Sinosic

whats up bumpn? i found this thing on the net the other day. what the hell is it?

why?

this is it.

this thing looks like something the local tweakers slapped together. lol

fo two 18" fi bls

good luck. maybe if the build was done in the trunk. but that doesnt matter cause. "when building a t-line for a sub based on Fs, you need to keep in mind the speakers Qts, and Qms, they should be low for SQ, Qts of .40 and lower, and Qms of 7 and lower will work great. " forevrbumpn

try 2 seperate chambers with there own port firing the same way as the sub, back. fiberglass the corner infront of each port and in the port bend. if you dont want do glass then aleast 45s in both corners. i did that for a customer than it sound good and got hell loud. the guy had his subs in the same box that your using in the pictures.

t-line for both subs will not fit into your trunk. those box demensions will sound good. i would 45 the bend in the port and the corner straight accross from the port. double up the baffle and add internal bracing if you think the box may flex at all.

nice. it would be tight if he teamed up with someone that could do the drum line..... with a triton

t-5 for sure

1 cube per sub.

.88 cubes sealed i just read on the net. hope this helps edit. .88 is for a 12" i just read your first post. my bad.

s12c? dual or single voice coil, how many ohms

whats the model number? i can use bass box pro 6 to help you out.

nice. very nice

he did huh.

damn thats loud.....lol http://vids.myspace.com/index.cfm?fuseacti...videoid=7957477

i think i watched it about 5 times http://vids.myspace.com/index.cfm?fuseacti...VideoID=8453243

why do they want the video? i personaly would keep it. its kinda like a trophy.

i didnt feel it. when this happen?

very nice ken. i never thought of doing the second half on top like that. i bet that sony sounds very impressive in that box. i have a buddy that has that same sub in a 1 cube sealed enclosure in his eclipse and i gotta say that sony in a sealed box sounds decent. i can only imagine what it sounds like in that t-line. videos, we want videos. nice work bro

where you located?

this is a project i started today. this is a 1994 s-10 blazer that will get all of its interior removed and sound deading applied. well for sound deading patrick from robotunderground suggested 1 part silicone 2 part caulk mixed 2gether with 60 grit sand for wieght. thats 2marrow and we will see how it works out. after sound deading the blazer i will build a enclosure for 4 15" brahmas. the enclosure will have a black high gloss finish, kerfed port and fiberglass on the inside, double baffle, and alot of internal bracing. after subs and box are installed, the memphis mcd4k amplifier will be mounted just behind the front seats, along with 2 deep cycle batteries. then run all the power cables and speaker wire. install 3 componet sets. also the center console is hammer so i will do something to fix that up. also a 200 amp alt needs to be installed. there might be somethings i forgot. well these are the pictures for today DAY 1 before after 2marrow sound deading..........

this is a project i started today. this is a 1994 s-10 blazer that will get all of its interior removed and sound deading applied. well for sound deading patrick from robotunderground suggested 1 part silicone 2 part caulk mixed 2gether with 60 grit sand for wieght. thats 2marrow and we will see how it works out. after sound deading the blazer i will build a enclosure for 4 15" brahmas. the enclosure will have a black high gloss finish, kerfed port and fiberglass on the inside, double baffle, and alot of internal bracing. after subs and box are installed, the memphis mcd4k amplifier will be mounted just behind the front seats, along with 2 deep cycle batteries. then run all the power cables and speaker wire. install 3 componet sets. also the center console is hammer so i will do something to fix that up. also a 200 amp alt needs to be installed. there might be somethings i forgot. well these are the pictures for today DAY 1 before after 2marrow sound deading..........