Jump to content

Recommended Posts

Posted

This is what I had planed on making my car look like after a little bit of custom molding and a paint job. The pic has my winter rims... I made a vector to kinda get a good idea of what it would look like when it was finished.. also it was helpful for the body shop.

Stock:

Posted Image

Vector:

Posted Image

This is the most recent pic of my car that i have of befor it was in the body shop ....

Posted Image

Its already a lot different looking... this is what it used to look like when i first got it.

Posted Image

I decided not to put on the fender flares. Window tint and dual ehaust was put on after these pic where taken. So...... here it is now since I got it back from the body shop woot!!!! It's not 100% finished I sill need to reapply my trunk spoiler lip kit, retrofitted HID/Projector headlights Anyways... what do you think? Not bad for a Taurus eh? Anyways, Ill let the picture speak for itself!!

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image

Ah yes the sucide doors.. I wanted to add something a bit different it was either this ot make it in to a 2 door lol..

Posted Image

Posted Image

This is how the exhaust turned out. From what Im told my EVAP is in the way of where you would mount the 2nd muffler. SOooooo I mounted it where the stock resonator was right behind the 2nd cat. It a single flowmaster super 40 with 2 oval vibrant tips with a bit of custom pipes.

Posted Image

Posted Image

Posted Image

Here is a shots of the pipes (I got some high heat Rustoleum and sprayed every thing while I was down there.) Oh btw the only thing I had to do was cut a piece of the splash guard on the passenger side to get the clearance I needed.

Posted Image

And here is a sound clip. My Camera blows at recording audio I had to set the camera back and it still distorts.

Posted Image

I don't have any pics of the inside atm but I get some up later on..Anyways sorry to kill u with all the pics lol but what do you think of er?

* Eclipse CD3200 with PAC SWI-CAN2 and SW-ECL2 Steering Wheel Controls Interface
* Pioneer D-Series Mids and Highs ( Fronts: TS-D1702C; Rears; TS-D1702R and Dash; TS-D1002R )
* Rockford Fosgate PBR300X4 ( Mids and Highs Amp )
* DC 3.5k with Dual Inputs; Custom Plexiglass Backing ( Sub Amp )
* Rockford Fosgate Balanced Line Driver

* One FULLY LOADED ~ 10" DC m2 XL
* Custom Built Carpeted Ported Box Tuned to 32hz. Single Chamber With Volume of 1.44618³ ft ; 1.13216³ ft After Displacement
* Custom Built Carpeted Trunk Wall with Added Fans for Amplifier Cooling
* MechMan 240a High Output Alternator

* KnuKonceptz Krystal Kable RCA Cables
* Upgraded Electrical With 1/0 KnuKonceptz Kolossus Fleks Kable and 1/0 Sky High Car Audio Cable
* Five Exide Orbital ORB34M Marine 12 Volt Batteries
* PowerMaster XS D3100 12 Volt Battery

My 2008 Chrysler 300 Limited - SuperCharged 3.5L V6 - UBL

My Old 2005 Ford Taurus - CarDomain - Vehicle Was Sold

Posted

Nice I like the car it looks good. You got a system in their?

2 Infinity Reference 1252w 12s

4.2 cubic foot box tuned to 28hz

Sub amp: 1 Profile AP1200

Speaker amp: 1 Sony Xplod XM-504z

Kenwood eXcelon KDC-X492

4 and 8 Gauge Knu

Big III In 1/0

All in my 90 Accord

f05112e8-c6ca-4f78-9a8d-47be99303c8b_zps

Diamonds are forever, but 9's end that shit fast....

Posted

Nice I like the car it looks good. You got a system in their?

ah yeah, forgot to add that info but no pics atm...

2008 Kicker Solo Barics L7 12" x 2 subwoofer system, 200^ FatMat Xtreme Car Sound Deadener , 210+ High Output Alternator, Red top Battery, Big 3 Upgrade, Eclipse CD5000 In-dash Headunit, Kicker 07 SS56.2 SS-Series 5 ¼" components, Kicker DS693 6x9, Kicker KX350.4 4-Channel Amp, Mach Audio Pods with Kicker SS-Series Tweeters, Rockford Fosgate T10001bd Mono Amp. front and rear speakers blew out a couple days ago and they're being replaced by 2 sets of RF P162S 6.5" Components for fronts/rears powered by a RF T400-4.

