Jump to content

MrSkippyJ

Members
  • Posts

    10293
  • Joined

  • Last visited

  • Days Won

    22

Everything posted by MrSkippyJ

  1. you have the tool in your hand to find out what you need to set it at. step 1: Hook DD-1 up to the FRONT RCA output of your head unit. Use 1khz: 0db track, turn your volume up until the 1khz light stays on, then back it down until it goes off. Write this number down! step 2: Hook DD-1 up to the SUB OUT of your head unit. Use 40hz: 0db track. With sub level at 0 (or whatever the minimum setting is) turn the volume up until you see the 40hz light stay on, then back it down until it goes off. If the light doesn't stay on by the time you reach MAX unclipped volume from step 1, then start turning your SUB LEVEL up until the light stays on. If you want, and I suggest it, set the sub level somewhere a little lower than clipping level to set your amps. Write these numbers down (max volume and sub level setting)! Step 3: With your head unit set to max unclipped volume, sub level turned to appropriate level (as determined in step 2), using the 40hz: -5db OR -10db track (depends on what you listen to most), slowly turn your gain up until you get a solid 40hz light, then back it down until it goes off. Step 4: Set your head unit to max unclipped, using 1khz: 0db track, turn your gains up on your mids and highs amp until the 1khz light stays on, then back it down until it goes off. Step 5: Enjoy
  2. why are you setting the gain between 2 blips? has this been answered in all of this already?
  3. but you still have to have something to verify your signal isn't clipping.
  4. But keep in mind they have no way of knowing if the input signal from your headunit is clipped. The clipping light is only checking the output of the amp.
  5. http://www.maydaybrewery.com Love this place. The jubilee is my favorite from them.
  6. I think Tony D said it accounted for that somehow, that's why you are supposed to set your amps with the car not running.
  7. http://www.stevemeadedesigns.com/board/topic/188255-are-those-amps-in-yet/?fromsearch=1
  8. Might be better to call them.
  9. I thought the 10k was rated at 12v Looks like I was wrong!
  10. like I said, Tony D says it's fine and that is good enough for me.
  11. Tony D said no, it's accounted for somehow. How that works is so far over my head though.
  12. Cover their ass from what? I was told to set with the engine off to reduce the chance of extra noise that could be in the system. Seems like the question is what effect input voltage (power side not signal side) has on gain. I won't pretend to understand enough about how amps work to know the answer.
  13. I agree. The people who can run more than rated already know when to stop. If you have to ask where that limit is, stick with the manufacturers recommendations. I wouldn't recommend suggesting nearly 2.5 times the manu's recommended specs for OP.
  14. Cock addicts.
  15. not really, just anything that will fit between the panels and metal. You can use expanding spray foam but you have to be careful with that stuff and make sure it doesn't get everywhere. Make sure the panels are tightened down too, loose screws and connectors will make it more difficult to stop rattles.
  16. deadener lowers resonant frequency of a vehicle, it isn't supposed to be a rattle stopper or to quiet noise. It can do those things, but it isn't very efficient at it. If you want to stop rattles, tighten the connectors and put something in to keep panels from hitting other panels or metal (like some foam padding between panels and metal)
  17. what is your goal with deadener? Also, probably going to get lots of people saying to use Second Skin over hush mat since you posted in the second skin section and all. Double layering deadener seems to be a waste to me, unless you are trying to do something other than deaden your vehicle.
  18. If you bought an album and then want to rip it onto the computer then it depends on the rip quality. 320kbs is probably what you should rip it at. but lower rip quality shouldn't introduce clipping so it should be ok. The sound quality might be worse, but it should hurt equipment.
  19. car running according to Tony D
  20. that shouldn't introduce any clipping, but that doesn't mean the music wasn't already clipped. But, that shouldn't be any different than if you played it from the CD
  21. youtube music bass heavy music using -10db and overpowering all three of those are likely playing a part. Especially that youtube part...
  22. they have to make money sure, but why lie to him to do it?
  23. True, he can't make a 2 hour 160 mile trip either, especially when he has no faith in what they will decide to charge him when he gets there
×
×
  • Create New...