sayhuh?

I can fit 3 6" ports fairly easily. Maybe even 4, but that drops me slightly below the 2.2 needed per sub. Those dimension are spot on. I'm gonna mess with some PVC in the current baffle, and then decide rather or not to slot port it, if possible or go sealed again. Shit or go 2 18s instead. lol Of course, I won't be able to get to this until Friday..boo I very well may try the slot on the one side. I plan on trying a few things before I become set in stone for the baffle.

Thanks guys! I'm going to use this same front, but get some 6" pvc and cut the current holes to fit to do some testing. Luckily for me, the one thing I have done yet is glue the front board on. I figured I would do something wrong, and the worse thing to do is remove wood that is glued. I thought ahead thinking something wouldn't be right and it would let me test different configs. I figure if I can mess around with this, and then get it sounding right, then I'll make it perma.

200? Yea, the only way to do that is not to try lol. What about slot? I can slot port much easier with just redoing the front wall. I need at least 2.2 per sub. Again, much appreciated. I knew something wasn't right. If all else fails, I'll go back to sealed.

Then what am I missing on that Calc? Thanks.

Voltage stays around 13.5- 13.8. Electrical is is missing maybe another battery, but I have a DC Power 320 amp alt, three runs of 1/0 and two batts. EDIT: Keep in mind, this is only at 2 ohms. Here is the Torres calc and specs I used. I think I know the problem, but I have to wait. Had one of the 15s glue on the spider seperate. Skar sent me a recone, but it being my first time doing one, may have been the problem. After I took it out and tried three subs, it was ok lol. I'll get a vid up later (maybe tomorrow) showing a lil something, but not much since I'm short a sub for a while. If my ports are an issue LMK. Thanks!

Here is a FaceBook link for the event! Will be a great time. http://www.facebook....STNGAINEVILLEFL Yea I saw it there. Damn that is close to being here. Hmm. Well, the wall will be done and I should have my sub back by then (or I could just pick it up lol). Sigh...I'll let you know Sure the wife would love it, but what to do with the kids.

When is slamfest? I'm done for a trip. Ohh NVM, that is right around the corner. That will be tough for me!

2 channel FTW. =) Been waiting on this.

Is it done yet? Sheesh people, as the guy has said 1000 times over, he appreciates the input, but he's got this. 6 pages and 80% of what you should do's.. /rant

Got it playing..Kevin, I'll be sending you and email. Some playing issues I gotta finger out. Seemed 'louder' sealed. Booo... After I readjust the amps per DD1, I'll see if I am happier.

Back is about half way done. More trim pieces and clean up needed. Crappy Iphone pic.

I bet it will be weak...

This bass knob is better IMO http://www.amazon.com/PAC-Remote-Amplifier-Level-Controller/dp/B0002J226O No offense to SKar of course. I have grown to dislike those bass knobs.

His English sucks. I dont twitter or I'd help, but yea, telling Obama he is fired under someone elses name is beyond wrong, even if true. =)

http://www.stevemead...se/page__st__60 Started to rebuild, again. lol Said f the back seats. =) Oh and James, I bought a different deck, and now the it clips at two total different numbers. Sub at 23 and highs at 47... poo. Here's what I got so far: Need to fix that 2x4 on the right there. I think it has a slight curve in it. Pooped though. Should be a little better when it is done...I hope. Box is 9.6 and will be tuned at 33.04hz with (3) 4" aero ports. Now back to Sears to get a new Router...mine broke =(

I'll take pics of the rebuild of the rebuild...fuck the backseat =) 6 15s in a 2 door golf, inbound lol

In b4 45s are overrated.

FTW!!! LoL.

10s, but yea. Here you go http://www.stevemeadedesigns.com/board/topic/140915-demolition-of-skar-audio-vvx-10s/page__p__1990670__hl__recone__fromsearch__1#entry1990670

Someone on here did recones for 12s. It was with upgrades, I believe. Search in skar section for recones.

Title sums it up. Kevin, not only loving the products, but the CS as well. Seriously, sometimes, great CS is worth buying a product alone. (sometimes, I said) You email them, response is quick and precise....and sometimes at hours you wouldn't expect a reply lol You have a problem with the product, they will make it right. (product issue and not abuse of the owner of course). They stand by their warranty and product, that is for sure! Thx!

Reminds me of an younger Em, but black..well white (lol)

Remember that time I cleaned your shop for you.... Looks good man. Only if we could hear the true sound via a camera i know its not perfect but you CAN clearly hear the midbass coming off those T5's when i play that yelawolf song That you can! I love how you can go from a Tahoe, to a trunk and make them both look good and loud on different levels. Heck, even the Honda, the Chicken rides... Talent.

Remember that time I cleaned your shop for you.... Looks good man. Only if we could hear the true sound via a camera

LoL. I feel you man. I thought hmmm, my job allows me time to study, so I will get the CISSP book and study(the one by shon harris). Laughs..so I enrolled at AMU to take the actual classes. Once I'm done there, I will go to the CISSP boot camp, Then go take the exam. It is a no joke exam from what I hear. Good luck to you!