Jump to content

ChevyBoy95

Members
 View Profile  See their activity

  • Posts

    6400

  • Joined

  • Last visited

  • Days Won

    9

 Content Type 

Everything posted by ChevyBoy95

  1. ChevyBoy95
    Yea an just for fun, I checked my voltage at amp (AQ1200D at 1) and my drop is from 13.98v to 13.69v, on my highest listening level. Battery up from reads 14.08v but didn't measure it's drop.
  2. ChevyBoy95
    Ehh maybe, I checked yesterday and I feel confident with the amount of open space to the side of my current alt, I could fit a 2 more alts if I had the fab skill, as in room, not that I would. Dual stock is an option.
  3. ChevyBoy95
    Yea I need to look around. Even though mechman and dc power make solid units, I don't want to spend 450-500 dollars on a alternator, but idk I might have to.
  4. ChevyBoy95
    As of now I'm checking out DC Power to see if they have anything that fits my application, which is probably like 220 amps or so. Hopefully I can find one that isnt $500 though.
  5. ChevyBoy95
    please base your comment off of experience, hands on experience... not to be rude to anyone.
  6. ChevyBoy95
    My front battery spot wont hold a REALLY GOOD battery, tried to find an XS or Kinetik to replace but the juice wouldnt be worth the squeeze in that sense. I could add a fat ass batt in the back, i would just need to find a place for it.
  7. ChevyBoy95
    trust me i know the whole, it takes power to make power, but for my application, hence not competing, i was looking for a daily thing, drives usually never over 15 or 20 minutes, and bassing about 10 of those minutes.
  8. ChevyBoy95
    Ok i have big 3, big ass interstate battery, stock alt (i think its like 110 or 105 amps), as of now i have a AQ1200D at 13.6 volts and 1 ohm, full tilt with virtually zero voltage drop. What would be better, 2 batteries (roughly 250 ea) or 1 HO alt (roughly 400) around 250-280amps? Looking to run 2 AQ1200Ds for daily.
  9. ChevyBoy95
    x2 I am running a AQ1200D and a DSC450(50x4) and have zero drop. Steady 13.6v full tilt, stock alt, no extra batteries.
  10. ChevyBoy95
    yes good amps. and underrated.
  11. ChevyBoy95
    one gains 10, other loses 10. its simple math.
  12. ChevyBoy95
    could make some... if you have some little left over pieces of mdf and some nuts and bolts.
  13. ChevyBoy95
    Soundstorm Labs "1600 watt" amp. Then a Pioneer GM-7200m.
  14. ChevyBoy95
  15. ChevyBoy95
    congrats Meade!
  16. ChevyBoy95
  17. ChevyBoy95
    None of those would work, he needs a final load no less than 2 ohms.
  18. ChevyBoy95
    Wire all the coils in parallel, then wire the subs in parallel in pairs(now there are 3 pairs of dvc4s wired to 3 1 ohm loads). Then series them together aka 3 ohms.
  19. ChevyBoy95
    2 4ks on 2 SMD 15s? In that old half wall style. That was in it way back.
  20. ChevyBoy95
    I think you just have to reverse the wiring on the two inverted ones. IM NOT SURE THIS IS CORRECT, JUST WHAT I HAVE HEARD
  21. ChevyBoy95
    nice pun.
  22. ChevyBoy95
    http://tinypic.com/ after you upload it with the big green button, find the coding that has the and copy the whole thing and paste it in your post. i got ninja'd!
  23. ChevyBoy95
    and the way my spot was were people usually run power wire, up at the pedal area, is so cramped and a hard position to get to so i went to home depot and got a bit(up to 3/4, not a unibit, and it was like 7.50) that bores(dont know if i spelled that right) metal and picked up my dewalt impact and went to work. took like 5min to run my wire.
  24. ChevyBoy95
    i dont have a tahoe but i have a chevy. and i havent finished cleaning it up, etc, 4ga hole siting there and stuff like that, but you get the idea.
  25. ChevyBoy95
    i did. i dont have anything covering the outside of it but it is also like 18inches or more from the ground and ran above the frame and almost completely shielded from the ground.
×
×
  • Create New...