fox_racin4

Remember a high tunned BP4 will usually still play lows, therr tuned higherthena normal ported box try turning gain up a tad more the way you set it isnt the best... thats how i do it aswel and usually turn it up a few clicks past were i set it

Electrical consists of, 425a MM alt 3pos. runs 3neg. runs and to start 2 2150s charging at 15.2 amps [email protected] and 2 sax125.2

So 2 should be ok on a saz4500 425a alt

Bumppp

Whats.your guys oppinions on the oddesey 2150s?

I used to....but my truck was a daily driver so if i broke... i had to hurry and fix, started getting expensive so i stopped lol

Theres a bolt way up in the pully, once thats out it should come off, but they are usually on there real good, get a pully puller or cut it off (cutting wheel on grinder,. then cut to crank, split it open with a punch)

www.heymow.com EVERYTHING you neef, is there i used to race them, just im on my phone so it takes a while to type

A tline will be massive for 2 12s stick to ported

If thats your friends daily driver....tell him hes a retard.

Voltage stayed mid 13s clip light was going crazy subs heated up in about 30seconds Tried everything to minimize clipping... nothing seemed to help... like i said...my opinion

IMHO SD12k for DAILY not a good option.... ask boilermaker about them My experiance with an SD8k.... my aq3500.1 was louder, sounded better,

????

Didnt even think of that! thats what i will be doing. after i fix the one stripped terminal And to mrskippy.....im not wasting any money, ive got 20f of 4g colecting dust...could have used it.

Planning for mid 50s under 40hz last setup was just a normal ported box, im rebuilding.... full wall more power

Nope...that was only with 8 10s on maybe 4k, doing a 148ish.... need moar!

Already "broke" the rear window out of the frame... fixed that prblem tho.

Will have 12 SA10s on 2 saz4500s... amp about 8f from the box

Well i have it....and its a decent length to the box lol

Ok perfect! my speaker leads to box will be about 8f, worth it to use 4g wire? power will be close to 10k

i know RCAs next to power wires gives you feed back, but what about RCAs next to speaker wire comming from amp? reason being is my amps are going in the bed of my truck, and i have a 2" rubber hose to run wires threw and all my speaker wires/rcas will ne close to my speaker wires for mids/subs

that is deffinatly NOT a UFO motor!!

if its done right, it will work, if your going for numbers do some testing, my buddys blazer looses .8 with his right front dash speaker out

X2 very nice of him!

I say you bottomed it out one to many times