audiofanaticz

^^^^^ Good Idea! LOL

seen that, thanks bro! But just like his youtube page, he has no real info posted about himself. he hiding like a bitch, so he needs to be treated like a bitch!

Normally I wouldnt James, but when you talk shit and its nothing but lies, I will worry about it since I goto MI every now and then, so Im down to find out who he is, and hell, Ill make a youtube video as I punk him out.

roflmao derrick!

So today I noticed that I was getting kind of close to 1000 subscribers on youtube, currently 868 subs. I figured to give back to those that subscribed Id do a little contest, where there are no losers. So I made a video and said if I can get to 1000subscibers by July 4th 2011 (1 week from now to get 132 subscibers) I would release a song. A song that I had paid to have BigPimpin91 make for me, only for me, and no one else! However over the past couple months I have shared it with a few people to try out if they would make a video of it being played... I also know that some wannabees that call themselves "DJ's" have tried to Imitate this song, and failed miserably...... ... So I get home from my Moms house after doing yard work for her and check my comments. Noticed I had only 100ish views, 2 dislikes and 9 likes. I read my comments and replied like I normally do and seen this. So now Im trying to figure out how its a free song, when I paid BigPimpin91 to make this song for me, and me only? What does he mean with all these extra subs and junk sitting around. All the subs and amps hanging up in my garage is all blown shit, so am I expected to give out blown audio shit thats not worth a thing, stuff I use as wall art in my garage. Or is he talking about all the woofers I had in my dinning room when I had 4 Sundown Nightshade 12s to recone for a friend, or the 3 Sundown SA-12s that I built a box for, or the 2 Sundown Zv1s that are CapallaSS's that I blew and am reconing for him, or the other subs that are my buddies. And how am I a cheap fuck? Because Im asking for people to tell their friends to subscribe to my youtube channel asking for 132 more subs, and will give EVERYONE (not just 1 winner) the song I get so emails, PM's and Comments about? So who is this kid that hides behind his keyboard, anyone know????? I guess it comes down to me being unemployed and working out of my garage on installs for my money to live off of, build my stereo, and go to competitions that I have to give EVERYBODY something expensive to keep them as a subscriber?? Whatever, pretty sad, and just shows how big of a self centered , piece of shit you really are! http://www.youtube.com/watch?v=r2VsF8Gu63Q&feature=channel_video_title

Im around 4.06ghz on my computer, 3.2 or 3.4 stock iirc. 800mhz oc is easy to reach. but it has more to do then just editing voltages. your biggest hassle is going to be your memory timings, and finding the correct memory divider to keep your memory right. you should also take small steps when over clocking. goto 3.3, then 3.4, then 3.5 etc until your desired speed, and make sure each one of them are stable overclocks. just dont go balls out because you have to changes to keep everything in check. Your best bet would be to check the forums out on overclock.net Im not a intel user, and i know things are somewhat different.

I know Audioanonymous from the competition scene, he always has done great work no matter what it is, he strives to be the best at what he does!!

what kind of money are you looking at spending for the new battery? being a newer dodge magnum, you should have a decent alternator on their already, with a hairpin stator that should do 160ish amps. Is your factory battery located in the back of the vehicle like it is on the chargers? if it is, I suggust running 1/0 gauge from your alternator charging stud to the back of the car to the positive post on your battery. Also doing the same with the ground, come straight off a bolt holding the alt to your engine, and run it to the rear of the car to the negative on your battery, and you could upgrade a ground from that same alt bolt to your vehicles chassis, if you have the spare wire. ************The factory 6or8 gauge wiring they use to go from front to back is not sufficient at all!!!!!****** Doing the above should really improve your voltage situation, and pretty much is doing the "big 3" upgrade people talk about, but due to the rear batteries you have to use a lot of wire. Also if the battery is in the spare tire well you have a bit of room to work with, your best bet would be measuring the dimensions of your stock battery, and then any additional clearance you may be able to find for possibly a bigger battery. Once you have all your measurements you could goto XS Powers website www.4xspower.com and look at their batteries that fit your needs. Most likely a D3100 should fit if you lay it on its side, or a d2700, something along those lines.. I know I put 3 batteries in my buddies charger spare tire well without issues, but he has no spare either and that helps a lot. Lol

Ive always used CA Glue for complete woofer build ups (spiders to basket, surround to basket, dust cap to cone, spiders to former, cone to former) pretty much the only glue I use to do a recone without issues also. The only time I use a rubber glue is when reconing a Digital Designs with a carbon fiber dustcap. However, all CA Glue is not foam safe and may eat/burn your surrounds, so getting a good CA glue is a most.

soul survivor is a banger!!!! I could barley keep my hand on my steering wheel when I was driving.

but he said "you", which is why Im confused. lol eh whatever 5am time for bed.

reconsider what?

Yes, its the FULL CD, slowed a bit, and bass enhanced. Mostly looked clean for clipping from WMP with settings on flat. I also checked it with 2 virus programs and a malware program. IT IS LEGIT!

Its the full cd............

Ive always thought You want to fuse 250-300A with good 0gauge. Isn't 175A a bit small for 0gauge Knu? Educate me please The amp is only rated for a 200amp fuse, why fuse the wire larger when it is not needed? You will not gain extra voltage from using a bigger fuse. Fusing the short run of wire from the rear battery to the amp higher then manufactures spec will not help save the amp in case an issue will arrive. A 175-200 amp fuse will take much more then its rated current. There are 2 ways to do fusing. Neither of which are really wrong, but 1 is better then the other. 1- using fuse's according to the wire, ie 17foot of 1/0gauge wire = 300 amp fuse. 2- fusing your wire to the current you actually use, which means you normally need a clamp meter to determine how much current is being traveled along the wire. If you have 1 run of 1/0 wire (knukoncepts fleks for this example) a 200 amp highoutput alt, a XS Power d3400 under the hood, and lets say 3 XS Power d3100s in the rear. You really only need to fuse that wire at 200-250 amps that runs front to back, because most of your current will be used from your rear batteries while the alt will just keep those rear batteries charged.

by sub gain he means the subwoofer volume on the headunits eq.

In for the LOLs :popcorn:

Great idea with them little weights! oh and them banners TeeJayBee are the owners of the building iirc.

nevermind, he left for the night. yall missed some good music!

ttt

ttt

Kingdom of Giants live now on Ustream with Steve Meade --> Online Video Delivery This is on Chicken Hills ustream not meades! Join in and listing to some Rock and chat with Steve!!

I am pretty sure I just well whatever im sure you can guess... looks bad ass!

looks good, wish i could make it to slamology to hear this!