audiofanaticz

Opps, almost forgot. About 25 minutes ago the cops left my house... Someone called meh in. Funny thing is I was in the country beating and I went past this chicks house that got wrapped up in a couple hundred feet of 1/0 wire (some know what Im talking about) and her family is friends with this cop. Took almost 2 hours for them to come to my house, so Im sure the bitch is still pissed cuz i kicked her out. Didnt think of getting video when the cop was here, but got the cop pulling away, but it dark out.

Lol. Im just going by what Im told :hairtrick: :hairtrick: Yea I picked these up dirt cheap, from another competitior that sold his crx. I was to buy a memphis moho 4kw for $500, but it fell through and the guy didnt need money no more. so I get these 2 even cheaper then what the mojo would of costed me.

so far so good. they just little ab's but they sure are packing a bang!

Nothing great. Still gotta tune her up more and clean wires up and all. But the end of the video is the best. I forget how to embed videos or whatever, so Ill just do it the old way and post a link http://www.youtube.com/watch?v=XbalAuJK3HE

a dd 9518 will take crap loads of power, so will a Fi Btl. Your main and hard decision is how bad do you want a burp system vs daily. A btl will take a good 3000+ watts rms of "clean" unclipped power daily. The DD will do about the same if not more. The btls specs say to tune low, in the low 30 hertz range (more for street beating) a dd reccomends 40 hertz. Of coarse you can tune whichever sub to which ever frequancy you want, but I think in a all out spl stand point, I think the DD will get a bit louder

that shit is straight up beatin! looks like you where at your house, how did your neighbors like it? LoL :hairtrick:

thats funny now!!! great photochop!

Lol that is too good jack!! :clapping:

i posted that site on another thread i think banging explorer was gonna look into it

Not only that, its a flat panel rear projection tv. meaning there is no tv tube, like a crt monitor would have. the screen doesnt get magnatized. LOL Imaging how heavy a tv would be if it had a 52 inch glass tube in it!!!

what is he looking for? www.car-part.com is the site I think. searches salvage yards inventory.

emat made a funny!!!! :clapping: :clapping: :clapping: +1 rep but let me get this straight? you got a youtube hater, and now your made, but also a hypocrite becasue you are just like this guy hating on you?

that is all :01nocomment8so:

Looks like you did a great job with the felt.. The show tomorrow sounds like its gonna be a bummer, not many loud people attending. Im kinda glad that Im not making it there this weekend, but sept 7th fo sho! glad you got that window fixed bro!

x2

no, I didnt pull the wire... LoL its common sense never to pull a plug out by the wire, weather it be a electrical plug, rca cord, usb cord, or anyother cord. Thats how plugs break. I took the left channel off, then took the right channel off and then it just fell on my bumper. I easily resoldered the cable and just got them around incase someone ever needs some, but they wont be back in my ride! lol I got no reason to make it up, I just was not impressed by the quality from brand new set, hence why I gave a brand new 4 channel set away. The wire is A+++ but will never go with their interconnects again.

Well, I bought them for my car, and I used the 2 channel set one time to strap 2 rf 10001bds together, and when I took it all out to start on the wall this is what i had... Ill never buy them again.

Stay away from those rca cord's, they are crap IMO. The ends like to pull right off. Did it to a 2 channel set I had, then when I sold chode my audiocontrol line driver, I tossed in the new set of 4channel rca's that where never used, because I had custom ones made (even tho they failed!!!)... But the knu flex wire is good shit! its tinned copper (but a lot of wire now days is do to copper prices). I ordered about 200 feet of it, for $3.25 a foot you cant beat the price compaired to other wires. I think I got another 50' roll someplace around my house too. I sell it for $4.00 a foot whenever I do a install. The knu klm wire is decent stuff too, it will get you by when your short on cash. The conductivity of the wire is not the greatest, but you will still get more bang for your buck then going out and buying some lesser quality brand wire for more money

looking good, I just hope you aint planning on burping it. looks like it passes the b piller, but will make a good bassracer!

I got a brand new one in package also, but I think the best price I could do on it is $90 shipped, which is a couple bucks more then the ebay auctions. I never used the remote, but I did open the package one night when my battery died in my current remote, so I opened the package to take the new battery out of the new remote so I could fall back asleep and not have to go buy a triple a right that second. I would replace the battery with a new one if you bought it. Like I said I had a couple, my old broken one (it stopped vibrating, the motor broke off), then I ordered one from a powerseller on ebay and took months to recieve the remote, so then I bought one from bestbuy and took it up the a$$ by paying around $150 for it, then the ebay remote showed up. lol

Do you know how to solder?? I got a old lcd remote that has been dropped a few times, and something else broke off on the board, but the screen is still good. There are 12 pins holding the lcd on that would need to be unsoldered and resoldered. You pay shipping and its yours. I also bought one on ebay for like 100$ and I waited and waited damn near 2 months til I got my remote, by then Id already spent $150 for a new remote from bestbuy, and 2 weeks later the ebay one came. Seller had thousands of these remotes and many others, but never responded til emails. I forget the powersellers name, but id remember if i seen it.. lol

thats a nice fab job, it looks like the new cross member shouldnt drag no more. Are those scratchs and drags on the frame rails from laying it?

welcome aboard

Ive heard 2 different things. 1) It is legal to obstruct your rear window vision IF you have 2 side working mirrors on the outside of your car AND if you are driving a vehicle such as a truck or van and have truck license plates on it. i guess that vehicles with truck license plates have different rules, like if you have a mini van and you take out all rear seats it IS ILLEGAL unless you have it registered under a truck. I have no idea if you can register a car as a truck, but I do know truck plates do cost more. At least in WI. 2) I hear its legal no matter what vehicle as long as you have 2 side working mirrors. But to me this does not make sense because if this would be legal, I got pulled over for obstruction of vision many times a long time ago for having stickers on my back window, and that is with 2 working side mirrors, and my rear view which I can still see out of. So if a sticker is not legal I think a wall would not be legal either. Cops in my town know I got a wall, but they know I dont go listening to my stereo all jacked up disturbing the peace in the city limits, as well I got my big KB sticker in my back window. Ive gotten pulled over for failure to use turnsignals before, and they havent said a thing but Im sure if they want to be pricks, they could. I also thought about putting a rearview camera on my car for added safty while driving, but in many states it is illegal to have a screen in the drivers eye that is playing a video or has movement.

aww man you didnt see the video of me wrapping her up in over a 100 feet of 1/0 gauge powerwire.. she was in her bday suit