Smoove

SA-8 v2 3/4" SD-2-8 1/2" Most 8's you can get away with 3/4" baffle with the rest of the box 1/2". But always remember. If you half-ass your box it will fall apart or sound like crap. And for you haters out there. I put RF HE-2 8's in 1/2" boxes where they lived for 6yrs. with zero problems. So if 1/2 will support HE's, it will support SD-2's.

DVDFab rips it off the disk and Handbrake to convert.

You will want at 6" aero port

Stitched is doing an E15 build also.

What is the biggest box you can fit in your trunk. Gross volume for my box with 2 SP4's is 11.5 sqft. Edit : why did you put an SP4 question in the Sundown section?

Easy answer here is Ermagerd

So what is the bass gonna be recorded at (-0, -5, -10) we need to be prepared to set our DD-1's accordingly

There is a sticky for it search is your friend http://www.stevemeadedesigns.com/board/topic/14953-rockford-t15k-the-proto-pics-and-short-story-more-pics/

I have been going to the same brick and mortar store since before there was an internet to buy stuff. Because of that I can pull one of the owners aside while other customers are in the store and ask for a legit price. I still like to support the local small businesses. So too keep the good relationship with a shop is a good idea. Remember Amazon can't always ship stuff to you 2hrs before a comp.

How long will the special last? doing my tax returns next week.

I use -10 on my sub amp but use an LC-1 to turn down the amp when playing stuff like decaf.

Vodka/mountain dew's right now. I'm gonna check out what you did. I may hit you up for more info

Would put him on southwest. $125 each way

Hey, tony keeps coming out with cool stuff all the time. I have no idea it it's something that would be hard to detect or display. And for all I know it would be something the deck would have to detect. I hear what you're saying, same reason why I put an o-scope in my dash to look for the same thing. Make it affordable and show me how, I'd do it. Check my build log. My o-scope was only about ~$50 or so, plus it needs a resistor divider network to reduce the voltage from the amp. Tapping into the RCA's might be easier. Tapping RCA's was what I was thinking might be possible People on this forum keep making me wanna try stuff cause they put the knowledge out there. I will look at your build log and look for this. I just looked at your build, I have no idea how I didn't go through the whole build. I will check it all out tomorrow when the sun is up. to much vodka to read right now

EEEEK!!!! that's not cheap. Is he flying southwest?? Are you talking about flying out Wicks or Tony? Cause I'm about 4miles from Tony's shop

Hey, tony keeps coming out with cool stuff all the time. I have no idea it it's something that would be hard to detect or display. And for all I know it would be something the deck would have to detect. I hear what you're saying, same reason why I put an o-scope in my dash to look for the same thing. Make it affordable and show me how, I'd do it.

Hey, tony keeps coming out with cool stuff all the time. I have no idea it it's something that would be hard to detect or display. And for all I know it would be something the deck would have to detect.

Ya, that sounds like a pain. I was hoping for a cool digital read out with -db on the screen would be badass. Like it could be detected no matter what the volume is.

You are correct. I'd like to know if I am clipping, but I'd also like to know when I play a track what it's at. Like going from Jeezy at -5 to an old school sir mix a lot at what seems like +3db. so one song would show -5 and then you hit the next song button and it shows +3.

I knew that would monitor where you wanted to be, but not if a track was -0db or -5db.

As the title states. How about a tool that can tell what -db a track is??? Lets say my favorite cd is at -2.5db, I'd like to know if I should turn down my system a little to reduce clipping if I set my system at -7.5db .

That's pimp.

Any updates?

Holy crap, you were faster than JoeX

Sundown is not expensive compared to companies like JL. RF - Sundown - DC - CT Sounds and many others are all good. Everyone has brands they prefer. Yes the power in both my builds is RF, but speakers are crescendo's, Fi, RF, and Sundown. And yes my Sundown sub performs great :-) Which is my Sundown review as initially requested