fox_racin4

try a diff output on the amp see if that helps or differnt wire

youll be fine with them at 1 ohm as long as you have a decent electrical system it will run at 1 ohm i was running mine at 1 ohm for a few weeks no problem didnt even get warm or go into protect once

what subs?

so that will be going under the surround between the basket?

level 3s or the level 4s in comming PM

if you wanna only run one aq 1200 get the level 3s they will take 600rms allllllll day lonog

can still get decently loud with a single 10!!

i wasnt doin to good tonight lol usually in the top 2 ive been slacking lately lol i was trying to add all the smd guys but stupid ass ps3 was being a bitch

read jackass!

not a bad price on the boox you could make a better one yourself if you have basic tools like a drill and a jig saw and circular saw or have home depot cut the wood for you

what are you using for an engine 1st of all?

blowthrew!!!! level 3 12 on about 800 rms will be pretty good in your truck

im lookin for some car audio wallpapers post them up!

high five!

if you dont have a tach... put it in there i know my 1990 k-15 didnt have one

EVERY one is louder then someone else

if your sub got real hot... cheak the coils see if they are black or not

then the sub wouldent move ( ive done it) it wouldnet have much output if i understand you correct

i think he meand + and - backwards on the amp?

if it was sparking your lead were probly hitting eachother or the coil is already burnt ( if i read your port right) i run 2 audiopipe 3000s to my 4 level 3s with no problems a level 5 should gobble up the ap3000 no problem lol

i didnt have time to beat the balls out of it it didnt last as long as i thought it would i was kind of dissapointed lol

lol ive ran a single type r 10 on 1500 rms with no problems also had another pair on 2000rms took it fine would have used more power but could only wire for 4 ohm or 1 and amp wasnt 1 ohm stable someone really needs to email all the sites that sell audiopipe and have hten fix the power ratings there as followed 2000rmsx1 @ 4 ohm ( bridged) 3000rmsx1 @2 ohm (bridged) 500x2 @ 4 ohm ( non briged) 1000X2 @2 ohm ( non bridged) 1500x2 @1 ohm ( non bridged if you have proper elctrical you may be able to run it at 1 ohm bridged some can do it some cant i know my amps can run 1 ohm bridged if i keep voltage up

spiders were still intack it was moving maybe 1/8 inch befor i could hear the noise so... i put it out of its missery!!

bump for sub killing!

vids!!!