liljestrand

Well i figured out the problem. The neg cable inside the disconnect wasnt seated properly. So if you ever run into this problem check to make sure those pins are sitting correctly

so ive tried the charger on a single batt (d3400) and a bank of 3 d3100s. Whenever I turn it on it just sits at the screen that shows .6v stby. No matter what ive done checking the wires nothing has worked so far. I used sky high 8g for the power wires. I have the controller, temp wire and power/ground all hooked up as far as i know correctly. And it just shows .6v stby noatter what

How is this confusing? I originally mentioned that I got 4 alts with regular plugs on them (hence why i was asking which wires needed to be hooked up) Mechman mentioned that usually when they build alts for a multi alt setup they make 1 normal and make the others self exciting. I mentioned I didnt know that was an option and that I had ordered the alts through the SSA store and that the way i destribed was the way they showed up.

Honestly I didnt know this was an option. I just ordered 4 alts through SSA and this is how they came lol.

I wanted to try it out but sadly i only got a ps4. Could try it on pc but I dont usually have friends playing on pc so it gets boring fast. There were quite a few zombie survival games coming out and this looked like one of the more promising ones.

I would just like to add that i called mechman this morning and nathan returned my call asap and helped me out greatly. Way simpler than i had it going in my head

I emailed them through their page a few days ago, about a possible wiring harness. But heard nothing back.

So I have a 04 tahoe and I will be installing 4 mechman elite 370's. Now the plugs that came with the alts I understand that one of the alts will plug into the stock plug. So for the other 3 alts is there a certain wire i need to hook up? Do I need to splice all the same colored wires together? The plugs currently have 4 wires (yellow, blue, red, black) with a pigtail blue wire to hook up to a ignition source. Any help would be greatly appreciated. Thanks.

Ok thanks that's what I figured. Was just hoping for the added bonus.

The screen that's included. Can you have that on anytime you want (like a battery monitor type thing ) or is the screen only on while plugged in and charging. Tia

Piece of scotch tape and a white piece of paper does the trick

Did you recondition or just charge? 12.75 is normal afaik but sometimes you can "train" a battery to sit a little higher. Usually around 13.1 ish.

This is why I only play hardcore kill confirmed. I got too tired of hitting people 3-4 times and have them shoot me once and they get the kill. went from going 20-18 on regular to 40-10 on hardcore. Lot less bullshit to deal with.

Sadly thats how many americans are today. Anytime they feel they can sue someone for an easy buck they do. Just like the idiots that didnt realize coffee was hot and sued mcdonalds when they spilled it on themselves.

No the voltage is read from the power wire for the head unit itself. I guess you could run a wire to your batts for the primary power wire of the head unit. But mine only reads .1 above what my stinger reads from my batt bank. So its pretty damn close if you got decent electrical.