SojiaRaggs9000

No one?

I was talking to a friend about the dd-1 one today and he asked me a good question. Say you have an amp that does 3k but you only want to push 1k with it... How would you set the amp with the dd-1? Now I know how to do it with a DMM but not the DD-1. Any Ideas?

OK SOOOO ... I ordered 2 DC lvl 2 8 last night. So I sketched up these plans using Google sketch up. DC recommends .8 cubic ft per sub. This is what i came up with. Overall dimensions of 29.25in Width x 12in Height x 15in Depth Each chamber would be 15in Width x 12in Height x 15in Depth giving me an internal dimensions of 13.5in Width x 10.5in Height x 13.5in Depth ( 1.10742 cubic ft per chamber ) I want to tune it to 33 ish (is this a good range for these 8's?) For the port measurements this is what I got. 1.25in Port Width x 10.5 Port Height x 1.10742 cu ft gives me a port length of 26.5180... Would the 1.25in port at this size give me port noise from being so small? 1.10742cu ft - .10 sub displacement - .05583 port displacement Which would give me .95159 per chamber after displacement. Hows my math? Does the sketch up look legit like it would do the trick? Any suggestions?

I was kind of interested in this as well. No update?

bump

Looking to buy or possibly trade for 2 or more SA-8's or DC Lvl2 8's. Oh yeah Id perfer 2ohm dvc but hit me up with w/e you got.

"Have a very bass Christmas" is the first album that comes to mind... Gimme a sec Im sure ill think of more.

Im perfectly fine besides some soreness after waking up today. Seems like these dang deer has my families ticket! Where just waiting to hear back if insurance is going to total it out. Truck is worth $26k so it has to have 24K ish to be totaled out... which it should. Im just glad I wasn't driving my Taurus... not because of it being my personal vehicle...... but because my system in the trunk would of killed my ass. 2 12" LVL4 XLs, 200LBs box and D3100 would of beat me to death.

SO....... About 2 weeks ago my mother was coming home in her mustang and person in front of here runs into a deer. It was night time and raining at the time so she didn't see the buck until it was too late. She completely runs over the buck on the left hand side of the car. Antlers were stabbed into the radiator and the exhaust was restored. Anyways.... Yesterday I was coming back into from picking up a few parts for our shop and a doe runs out in front of me. I calmly just get into the passing lane. All of a sudden my rear end starts to fish tail, at which point I try to correct. I over correct, hit the bar ditch and roll the truck (side to side) 2 times while catching some mean air. Then slid for about 150 feet on its (drivers) side, filling up the cab with sand. Once the dust settled I reached up and turned off the truck and started looking for my phone. With the truck on its side I had to climb out the passenger side window. Luckily Im 6'5" and was uninjured. Truck was an 08 F250 with 59k on the clock... Total it out. Company truck, company insurance. I work at a ford dealership so we received a new truck in about 30 mins. I always wear my seat belt so I wasn't heart but... yeah our shop truck got fucked up. I got some mean whiplash but nothing major. Here is some pics...... Sorry I had to dig through sand to find my phone to call the police... I didn't think about getting pics of it. Was my first wreck ever. Got me to thinking either the sister, daughter, mother or wife of the buck my mom hit... was trying to take me out.. lol Not as much sand in it now, but still plenty in there. Damn Gas card was setting in the center console and here you can see it got jammed into the door frame The owner wasn't too mad.. was just glad I wasn't hurt. Guy in the red is the owner of the dealership.. and the other is the salesman..... Wild expressions when they first seen the truck.

Eclipse CD8445 pending trade

ttt

yeah switching between modes works too. And alright man.

Yes the display issue is fixed (which was stated above). And nah it doesn't have a "pause" button on the remote, although you can press the power button on the remote. Once the unit is turned back on it will start playing back where it left off.

Item purchased: Traded Old school Kicker ZX350.4 for his Re-coned SA-8. Date purchased: October 2011. Experience: Positive. Shipping: Great! 3-day shipping, Sub arrived in good condition. Comments: Shipped quickly and packaged well. Overall: Great guy, would defiantly trade with from again!

