Jump to content

MrSkippyJ

Members
  • Posts

    10293
  • Joined

  • Last visited

  • Days Won

    22

Everything posted by MrSkippyJ

  1. Finally got around to using this thing and man, what a difference it made. I was finally able to get the hiss out of my system. I was able to turn my sub amp up more than before and my mids and highs amp down! I had my input level (gain) set on my 3sixty WAY wrong. Now with everything set correctly, the bass is louder, even seems as if the response is much flatter. The lows are MUCH stronger than before too. I don't have a TL handy so I don't know if I gained any on that but it sure sounds like I did. Old score was 142.7 (I think) so we will see what happends at sometime. My mids and highs came alive doing this. I had them "ED'd" before and they sounded good. Now the EQ is flat and they are just so much more alive, much better mid bass response too. I think getting the noise out of my system really woke them up. Can't even wait to get them EQ'd!!!! Here is some pics of the gains, before and after. Mids and highs before: Mids and highs after: (much lower) Subs before: Subs after: (much higher) sorry so blurry!
  2. I tried it both ways, couldn't tell a difference in where the gain was set by looking at it. But damn, I never knew how much noise I had in my system. I got everything set and turned it on and had to immediately turn the level down in the 3sixty software for my mids and highs. Took a TON of noise out of my front stage sub stage is louder and seems to have a flatter response too. Overall, without any EQ'ing and am happier with how is sounds now. Took some pics I will post up later with this review also.
  3. one more question, does it matter if the car is running or not? I don't know enough about how this stuff works to know that one.
  4. start with the settings FLAT on the 3sixty.2 software bro. Yeah I will, I meant the level settings. EQ will be flat. level settings flat too. Put them at zero. Ok cool, that is what I thought. That just means the level settings are all the way up and I wanted to make sure that was correct. My amps and 3sixty are under my seats and I can't get to the speaker terminals to take the speaker wires out or get to the 3sixty at all, without taking my seats out. Just wanted to make sure I understood everything before I took my seats out, put them back in only to find out I didn't do it right Thanks for clearing it up!
  5. start with the settings FLAT on the 3sixty.2 software bro. Yeah I will, I meant the level settings. EQ will be flat.
  6. so start with the settings in the software all the way up? Forget that! I didn't read what you wrote first. So start with the software levels not all the way up, maybe 3/4 up... Adjust the gain knob on the outside until distortion free? If by chance I can't get rid of the distortion light, then adjust the levels in the software down, right?
  7. I have a factory h/u---->3sixty.2------amps I set the h/u by hooking the DD-1 up to the speaker outputs as mentioned in the manual. Then, can I check the output of the 3sixty.2 by hooking the RCA cables directly into the DD-1? Do I set the level of the 3sixty to maximum (not the input level but the output level in the x-over section) and then adjust down later if need be? And of course setting the amp gain I understand. Also, does it matter car running or not?
  8. A port for 4 12s is going to be a lot bigger than you think. Be it a ported or 4th order.
  9. I'm remedial? And you think a graph that represents how much a piece of metal moves is a measure of sound. But since you weren't conversing with me, in an open forum of all places, I will be done.
  10. yes.. and i wanna see the graphs shown both ways (blue over red, then red over blue) with a better graph resolution around the 20-200 hz range (he said he did a wide band sweep i believe?) He never measured any sound at all. He used an accelerometer to measure how much the metal moved... sound waves interpreted by an inanimate object is movement. oh my god. there is nothing on the graph to represent frequency. You can't highlight, increase resolution or do anything else to something that isn't there.
  11. yes.. and i wanna see the graphs shown both ways (blue over red, then red over blue) with a better graph resolution around the 20-200 hz range (he said he did a wide band sweep i believe?) He never measured any sound at all. He used an accelerometer to measure how much the metal moved...
  12. Your saying that means you missed the point of my post, and so did jon as it seems. oh well, ill carry on misunderstood and y'all carry on selling stuff that doesn't do a bit of good for half the target audience of this forum. Note the gfaphs had huge spikes down low, where most of us want deadening to begin with. So what was your point?Besides sticking up for peel and seal. It reminds me alot of the people who bought a junk woofer and swear by it when everyone else is telling them its junk. They dont want to admit that its not the greatest. If you want to run peel and seal go ahead just stop saying its cheaper and does just as good a job. other then the fact that sound deadner works great for people who aren't loud my underlying original point wasn't a point at all, it was a purpose. Purpose was to allow someone who does a shit ton of work in research to be a better person and calmly prove me wrong. Not be bitched out by nuthuggers and the like. but an ulterior purpose emerges here, the one where i've been silently protesting said nuthugging noobs from day one. Think research test FOR YOUR SELF edit: oh and btw, i'm not sticking up for shit. i truely wanna be convinced, and not doing 100% vs 100% coverage just throws a loop of doubt in my mind. You never answered my question.
  13. What do you mean spikes down low? I don't know... As the graph moves horizontally, that is the time frame, starting at 0 and going all the way to 120 seconds. The vertical peaks is the amplitude of the vibration, higher the peak, the more it vibrated/registered. And I appreciate all the feedback, be it good or bad. Really I do appreciate it guys. My guess, and it's only a guess, is he thought you were recording sound rather than movement.
  14. Your saying that means you missed the point of my post, and so did jon as it seems. oh well, ill carry on misunderstood and y'all carry on selling stuff that doesn't do a bit of good for half the target audience of this forum. Note the gfaphs had huge spikes down low, where most of us want deadening to begin with. What do you mean spikes down low?
  15. define both channels...you have a 1 channel amp!
  16. because you can't. if you have a 2 ohm sub wired to 1 ohm, that means it has D2 voice coils. Can't make D2 be 2 ohms on an amp!
  17. haha yeah. damn man I forgot to respond. The first one, mids and highs just seemed to get quieter. Bass didn't seem to change much. The second one (one legged mother fucker) had spots where the bass go low and loud. but the rest seemed to be normal. I really appreciate you taking time out to do this. I have no clue how to do this stuff!
  18. how obvious to the average ear is the difference between the slew rate and dampening factor on the same amp at 4 ohms and 1 ohm?
  19. A full run to the battery will almost always be better, just not always needed. In this case, me personally I would do a run of both + and -. Reasoning behind this which part?
  20. A full run to the battery will almost always be better, just not always needed. In this case, me personally I would do a run of both + and -.
  21. oh really?
  22. oh man, this takes me back to my first system! Mine didn't look so good though. I really like this!!
  23. Play that fucker and let er rip!
  24. put em in and let em bang!
×
×
  • Create New...