slow240sx

The surrounds r also different than the regular pa versions

Just got the new parts express catalog in. Eminence has some new car speakers out called "eminator". The 6.5" is $30 and rated @ 100rms & the 8" takes 125rms for $33. They look to have a treated paper cone. I haven't used them but just posting to let people know.

I got a dd 9515g d4 I'm not using now

been lookin @ that as a possibility, but checkin other things out too. I hear they make good power but r not efficient. Trying to get by with only 2 batteries to save on weight

been lookin @ that as a possibility, but checkin other things out too.

Lookin to buy in next 2 weeks. About $500 but might spend more for more quality/power.

Lookin for amp that makes 3000 or more. Sub is dual 1, so need to run @ 2 ohms or .5 ohm. Need to power a level 5 18". Already got an autotec mx5000 which does 2400@2 ohms. Lookin for more power

I got a ruger sp101. I looked @ s&w before I bought the ruger. Ruger seemed more solid & built better to me. Had it for 6 years without any problems

In my car with about 3000 rms, I only got big three, 80amp alt and 1 agm battery. Can only get a little over a minute of full volume playing till it goes to 13.0. When I'm driving I've never seen it go below 13.5. Plannin on a bigger alt soon

Ok thanks, wasn't expecting prices posted, but I got a pm that took care of it.

I just ordered a level 5 18" sub. What is the price for a recone should I ever need it? Do u just send me the recone or do I have to send the sub back to you?

Considering running the 18" level 5. Any other suggestions? Will this be ok on 2500rms for a month or 2 till I find a bigger amp?

How much will level 5 take daily? Got autotek mx5000 but will b switching that out in few weeks. Was gonna look for 3000rms amp but willing to do maybe 2 2000amps strapped if it will take it.

How much would I b able to give it down the road daily? Have u heard a death penalty to compare it to?

Workin on a new box for a wall setup. Currently have a dd 9515g. Box will be about 10 to 12 feet net. Electrical good to go. Will b runnin 3000rms to it. Some friends r runnin ia death penaltys & they takin 3000 daily. Was thinkin 1 of those would run off that power good. Any other suggestions for a sub? Tryin for around $500 or so. Will b tuned to bout 30. Lookin for descent spl but mainly for daily driving.

I got a 240sx hatchback. I did sub up port up with my 15. Sub is a few inches off glass and it flexes the whole hatch a good inch @ times. Also had two tens, subs up, port back. It sounded like it hit a little lower but had more rattle in taillights

There's a section on fullsizechevy.com u can c some pics of different drops to c what u like. I got 4x4 chevy so I don't know bout droppin it but I know there's info on that site bout lowered chevys

I always liked ruger pistols

Sorry... then u could buy a reciever or amp on craigslist & do the same for pretty cheap.

Didn't u already say u had sub amp? Id use 1/0 from battery to the rear of car. Then use distributionblock that has a few outputs. Try to find biggest wire from distro block to the amp. Different brands of wire r actually thicker than others. U could take amp to stereo shop & have them see what the biggest wire u can fit into amp. Use biggest wire u can fit into terminals. For mids amp, I would go with about a 75x4 and set hp crossover and gains accordingly. Its usually to have a little extra power for headroom so u don't try to overdrive amp

They got a peerless 8" sub for $24 that's pretty descent @ p e.

U could go to pawn shop & buy a cheap name brand receiver that u can hook dvd and computer too. It would have enough power to do what u need. Check clearance mids @ partsexpress. U should b able to find a deal there for something descent

U could buy a cheap circular saw for $30 for harbor freight tools. Use a straight edge and 2 c clamps & u could do it yourself

I usually clamped a straight edge along the cut I want to make. Then I use a circular saw with the blade angled. Every once in a while it will turn out ok but it usually makes a crappy cut. I got a table saw now and that's all I would consider using for it