noodlebot

oh okay sick. haha yea because Ive never actually used a bass knob so i was wondering. thanks for the help everyone

yea i got a gain knob. but one last question for the Gain knob would i set the gains on the amp with the gain knob full. then i will never go over? is that how it works.

tried one of the 4 channels and i got sound from both speakers.. SO they work! but wtf i only bought that stupid deck so i wouldnt have a shithole of Y splitters and stuff in my trunk... Whats the best way to hook up the 2 amps just off the Front and Back RCA outputs??

worth a shot, but I have big 3 upgrade, stock front battery and an optima yellowtop in the trunk i couldnt see it not handling it.

yea the blue light comes on.

BEST drawing i could do. if need clarification ask, both amps hooked up to a yellow top in the trunk and yes the bats fine i was running my 4 channel off it before i tried to install subs today Dual 1 ohms is what i ordered so should be. and that is wired to 1 ohm i believe. http://i39.photobuck.../ccaleb/amp.jpg

kranny even when i turn it on it doesnt work... Shitty diagram coming though

Ill try and draw a diagram right quick here

Well Ive been reading around and I will Reset the unit. and put the Subwoofer to "on", then If there is no source go into the sound settings, and all other 4 speakers play, but still no subs. Then no matter what once I click any source and go back to settings the subwoofer portion is greyed out.

Alright, so i have a Sony XAV-72BT deck, a 4 channel amp and I just bought 2 Fi ssd's and a crescendo 2000 amp. So the deck has Front, rear RCA outputs and 1 rca jack out for the sub out. So i bought a 2F1M rca and hooked up the sub amp to the sub out, and then used a 4 channel rca for the 4 channel amp. There is 1 remote wire which i spliced into two and put to both amps. I have my Fi's wired down to 1 ohm and i want to set my gains using my multimeter. THERE IS NO SOUND. I put the multimeter on the speaker outputs for my subs and theres no voltage. theres no sound if i hook them up Both amps do light up and turn on. My 4 channel plays music but i Cant for the life of me figure out how to get my subs working. Ive tried putting an set of rca's from the output on the 4 channel to the cresendo. Im fuckin hooped. help me out eh?

ice water

he seems nice

i'd say

I would probably not have it there.

thanks srp365 that first post was exactly what i needed

still for sale?

IB4Dildo

How do you guys feel about hifonics amps?

I used y-splitters, they worked fine. You may lose a little sound quality i have no idea, but its working fine for me.

2 12" level 3s, 2.0k amp. carbon fiber dustcaps 2 12" level 2s, 1.2k amp. carbon fiber dustcaps Edmonton, alberta, canada.

would a local shop sell aeros or i will most likely have to buy online?

So you want to run the aeros external from the box to the rear deck level? Yes exactly. I want the end of the port flush with the rear deck. Will I count the entire port length for this or just the port inside the box? and is this a legitimate way of having the port.

I have a mac so I cant use torres....... I remeasures and need the width to be 35''... if anyone wanted to put that stuff into torres and post a pic here...

Hey, so i have a 05 civic sedan and i want to put 2 12'' lvl 3 dcs in the trunk. I want to do subs forward port through the rear deck, although I have never built a box with a cylindrical port yet. I was wondering if the shape of the box really matters or I can just get my volume and put a port in. I wanted to do 3cu.ft. net volume. tuned to around 35hz (open to suggestion) sub info http://www.dcsoundlab.com/level3.html Also does it matter how much of the port is outside the box? because it will be poking out a bit to make it through the rear deck. This is what I came up with, is this a good diameter etc? When I put in a 4'' diameter the length was 6 inches so that didnt seem right. This wedge will be rotated 90 degrees. The subs will be parallel with how the seats lean back any advice would be greatly appreciated. I made this thread quick so if i missed anything let me know.

done, i was finished in september completely forgot i had a thread here. theres a lack of pictures also but oh well. First thing I've done anywhere close to a build so lemme know what you think. I still have to cover up where the expanding foam can be seen but its too cold to do that anytime soon haha.