Jump to content

will77530

Members
  • Posts

    3402
  • Joined

  • Last visited

  • Days Won

    29

Everything posted by will77530

  1. hes full of shit, you can lay a coil on its side upside down fuck it doesnt matter the coil will still read................. it being unaligned isnt going to magically make it not read
  2. My bad I meant if the coil isn't centered, not shifted motor. ............a coil not being centered will not cause it to read improperly unless he played it for soooooo long it rubbed through the former and into the coils shorting them out or rubbed the coil on the outside, but sense he mentions nothing about rubbing is this a likely scenario.............
  3. a shifted motor will not cause a coil to read incorrectly holy fuck where do people get there information.......your tinsel leads should be sewn down to the spider underneath the cone and soldered to the terminals
  4. if you have a dual 2 sub each terminal should read 2 not 1 now as far as one terminal not reading try and take a reading from the tensil leads if you get a reading you need to resolder that to the terminals if you dont it sounds like half the coil is dead so you will need a recone
  5. Ya said that already. Noob got to say it twice for effect sometimes
  6. getting arrested isn't a big deal. It happens to the best of us. But what you do to save your own fucking skin afterwards is what matters. Let me make that clear. None of us are saints. But if you do something to get in trouble you take your punishment and do your time like a man. these are felony drug charges... seem pretty serious really has nothing to do with it
  7. Said individual has been shady for a very long time but this is a new low, i feel horrible for the people effected, BUt atleast now people know the true character
  8. depends on power, these subs technically arent designed for 4th orders
  9. Good luck getting enough spider to allow any excursion. I know you look to have changed your mind a bit which is a good thing.Just a quick FYI, the Level 6 coil is 3.5" in diameter. It doesn't leave you with much meat on a typical 9.25" spider. The new 6 spoke basket that Fi/Crossfire came out with will accommodate a 10" spider. Look for the Crossfire XSv2 12" in a blowthrough in the near future. Incorrect. The Level 6 uses a 4" coil. To be built it would use a TC frame and 10" spider. Same spiders that are used on the 15" and 18" versions.Oops, I was thinking of the Level 5.Can I see a tape measure on the Ti basket to show it's truly a 10" spider? My Crossfire C7 12s utilize the 4 spoke Ti basket and I've been told they are only 9.25" spiders. I know there is a reason that Roger won't put the big XS motor on my basket and that's because he said there isn't enough spider, hence the reason they tooled the new 6 spoke Ti basket with TRUE 10" landings. they are true 10" spiders I'm sorry, I need proof. I need to see a tape measure on the spider and spider landing to believe it. Not trying to beat a truly dead horse, but.... on your web site. 9” OD Linear roll spiders site sucks hasnt been updated those are the old spiders if you noticed the 15 isnt on there eithere thats how i know they are larger =)
  10. no the former now is long enough it would just need to be assembled in a different way so that there is space between bottom of cone and spiders. I have an idea how to do it but it may not work either.
  11. yea it could work but in my opinion its not worth it. xl 12 is where its at from the testing ive done and seen (as far as 12s go within dc audio)
  12. the suspension isnt the issue really, im going to do my best to explain this. the magnet is larger in the frame so if put into an enclosure the majority of the back wave gets blocked by the motor and it kills output say you flip it and invert it once you start to put power to it the cone will start hitting the spiders because the cone is a few inches away from the spiders just how it is so when it starts to really move they will hit....now if there was a way to space the cone off the spiders it may work idk for sure but would still have to be inverted and the output probably wouldnt be all that great nor worth the trouble in my opinion. no idea if that makes sense but hope so
  13. there are a few out few people have made them work few people have destroyed them not saying it cant be done however an xl 12 will be louder and take more abuse if cody wants to try and get you parts thats on him just know there will be no warranty and it is not a good idea......matter of fact go on facebook and ask rusty for one see what the owner has to say about it
  14. Good luck getting enough spider to allow any excursion. I know you look to have changed your mind a bit which is a good thing.Just a quick FYI, the Level 6 coil is 3.5" in diameter. It doesn't leave you with much meat on a typical 9.25" spider. The new 6 spoke basket that Fi/Crossfire came out with will accommodate a 10" spider. Look for the Crossfire XSv2 12" in a blowthrough in the near future. Incorrect. The Level 6 uses a 4" coil. To be built it would use a TC frame and 10" spider. Same spiders that are used on the 15" and 18" versions.Oops, I was thinking of the Level 5.Can I see a tape measure on the Ti basket to show it's truly a 10" spider? My Crossfire C7 12s utilize the 4 spoke Ti basket and I've been told they are only 9.25" spiders. I know there is a reason that Roger won't put the big XS motor on my basket and that's because he said there isn't enough spider, hence the reason they tooled the new 6 spoke Ti basket with TRUE 10" landings. they are true 10" spiders
  15. It's been done before and like 88 said, the results weren't what you'd expect. If you want a sweet 12 that will work mechanically try using a sp4 12. I have a feeling you might be in for a headache of you make those 12 inch level 6s Level 6 is a turd anyway,...imho. cut its legs out from it, meh. So you want the level 6 motor (that isnt all that) on a smaller basket, smaller coil, smaller spider? sounds like a win. it wouldnt be a smaller coil or smaller spider but there is a reason lv6 12s arent made.... they dont fucking work
  16. sure man email your max dimensions to [email protected] with the list of subs you are using and amplifier
  17. yes they are real we are working on updating our site
  18. noooooo that box is about 3.51 cubes too large my friend
  19. yes i am a hybrid dealer but no audiointensity.com is not my site its a good friends site
×
×
  • Create New...