Jump to content

darrenk

Members
 View Profile  See their activity

  • Posts

    101

  • Joined

  • Last visited

 Content Type 

Everything posted by darrenk

  1. darrenk
    there is 50.5" between the wheel wells my box is 49" wide and i used some 3/4" scrap pieces to keep it from shifting from side to side. The MLA works great use to drop voltage to 10v before it and now it doesnt drop below 12v. PM me if your needing a T20001 i'll be upgrading soon.
  2. darrenk
    i believe mine is 11 1/2 inches tall. went from as low as i could go in the bed up to the seam below the upper brace. my vent piece opening is 11" and I have 1/4 " MDF on top and bottom with just barely any clearance
  3. darrenk
    Yo do not meet the required 150 posts to sell here. :
  4. darrenk
    I wanna see the 15's
  5. darrenk
    I build my by using 12-15 sq in per cu ft and was told 25" long for 40hz or 30" for 35hz. Maybe someone else will chime in with an exact length. Looking at 165sq in of port
  6. darrenk
    X2 VHT Niteshades, I had to order mine online since it was not offered locally and if you research it there are plenty of how to articles on it.
  7. darrenk
    here it is from the back side
  8. darrenk
    I made it to where the port comes into the cab, as far as changing the size I can always push the back wall out further
  9. darrenk
    that will work I have it on sketch up now but cant figure out how to save it as a pic or I would post it up
  10. darrenk
    I can make adjustments as I haven't built it yet so I can make it a deeper box, just wondering how much longer.
  11. darrenk
    how much longer to be tuned to 30hz?
  12. darrenk
    Perfect, I took a guess on the length. Thanks
  13. darrenk
    anyone wanna tell me what a 8 cu ft box with 121.5 sq in of port 24.25" long would be tuned to. Plan on using 2 -RE SX 15's instead of my P3's now that I blew one of them.
  14. darrenk
    If someone has these I would love to try them. PM plz
  15. darrenk
    so how does it sound? I have a blow through in mine and looking to open it up more so I can get more air moving. I will be changing up the box cuz like Chode mentioned it is tuned way low mine peaks around 28 hz - 32 hz. Just my .02 but I would open up the back wall more.
  16. darrenk
    You never cease to amaze me Steve. Awesome work as always. How much longer you think before you can call it done?
  17. darrenk
    Solution = build a panel saw to rip 4x8 sheets. King suv had a link on some plans in his new shop thread that I ordered.
  18. darrenk
    Open it up so we can see what's its made of.
  19. darrenk
    Where in Texas you located could use a 2400
  20. darrenk
    which 15's did you get? Keep us posted and upload some pics....
  21. darrenk
    where did you buy your HID's from?
×
×
  • Create New...