ChrisLun

Thanks for the design. You need to give more info....type of car, location, I mean .5^3 is a design...now use length x width x height/1728 and go from there

.5 cube

2k if I am not mistaken....

i am there, at the Luxor also..Hope to see you there

Pics, name and date....just read the rules

Thanks for the advice, i only use every few years or so....(or after I feel myself putting on too much weight), and I only use for one cutting cycle....Then I stop, but due to a chemical immune blocker my metabolism slows down to more than half the normal rate. I use to use hydroxycut, but that shit is garbage now and having to to take 6-8 pills a day is too hard on my liver. So now I just use clen. My doctor use to have me on a all natural roid, but the manufactuer stopped making it.

Looking to get a hold of some clenbuderal, and Dianabol....if you guys have any input please point me in the rift direction

Bump

I have the site, and the "YouTube" vids show people doing 150+.... I was just wondering has any one ever seen them in action.

So I met a guy today that is the only North American dealer for this company. Supposedly they are like the (Digital Designs) of Europe. Amps are rated from 10v-14v doing great numbers....subs are using (3) 154oz magnets, with 4 inch coils....available in only .05 and 1.0 ohm configuration. Besides this has any one else heard of em

Sorry bro, neither one will work. Trunk is not big enough so the solo x.....the 12's will have to sealed or undersized unless you are doing glass work in the tire well

If I were to make a square port box, like I'm suggesting? Slot and Round ports

I would do 4.0^3 with a 4" port (PVC) 4 inches long.....*****Remember to round the inside of the port both front and rear*****

Auto zone....napa....

Good looking box, how many cubes

Lol

It's good to have but not needed. You do need to study for the test. It's not just about amps and woofers, it's relays, alarms, diodes, etc.

That's it, how much for the Tahoe? I want it!

I use both, I crimp then solder, then heat shrink I do like the hammer crimper. Would be perfect especially if you don't want to solder.

These are the (4) wire strippers any good installer has on hand..... The far right are Klein 0g and large cutters, the next are your Klein dual groove crimps, the next are your Klein speed strippers, and the last are for like alarms and small gauge wires. Hope this helps...

My enclosure is not a square one.... That is actually pretty easy to figure out that one. I am horrible at finding out the CF of boxes with a bunch of angles but i could manage your box I figured I have about 6 cubes.....plus 2.5 more in the spare tire well. So about 8.5 total

Allows you to determine the "volume" of the enclosure....

My enclosure is not a square one....

How accurate is this method.....

Ok, just so that the mods don't chew you ass, you need to re-read the rules for the post