Eclipse 8445 8volt head unit - The head unit powers on , knobs work and light up and everything. But the display isn't working so you can't see what your doing. If you can find a faceplate it will be good as new. IIRC eBay has one for like $27. You might also be able to fix by just replacing the ribbon. Ill try looking into that. It has 4 sets of preamp out puts! REAR , FRONT and NON-FADER. It also has AUX output, CD CHANGER plugin as well as a SIRIUS plugin. Eclipse doesn't make this 8volt head unit any longer!! Comes with harness, manual, remote, mounting hardware, 2 trim rings and an extra faceplate and faceplate ribbon. . Last time I looked these sell for $399.99 new and around $250 on ebay IF you can find them. Considering there disconnected you could be hard pressed to find any on ebay. Asking Price: $200 shipped - Eclipse CD8445 pending trade WELL I DECIDED TO JUST FIX THE ECLIPSE CD8445 HEAD UNIT. ILL HAVE IT FIXED BY THE 2ND OR SO AND ILL POST UP NEW PICS WITH IT ALL WORKING 100%. ASKING PRICE IS GOING TO GO UP DRASTICALLY THO... 8 VOLT PEROUT PUTS!!! Specs: ESN E8 High-Power "Customize" CD/MS Receiver with MP3/WMA playback and Remote CD/CD-R/RW, MP3, WMA playback MOSFET 50 watts x 4 channel power output High 8 volt preamp outputs MAD GOOD! 8v preouts let you get louder (quicker) at lower volumes. Very rare! most units are only 2.5 to 5v. Wireless remote included 3 pairs of preamp outputs (front, rear, and sub) Circle Surround II Sound E-iSERV connectivity This means when reading CDs it reads 60 seconds in advance which eliminates skipping. Area Shot (basic map, arrow and text) 5-pattern various color illumination Motion picture display SIRIUS Satellite Radio Ready (tuner, antenna and subscription required and not included) Advanced 2-mode Sound Control DSP: 7-band Parametric EQ (advanced mode on) Speaker Time Alignment (to make the sound always sound centered to your position) Crossover Listening Position Selector Multi-Harmonizer Source Volume Control Memory-stick ready for other MP3/WMA playback option Advanced 24-bit Digital-to-Analog Converter HD radio-ready (tuner required) GPS unit-ready (GPS add-on required) FM/AM Tuner 8-step full dot VF display MS/CD ESN security CD Text support Aux input THIS UNIT IS AN EXPENSIVE ONE. RETAILS FOR $400 AND HAS RARE 8 VOLT PREOUT PUTS!!. EVERY THING WORKS NOW 100%!!. I popped the unit open and found that one of the capacitors broke off some how. Which I fixed!! I found the manual and another faceplate trim ring. You also get the extra face plate and faceplate ribbon that I bought. (To fix the original problem but ended up not needing but I switched out anyways.) Video Of the headunit working 100% Old video of what used to be wrong with the head unit. These Pics where taking out of my WTT thread. If they need to be updated just let me know. Audio Control Epic-150 - I made up a cigarette lighter hook up for it. Works great I only used this for testing voltage and how a new rated on the 150db SPL meter it has. (How close is the meter to a Termlab? I don't know, never had it tested) - Asking Price: $150 shipped Specs: Bass Restoration processor with SPL Display SPL Display with Microphone Included Para-BASS EQ Patented Pass Restoration Circuit Battery Voltage Indicator Speaker Level Inputs Balanced Differential Inputs

1 Pink kevlar cap (with no words if possible) to 79745

Even a blind squirrel can find a nut.

Any ideas about what ever happen to this? winner hasn't been online since 1 day before the posted announced winner as well. Not trying to start drama was just wondering about this contest. http://www.stevemeadedesigns.com/board/user/22622-whitedragon551/

Doesn't have to be an amazing amp.. Im looking to stay under $100.

Im in need of an amp that does 400-500 rms @ 4ohm OR 1ohm. Doesnt have to look amazing .. just needs to do 400-500 watts rms. Let me know what you got.

LOL yeah DJ Flula is pretty funny. Here is an old pank call he did a few years back. Pretty funny even today. I lol every time he says "I WANT TO CHICKMCFUCKIT YOUR CHICKMCNUGGET" not sure if the link is kool for public.. lol Youtube: Flula's McDonalds Tourettes Prank Call - OwnagePranks

Diesel, Whats up my brotha from another forum! You know how I feel already haha. Good stuff all around.

Does that yellow line have a fuse on it? Might be popped.

Congo Ratz whitedragon551!! Just so i understand this contest correctly... 1 sub form a vote = whitedragon551 1 sub from a a question in the form youtube video. and 1 sub for 500th subscriber. (not one because we didnt reach 500) Am I correct?

Back in May of 09 I order 1 12" DC Lvl4 XL D2 and put it in a t-line ox. Loved it. Ordered another 12" DC Lvl4 XL but messed up and though I had a D1. So I was shipped a D1 in August of 09 because thats what I asked for. Come to find out I really ordered the wrong version. The next day I emailed Rusty and he told me to just ship the old one back to him and he would get another one shipped out to me. AND IT WAS MY FAULT IN THE FIRST PLACE... Rusty had the new sub to me before i had even shipped the miss-ordered sub back to him. Just thought Id share my experience which has been nothing but good with DC.