Dude.. I really like the way that looks!! Just needs to be lowered a little bit. Everything else is Very Nice!

Yeah I wanna bag it eventually.. btw them rims are 20's.

* Eclipse CD3200 with PAC SWI-CAN2 and SW-ECL2 Steering Wheel Controls Interface
* Pioneer D-Series Mids and Highs ( Fronts: TS-D1702C; Rears; TS-D1702R and Dash; TS-D1002R )
* Rockford Fosgate PBR300X4 ( Mids and Highs Amp )
* DC 3.5k with Dual Inputs; Custom Plexiglass Backing ( Sub Amp )
* Rockford Fosgate Balanced Line Driver

* One FULLY LOADED ~ 10" DC m2 XL
* Custom Built Carpeted Ported Box Tuned to 32hz. Single Chamber With Volume of 1.44618³ ft ; 1.13216³ ft After Displacement
* Custom Built Carpeted Trunk Wall with Added Fans for Amplifier Cooling
* MechMan 240a High Output Alternator

* KnuKonceptz Krystal Kable RCA Cables
* Upgraded Electrical With 1/0 KnuKonceptz Kolossus Fleks Kable and 1/0 Sky High Car Audio Cable
* Five Exide Orbital ORB34M Marine 12 Volt Batteries
* PowerMaster XS D3100 12 Volt Battery

My 2008 Chrysler 300 Limited - SuperCharged 3.5L V6 - UBL

My Old 2005 Ford Taurus - CarDomain - Vehicle Was Sold

Posted

Texas representing motha ..... anyways nice car man i like it and who says you can't make a taurus look hot

2-DC 15XLM2 D.7s

1-DC 5K amp

(1) XS Power D6500(UNDERHOOD) and (1) XS3000(REAR)

3 runs 1/0ga for power and 2 runs of 1/0ga for negative.

(2)-RFT165s components, ...... 4 separate 1 inch tweetersRF T600-2(fronts) Punch 450.4(rear)

Audiocontrol 3.1.

DC power 260amp alternator w/MLA Module

Posted

Very good man, It looks like you only need 1 or maybe 1.5 on the drop..... Very nice Job..

2007 Great Wall So Cool

4-12' RE audio MX's

Stetsom 7k2D

6-Batts

3-Mechman 250 amp Rhino's

Posted

the ass end is the money shot!

how much did the paint run ya?

Hmm Im not quite sure I paid like $2600 for all the work.. it included:

3rd brake light on trunk, shaved handles, hood scoop, body kit, smoothed out accent marks in the bumpers, smoothed out the doors and black paint with a bit of gold pearl in it.

Very good man, It looks like you only need 1 or maybe 1.5 on the drop..... Very nice Job..

I wanna bag it, its pretty low as it is. The rear strut is lifted up a bit because when I used to hit bumps my 20's would rub on the wheel well. Plus the 200ish pounds of audio equipment doesn't help that either lol

* Eclipse CD3200 with PAC SWI-CAN2 and SW-ECL2 Steering Wheel Controls Interface
* Pioneer D-Series Mids and Highs ( Fronts: TS-D1702C; Rears; TS-D1702R and Dash; TS-D1002R )
* Rockford Fosgate PBR300X4 ( Mids and Highs Amp )
* DC 3.5k with Dual Inputs; Custom Plexiglass Backing ( Sub Amp )
* Rockford Fosgate Balanced Line Driver

* One FULLY LOADED ~ 10" DC m2 XL
* Custom Built Carpeted Ported Box Tuned to 32hz. Single Chamber With Volume of 1.44618³ ft ; 1.13216³ ft After Displacement
* Custom Built Carpeted Trunk Wall with Added Fans for Amplifier Cooling
* MechMan 240a High Output Alternator

* KnuKonceptz Krystal Kable RCA Cables
* Upgraded Electrical With 1/0 KnuKonceptz Kolossus Fleks Kable and 1/0 Sky High Car Audio Cable
* Five Exide Orbital ORB34M Marine 12 Volt Batteries
* PowerMaster XS D3100 12 Volt Battery

My 2008 Chrysler 300 Limited - SuperCharged 3.5L V6 - UBL

My Old 2005 Ford Taurus - CarDomain - Vehicle Was Sold

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 702 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...