727Designs

I wish I knew you were looking for 2 ohm power. I just sold my old Mojo 2k (Rated at 2400 @ 2) for dirty cheap last week.

Next time you could use the search feature and save some time... but here it is in a nutshell: The clip light has a set rail voltage to trigger the light, when set voltage is met the light will flash. Amp may or may not actually be clipping at that point. Trust the DD-1/o-scope/etc and enjoy it.

It took me probably 10 minutes of rewinding to listen to that thing sitting there with the choppy idle before I ever made it to the flex LOL Cam specs please? Setup looks nice, can't wait to see the after alt numbers.

I've ran the SVR batteries before, decent batteries for the money we were paying for them back then. You will likely want a couple more though, 4 wouldn't be enough IMO.

3.5 and 5k to 30546 (separate prices please, not sure which I'd use)

I like to pretend it's not Monday as well, it's all good. Lol

I love my Singer alternator, and Mike's customer service is top notch. We've also had good luck with DC Power, and Excessive Amperage. The one Mechman I've been around a good bit has had to be sent in for repairs a few times, but when it's working it's solid.

Timing BELT? a 22RE uses a single roller timing chain. These trucks honestly don't too great on gas to begin with, as for the running rough since it sat that long did you pull the injectors to make sure they are all clear? Otherwise you seem to have hit all the bases I'd start with. If so I'll dig deeper.

Effing dope. Can't way to see what you do with this one Ray.

The EX250 is an AWESOME bike. Nice big aftermarket, fun to ride even out of the box, and resale is super high as everyone loves these things for beginner bikes. Some of the most fun I have ever had at a track day was on a loaner EX250. Take an MSF class as soon as you can, helps with insurance but it also teaches alot of things that can save your life. I recommend an MSF class to EVERYONE who comes in the shop, even experienced riders can learn something. For the price for what you get it's well worth it. Also can't stretch enough proper safety gear. It's easy for someone to look at helmets for example and want to buy a $100 helmet over a $300+ helmet because it's easier on the wallet... The old Bell helmets ads said it best, if you have a $10 head wear a $10 helmet. I will never wear a cheap lid. Also a good textile jacket is a good investment if you don't want to spring for leather, as is a good set of textile pants, both should have adequate CE armor. Enjoy it, some of the most fun times of my life have been on two wheels.

Does need. Lol I entered.

On my Titan I used square tubing, bolt down to the original seat mounts on the floor, then put the mount from the seat on top. On the back where the back latches I took some flat plate and made an adapter to move that latch up enough that it latched like stock. Super easy.

Not bad at all, what sub where you using? I've been tossing around the idea of selling my Singer 265A since he has a 340A unit out now, but can't really swing it at the moment... Not to mention mine is down needing a starter, and my rear window seal is shot and the box got SOAKED during the bad storms we got last week. Probably fixing to sell my amp and upgrade power wise, rebuild the box, and finally do my front stage. What's your average with the 4 8's?

Very nice! When are you doing the single 15" in your Ranger?

Did he even ever finish that build? Last I heard he bitched out. I think he has 48 sa 10s right now That setup is long gone. He had a build log goin for 20 18s in that truck but Idk if he went through with it. he has a shell built right now, don't know what's going in it.. He was saying 24 18's in his truck last I heard? Got sidetracked with his Civic though.

Very nice, can't wait to try mine out.

Last I heard it was stashed off in a barn somewhere, but that was several years ago.

I saw these pictures on Mike's facebook like 2 weeks ago slacker! Get it bolted on.

When you update this you can now add the CC-1 with mine as well.

RE's calculator isn't exactly accurate. Doesn't figure for common port walls, and there was something else I can't remember right off.

I think he's wanting the t/s parameters from what I gathered on the first sentence. Rob knows his stuff, by no means new to designing.

Also what happened where the port L comes together? Looks like a pretty big difference in height. Otherwise, do like CJ said and add a 45* in the port bend. Box looks good, not bad at all for your first kerf!

I clamped 290 watts out of one of the Boss Chaos 1250's. A buddy of mine bought it, took it back the same day.

Line Driver? Shit, it's too late for me to be trying to think. LOL LOL @ the dancing nanner sneaking into the pic.

They are dealing through reps now. Go to the SPL Labs USA website then go to the forums and they have the states and reps listed there. Haven't seen many pop up for sale used, a rep might know of someone willing to part with one though.