liljestrand

Well i figured out the problem. The neg cable inside the disconnect wasnt seated properly. So if you ever run into this problem check to make sure those pins are sitting correctly

so ive tried the charger on a single batt (d3400) and a bank of 3 d3100s. Whenever I turn it on it just sits at the screen that shows .6v stby. No matter what ive done checking the wires nothing has worked so far. I used sky high 8g for the power wires. I have the controller, temp wire and power/ground all hooked up as far as i know correctly. And it just shows .6v stby noatter what

I wanted to try it out but sadly i only got a ps4. Could try it on pc but I dont usually have friends playing on pc so it gets boring fast. There were quite a few zombie survival games coming out and this looked like one of the more promising ones.

Ok thanks that's what I figured. Was just hoping for the added bonus.

The screen that's included. Can you have that on anytime you want (like a battery monitor type thing ) or is the screen only on while plugged in and charging. Tia

Piece of scotch tape and a white piece of paper does the trick

Did you recondition or just charge? 12.75 is normal afaik but sometimes you can "train" a battery to sit a little higher. Usually around 13.1 ish.

http://www.ebay.com/itm/Solder-Pellet-Solder-Slug-for-2-0-Awg-wire-Orang-2Pack-/370335751832?pt=LH_DefaultDomain_0&hash=item5639bb1e98 I've used these before. Not that exact one but one like it. I'm sure if you look around you can find it cheaper. Just put the pellet in, heat up the lug and when it becomes liquid you drop your wire in.

This is why I only play hardcore kill confirmed. I got too tired of hitting people 3-4 times and have them shoot me once and they get the kill. went from going 20-18 on regular to 40-10 on hardcore. Lot less bullshit to deal with.

Sadly thats how many americans are today. Anytime they feel they can sue someone for an easy buck they do. Just like the idiots that didnt realize coffee was hot and sued mcdonalds when they spilled it on themselves.

No the voltage is read from the power wire for the head unit itself. I guess you could run a wire to your batts for the primary power wire of the head unit. But mine only reads .1 above what my stinger reads from my batt bank. So its pretty damn close if you got decent electrical.

Its www.b2audio.com they are updating it atm

I was like....is there a new geoff in this game?

IMG: I don't have the tools for a proper clamp test but some of the guys on team nwspl do so ill try to get some soon.

Yes its made by b2 aka better bass. They are fairly new to the us market. High quality stuff here. Kyle I don't know the 4ohm rating but I can ask jay later tonight.

It does 5k@12volts, 7.1k@14volts, and 8k@15volts under 1%thd. If you've seen a crescendo bc5500 this thing is 2" longer and wider and weighs roughly 10lbs more.

Most use the -5 track because most music will be -3 to -7. So its usually a safe spot.

You guys don't seem to read very well. He's running a 4 way set up. Which means most likely he has sub-midbass-midrange-tweeter. Really don't know why that was so hard to comprehend. Op I'd just set it at the 1k and if they scream at you turn it down to a level you like.

The amp is going to see whatever load you have it wired to. I have my bc5500 's strapped at 1 ohm. Just make sure you got the electrical for it

Ok thanks. Was just checking cus I could have sworn someone said you had to check the second amp also.

Well I know you dont use the ground on the dd1 on the speaker terminals. But someone mentioned checking the second amp also so basiaclly do I put the red probe in the + or - of the second amp since they are strapped. And would I leave the jumpw wire in the amp also.

I did a search and none of the threads with these keywords helped so. I have 2 bc5500's strapped atm. One of the threads said I should check both amps with the dd1. On the amps when you strap you do + speaker to + of one amp and - speaker to + of second amp. Then jump the -'s of both amps together. So when I check the second amp do I connect the dd1 to the - of the second amp since technically its the + or do I connect to the + of the second amp just like I would the first amp. If that all makes sense. thanks for the help in advance.

ghost driving? Real men ghost ride their whip. Ok not reallly. All that shit is stupid and only leads to people getting hurt.

Did they even caulk that thing at all?

My red nose pit Corso. Got him from an animal shelter. Wonderful dog and great with kids. This was him attempting to help my mom and I paint her bathroom.