DRCinc

a shot of the amp without the cover and painted its a XD 700/5

bars to hold the box down while he is hitting the dunes

threw some bondo on the center piece to help with the grooves on the side and make everything look a little better. we rhynolined EVERYTHING we put in. this includes the amplifier, kicks, centerpiece, box, EVERYTHING! left the box to show some love to the glassed piece we ran into a small dilemma with the box, we realized that the rear seats protrude when put down. so we made some small adjustments to the box to be able to make it work correctly. so what we did was notched the box a little(we had room to make it work) so that when the rear seats are down, it fits perfectly its still getting worked on with a bunch of finishing touches, and wire clean up but a couple shots of the inner kicks.

uploading

so we do alot of work for a Bronco restoration place down by our shop so they send us quite a bit of these lovely vehicles so we thought we would share one of them with you guys. we will jump right in to the good stuff noones wants to see wires hanging dry fit in the car started to resin it. no matte glass was needed we only needed shape for this console. the skeleton was sturdy enough to handle whatever we put in it and the resin will only make it better second coat started on the box while the resin dried

ive had a customer ask me about metal boxes. i told him he could try to make a box out of MDF and cover it in thin aluminum for the look he was going for

we'll add the third down the line

being a cavalier owner personally. do the big 3. and dont skimp on wire

nvm scales broken

ill weigh it right now lol i have a scale

glad everyone likes it!

im completely novice

check out our subforum ive got my cavalier build on there. you might like it

1999 chevy cavalier 2.2L

Collin at DelReyCustoms got his mechman 270 amp alt. beauty pictures

it depends, ive seen people use a portion of the footwell and some people just do a square and do beauty panel's on the rest

smoke machine?

your making all this out to more than it has to be. its a very simple process, cut wire, solder/crimp and done

we met doug and jordan at CES, great guys and they do some really great work

the t2's are good but the X-over on the T3's is better and the tweeter is also better. if you can get them for a good price i would go T3

like like like like

or you could just try and CA it all the way around. just try and avoid coil rub as stated before

photobuckjet. then post the img link here

take pictures of everything for us if you can. get your amp's the battery where its grounded etc. everything you can get a picture of is good

turn bass boost off if its on, you might need an electrical upgrade kit so start looking in to that. it seems like the amp is going into protect mode ether because of low impedance or low voltage. have both checked out and make sure you have the right gauge wire going to the amps. maybe think about investing in some good equipment. im not trying to be an ass or anything but people on this site require all the information you can give them