Jump to content

THEKINGsBACK

18+ All Access!
  • Posts

    2268
  • Joined

  • Last visited

Everything posted by THEKINGsBACK

  1. looks like i need to find some some NS v2's
  2. does it matter how long the runs are if you ground to the frame? in the front i went from back of alt straight down to frame 18" total 3 runs of 0g on each side of motor. then in back i went from my batterys through the floor to frame maybe 2ft. 6 runs also i have steady voltage for pulling 800+ amps so your grounded with runs from the front to back and in the back your grounded to the frame?
  3. does it matter how long the runs are if you ground to the frame? in the front i went from back of alt straight down to frame 18" total 3 runs of 0g on each side of motor. then in back i went from my batterys through the floor to frame maybe 2ft. 6 runs also i have steady voltage for pulling 800+ amps so your grounded with runs from the front to back and in the back your grounded to the frame?
  4. does it matter how long the runs are if you ground to the frame?
  5. so no matter what you run.. you need to have equal runs of positive and ground?
  6. x2..... been lookin for some goods
  7. Yea kinda suck was looking.for.aome items
  8. check out the infinity kappa four... i absolutely love it... and it has a small i mean small footprint, about the size of a netbook
  9. ied go with sundown just bc of the fact of there thermal power handling.. never seen a a sd 2.5 take the abuse a sundown sub has. or say a dc level 3 with 4 coils increase handling about 30%
  10. 2 level 4 xls 10? Sundown z series...
  11. Single level 5 10 on 4k should do nicely.. Or a ssa xcon 10
  12. i believe with a constant 14.4 murilo said they do 7k so on 18 volt i suspect they do way more prob on round the 10 k mark ied just get the 5k and see were it took me personally but ur doin 4 levels 5 i stand corrected get @ least the 12k
  13. definition of insanity is doing something over and over and expecting a different result.. but in this case it could work just make sure you have the proper crossover freq set
  14. Of course...these amps are extremely underated, and I know people who run them on .5 ohms daily. But as for exact RMS numbers, I couldn't tell you. I know the aq2200 @ .5 ohms was puttin out around 4100watts Is this for real? I dont think thats possible not at 14 volts
  15. prob the best part of the whole damn thing.... i was rolling when he said that... wow... :rofl: :rofl: :rofl: :rofl: :rofl:
  16. doublemint twins haha lol they put out more than you do :lol: :rofl:
  17. gonna have to research... just look around an be patient... if you build it... they will hear it...
  18. think about it when u upgrade to the 3200 watts... might as well do it right the first time.. im learning that now.. cost you way more if you do it wrong the first time... THERE ARE NO SHORT CUTS IN CAR AUDIO... gotta pay to play.. that 10 amps might be the difference breaker.. consider it like insurance.. better to have it and not need it.. then need it and not have it buddy...
  19. how about this.... im planning on running 3k right now and my electrical consists of 1 mechman 270 with 2 kinetik 1800s in the rear and 1 1400 up front.. and what ohm load are you running the said 1500 watts and the upgraded 3200 watts at.... that plays a big part a well.. 1500 a .5 take more power than 1500 at 2 or 1 ohm because of how efficient an amp is..
  20. Watts/voltage/efficiency=amperage. That's a rough estimate. For music, I divide the amperage by ~.6 damn ur good
  21. Bigger is always better...... More power equal less stress on ur equpiment
  22. In all honesty I think u need at 1000 bucks... Wat ur tryin to do 3200 watts alts prob gone run u 400 at least then a few batterys and another run of zero
×
×
  • Create New...