind. All the caps seem to be good, it's just around the edge of the board where there are visible heat marks. I'll post pics so you can see. But would it even be worth trying? EDIT: the parts that are burned up have this on them: cet cep75n06. I can't seem to find them anywhere. Know what else I could use? Or where to find these? Fi Team 18's (4) Crossfire 16k Crossfire 400.4 & 800.4 Pioneer AVH-X491bhs 140ah cmax CES 320's (2) Link to comment Share on other sites More sharing options...
Mr DeeBeez Posted May 31, 2015 Author Report Share Posted May 31, 2015 Where can I buy mosfet's? There were like 4 or 5 that were blown on the amp and want to see if putting new ones in will work. It says "cet cep75n06 47j1z" is that a common one? And do you think changing the blown ones will fix it? Fi Team 18's (4) Crossfire 16k Crossfire 400.4 & 800.4 Pioneer AVH-X491bhs 140ah cmax CES 320's (2) Link to comment Share on other sites More sharing options...
RooTxBeeR Posted May 31, 2015 Report Share Posted May 31, 2015 I can't be 100% sure, but I am sure it is more than just what is visually being able to seen on the board that is broken or burnt. Check to see how much it would cost to send in to some places. Can't be too much money. On 11/20/2012 at 8:54 PM, AMI CUSTOMS said: Turned mine up today at a light, guy next to me his steering wheel started moving and he looked over at me like I was a magician lol. On 5/9/2012 at 8:45 PM, skittlesRgood said: fuck the plating. look at what the main metal used is. you could buy unicorn blood plated terminals but if its just covering up dog shit, whats the point On 4/10/2013 at 12:26 PM, mrd6 said: I'll admit, half way through sanding that fiberglass in the rain and cold while I was all itchy I was definitely starting to question why i was doing this haha Soon To Be '04 Ford Escape US Alternator 280A Hairpin D4800 Under the Hood (6) XP3000's in Rear 1/0 SHCA & XS Power 4 runs to back TORK2 kit from Tony @ CE Auto Supply Pioneer DEH-80PRS DD AW6.5 (2) per door *Tweeter Unkown* DD SS4a & C3d (2) SCV4000 @ .5Ohm (2) 15" Sundown Zv5 Link to comment Share on other sites More sharing options...
Mr DeeBeez Posted May 31, 2015 Author Report Share Posted May 31, 2015 I don't know where I'd even ask to send it in. I'm not too concerned with the amp, got it for free from a friend. Thought it would be kinda cool if I could try to get it to work. What else could it be? I know when it blew, it was because he had it turned up, and the flipped the switch to turn the amp on and I'm pretty sure the sudden burst of electricity is what blew it. Fi Team 18's (4) Crossfire 16k Crossfire 400.4 & 800.4 Pioneer AVH-X491bhs 140ah cmax CES 320's (2) Link to comment Share on other sites More sharing options...
RooTxBeeR Posted May 31, 2015 Report Share Posted May 31, 2015 I don't know where I'd even ask to send it in. I'm not too concerned with the amp, got it for free from a friend. Thought it would be kinda cool if I could try to get it to work. What else could it be? I know when it blew, it was because he had it turned up, and the flipped the switch to turn the amp on and I'm pretty sure the sudden burst of electricity is what blew it. Hey, free blown amp is a free blown amp. I have a 300watt mono amp that I bought used which turned out to be blown. The guy I bought it from refunded me the money so it was free. Now it just sits until I get the money to send it in. I don't remember the name of the place, but they said if I ship it in, it would cost 85$ for them to fix and ship it back. Just keep this post active and someone should eventually chime in with some worthy companies to go for with this type of work. I tried to fix an amp before myself, didn't work. Replaced the resistors that burnt out and once I went full power other parts fried. On 11/20/2012 at 8:54 PM, AMI CUSTOMS said: Turned mine up today at a light, guy next to me his steering wheel started moving and he looked over at me like I was a magician lol. On 5/9/2012 at 8:45 PM, skittlesRgood said: fuck the plating. look at what the main metal used is. you could buy unicorn blood plated terminals but if its just covering up dog shit, whats the point On 4/10/2013 at 12:26 PM, mrd6 said: I'll admit, half way through sanding that fiberglass in the rain and cold while I was all itchy I was definitely starting to question why i was doing this haha Soon To Be '04 Ford Escape US Alternator 280A Hairpin D4800 Under the Hood (6) XP3000's in Rear 1/0 SHCA & XS Power 4 runs to back TORK2 kit from Tony @ CE Auto Supply Pioneer DEH-80PRS DD AW6.5 (2) per door *Tweeter Unkown* DD SS4a & C3d (2) SCV4000 @ .5Ohm (2) 15" Sundown Zv5 Link to comment Share on other sites More sharing options...
Mr DeeBeez Posted May 31, 2015 Author Report Share Posted May 31, 2015 damn that sucks. I dont know if its worth paying to fix tho. i have no need for it, so id just sell it and dont think i could get more than 150 for it TOPS Fi Team 18's (4) Crossfire 16k Crossfire 400.4 & 800.4 Pioneer AVH-X491bhs 140ah cmax CES 320's (2) Link to comment Share on other sites More sharing options...
n8ball2013 Posted May 31, 2015 Report Share Posted May 31, 2015 I'm not one to go all girly over the layout of a board or how it looks but dear god thst thing looks like shit. Literslly THERE IS NO BUILD LOG! 1998 Chevy Silverado ext cab Alpine CDA-9887 4 Team Fi 15s 2 Ampere Audio TFE 8.0 2 Ampere Audio 150.4 3 Digital Designs CS6.5 component sets Dual Mechman 370XP Elite alternators inbound! 8 XS Power d3400 6 XS power d680 Second Skin Stinger Tsunami Wiring Sky High A Real Voltmeter not a piece of shit stinger. Link to comment Share on other sites More sharing options...
Azagtoth502 Posted May 31, 2015 Report Share Posted May 31, 2015 ......to answer your question..... Try to find the part # http://www.mouser.com/ http://www.digikey.com/en/resources/home pa-pa-platypus sorry not everybody has a companies nuts so far down their throat they catch every drop ball sweat when it falls Link to comment Share on other sites More sharing options...
Mr DeeBeez Posted May 31, 2015 Author Report Share Posted May 31, 2015 I'm not one to go all girly over the layout of a board or how it looks but dear god thst thing looks like shit. Literslly lol, well its a good thing i didnt buy it Fi Team 18's (4) Crossfire 16k Crossfire 400.4 & 800.4 Pioneer AVH-X491bhs 140ah cmax CES 320's (2) Link to comment Share on other sites More sharing options...
Mr DeeBeez Posted May 31, 2015 Author Report Share Posted May 31, 2015 ......to answer your question..... Try to find the part # http://www.mouser.com/ http://www.digikey.com/en/resources/home cant seem to find it anywhere :/ thank you for the links tho! Fi Team 18's (4) Crossfire 16k Crossfire 400.4 & 800.4 Pioneer AVH-X491bhs 140ah cmax CES 320's (2) Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.