89boxchevy

shouldn't see any change once you seal it off

possibly just the speaker wire

they got some 8 ohm crossovers on parts express and check amazon for the seleniums i believe there alot cheaper My link 2way My link or just for the tweeter

New job bro Good stuff man.. On a side note, can I get a quote on a BC2k? pretty sure there 339.00 shipped

my sigs are glues with ca glue and there just fine i would just go to a local hobby shop and grab some ca glue just dont glue your fingers together

SIGS cant go wrong with them lol jk heres a vid on some skars

heres a link to some 2/0 never ran it personally My link

check out toolmaker on caco he can make something for you

x1000 if ur install sucks it aint gonna sound good at all seal off the trunk. when i did mine i used mdf screwed it my dash and trunk opening with a super heavy bead silicone down first. then went around it again with silicone and dynamat over the edges it has to be air tight or its more than likely gonna sounds like

as far as i no most local shops dont have the proper equipment to test high output alts i could be wrong thoe

i had 105 sq.in. o port on my 2 12 sx's n never had a prob with a 1000d to each one. i think it would jus be easier to build a new box IMHO

crescendo

the only prob with optima that i had was that my 8yr old blue top stopped working but i got my use out of it lol i got 3 yellows in the back and a red up front and no probs or complaints

i was kinda thinking BLs- BTLs or dc xls jus want it to be stupid but kinda wanna stay around 1000rms jus for shits n gigggles and make it as loud as possible

something around 1000 to 2000 watts rms what do you guys think would be the loudest we will say the power supply will be a 300amp alt and 2 to 3 xsd3100 and 2 crescendos bc3500s strapped preferably at 2ohms

my old style 12s were rated at 1000 rms

a few times while using it and then a complete drain after im done on the tank and filters

ive done it quite a few times with out a isolator and never had a prob some were a yr or so and some were a few months

maybe its my compressor i think its pissed lol i ran it for 3 days sanding and grinding at the same time me and my cuz were working on it and not 1 drop of water and then all of a sudden boom a flood lol

heres my problem ive been working on my caprice to get it ready to paint and i got it in primer and went thru 4 mini desicant and 3 paper filter that screw on the gun. spraying a quart of epoxy primer and a gallon of primer on the car. my compressor is a 80 gallon ingersoll rand single stage pump rated 18.1 cfm at 90 psi well my water prob coming thru the lines is so horrible lol i dont wanna spray the paint and waste a bunch of cash on paint i have 2 filter/water separators on 1 line already roughly 30 ft away from the compressor that im using and it helps but not very well im getting roughly 0.5 to 1 tablespoons of water coming thru the lines every few mins. does anyone have any suggestions on a way to get rid or help get rid of the water coming thru the lines.

My thing is I couldn't find rage gold anywhere which is why I said bondo. My local lowes didn't have it and I doubt bucheites would...I have no local home depot. They didn't have kitty hair either though. Also, any suggestions on electric staplers? I don't have a compressor ATM or I'd get an air. you should be able to find rage at your automotive paint store if you have one in your town. if you cant find rage locally order it online u wont regret it lol and some plastik honey My link its a body filler thinner helps alot when u jus gotta do light coats and 1 pint last forever

heres one at lowes something like this i have the older model like this one

use rage for body filler sands alot better and when u use fleece stretch it super tight it will come out better less body filler and a air t50 stapler or the electric ones they will be ur best friend saves alot of time

added a few more pics with the 3rd battery installed amps should be here hopefully at the beginning of next week

i had 2 12s sx they slammed man the new stuff i dont no about thoe best of luck