KeepItLow91

Put a 3" RC lift on my '85 Toyota a while back. I've probably put around 1.5k miles on the lift almost all on paved road. Went mudding/climbing for the first time the other night and at the end of it all my front and rear leaf springs on the right side both became a lot 'flatter' than before. The left side didn't change. I've been told this is just the suspension and shackles settling out and the left side will do the same, but it seems rather 'extreme' in my opinion. The right rear shackle did shift backwards about 1/4 of an inch but I don't know if that could of caused the spring to flatten as much as it did. I don't have a lot of experience in this field as this is my first truck and I haven't been in the sport long so I might just be blowing this out of proportion. What do yall think? Just it doing its normal settling or is did the springs fail in some way? Only took a couple pics, can take more if asked. http://i.imgur.com/9ysuX.jpg ^^ Picture of the front passenger side leaf spring. Arrows show where the bottom of the spring actually bowed downward on both sides of the axle. http://i.imgur.com/j374E.jpg ^^ Shows how funny it looks from the rear.

Good 'ole southern hospitality.

5 internets to you sir^^^^

It's in one of Decafs first 25 zips as.. 08) Love Gettin Money - MIA. In the folder it says Artists are, Gucci Mane, OJ Da Juiceman. Couldn't find it on youtube though. Edit - 'Artist' section is obviously wrong since that isn't juice or gucci.

I was just joking bro lol, I apologize for my drunken-attempt at trolling. Good luck with your new vehicle!!

IT'S FUCKING TUNING. Lol Yeah, I'm pretty interested to see how much bump I can get out of it since it's a hatch. Couldn't afford the rare notch backs unfortunately. I'm thinking I'll probably just do one 15 tuint to 30hearts. IT'S FUCKING TUNING. Lol Yeah, I'm pretty interested to see how much bump I can get out of it since it's a hatch. Couldn't afford the rare notch backs unfortunately. I'm thinking I'll probably just do one 15 tuint to 30hearts. Man 30hurts isn't qutting it. If you tewnt down to like 22, especially since it's a hatch, you could probably do like a 147+ at 25hz. My cousins ex-boyfriends' sisters' brother did a 152 with four JL audio 14.6's at 20hz. He was turn't to like 12hz though, JL is one of the top brands though, don't know if you have that kinda cash. No offense.

My expert opinion is that it's some kind of Ford.. Everyone knows Toyota is better though haha Edit : Sayhuh is a fuckin' ninja. Btw I bet if you toun't a trunk box to 56hz you could do a 160 burp on two 12's. Shout out to Nate.

The places you buy it from almost never make straight cuts because they don't know what they are doing. aka Lowes or Home Depot The guy at Lowes somehow cut all my pieces up to 3/4" off. Needless to say I had to re-cut everything when I got home..

I live in Lyman but currently don't have a system. Ordered a PSI platform 1 15 last night, gonna run it on a DC 1.2k. Nothing special over this way. Saw this post on the main page, don't know why you put it in tunes section.

Recommended port area for four VVX 15's tuned at 22hz? Subs up port back

Delete this post.

Cheap and cheerful by the kills (sebastian remix). Never saw the movie so idk if it is the exact song. The female singer does say "its alright to be mean" repeatedly though. I found it in the double disk movie soundtrack online.

Spent a little more time looking at everything. Where the tinsel is sewn into the spider there is about a 3 inch long spot where the edge of the spider has come loose from the basket. The tinsel in question also seems too short. All the other tinsels have a decent hump in them where they have slack, if I hold the frayed ends together there is hardly any slack at all. Either way if there is no simple 'permanent' fix, I'll just send it back and pay for them to recone it or something.

Almost 100% sure this is a user-caused problem, not blaming DC at all. Just wondering if there is anything I can do to fix this with household items (obviously I have no idea what I'm doing). I don't really want to pay for a recone as I'm saving up for a new vehicle so helpful advice please! http://i.imgur.com/aSdEA.jpg Edit - DC XL 15" M1

Recone for an M1 XL 15. Level 5 upgrade with carbon fiber cap, one additional stiff and medium spider. Shipped to 29365