-
Posts
4983 -
Joined
-
Last visited
-
Days Won
2
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Everything posted by alaskanzx5
-
a little help/advice would be great.
alaskanzx5 replied to alaskanzx5's topic in SPL - SOUND PRESSURE LEVEL
didnt put the common walls in when i designed the box but the finale tuning came out at 43.66 hz and those holes where down freehand with a router arent as bad as they look and the subs sit nice and tight. could be better but it was my first time using a router. i do listen to it daily but was aiming for higher number. will make a prettier box later. lol the 144.5 ( highest with the box ) was sub up port up with nothing in the way of the port. when it was facing back i folded the seats down and moved it around. did a 144 at 51 hz about 4-5" between port and hatch lid. went lower when i moved it further away or closer. -
ok, so i had a prefab obcon box with my 2 rockford t2 12s running off a t1500.1bdcp wired at 1ohm do a 146 peaked at 51 hz. the box was either 1.5 or 1.75 per chamber slot ported at either 38 hz or 40 hz cant exactly remember. < port back sub back now i have a built box 1 chamber at 3.94cuft slot ported at 43.66hz with 67in of port area (16.99 per foot ) did a 144 (back seat folded down ) peaked at 51hz port back sub up and a 144.5 (back seat up, didnt test with it down) peaked at 44hzport up sub up. i know its a good score for the power and for 2 12s but im shooting for 146+ with the same stuff i have now maybe a change in box. i dont see why i shouldnt be able to do atleast closer to a 146 or why i shouldnt be able to do higher with a better built box then the pos prefab i had. meter used was an ac-190, sealed on windshield passenger side at the same shop everytime nothing with how it was metered changed. notice in the screenshot of the box specs i didnt put in the common port walls. changes the tunning and area to 43.66hz and 3.94cuft the box is now facing up just under the height of the back seat. inside port walls rounded no 45s and 1 peice of threaded rod between subs. double baffle and back < cut an extra peice so i used it. electrical; 250 amp singer alt, interstate starting batter up front, interstate deep cycle in back either 55hr rate or 65 dont remember right now (750cca), 10farad rockford cap holds around 12volts at idle during the metering. 1/0 front to back then to cap then 4gauge to amp. 1/0 on front batter ground and engine ground, waiting for time in the shop my dad works at to put the 1/0 from alt to battery. < dont say it i already know, i am waiting for money to buy an xs power for under the hood then second xs batt and taking out the cap but it helps by about .3volts which is better then nothing.
-
if you go to focusfanatiics.com there is a guy on that forum ( turbo tom ) who can reprogram your ecu and including the charging voltage of the car. the proplem with that is the higher voltage can make the alt wear down faster and possible other issues. the fix to that is have him do 2 different tunes to where one has the higher voltage and you load it into your ecu while competeting and then load the other tune after. a couple of people on the site have already talked about it and i do believe one person already did it.
-
either way could work. as long as you keep it air tight after the adjustment is made i dont see why it wouldnt work. would be nice, could change it for high spl then move it back and swap out ports agian for the low lows.
-
im thinking airleaks. how are you gonna kep the ported section from having air leaks where the none ported section is attached at. just a few bolts wont make it air tight.maybe some rubber molding that will slide with the box so that when you bolt it in place it smashed the rubber like a gasket.
-
well this might be my last year db chasing. considering selling it and just going with a single 10 or 12 when the year is up but after having so much bass i dont know if i could go for such a small amount. if i keep it i will build a new box closer to 35hz so that i can get nice and low. my plans change all the time so only time will tell.
-
My 152.4 run
alaskanzx5 replied to dsktim's topic in Member Videos - Host 'em & Post 'em! System Vids / Off Topic
well, tim works here in wasilla so if you talk to him he might give you a demo. -
yeah it was me. i moved it further away from the hatch and did a 143.4 then pushed it agiant the hatch and did a 144. left it like that till the end of the comp but now its facing up almost right at the hatch window and sounds a lot better and is a good amount louder. gonna go down to image audio later this week ( hopefully wednessday ) and have it tested agian. gotta find that sweet spot for the box.
-
well, seeing as to how this is a long build and ive got everything but the make it look clean part done as far as the bass goes (mids & highs still need amp + more maybe ) im gonna go ahead and make a build log. the equipment sub amp -- rf t1500.1bdcp subs -- 2 rf t2d412" sub enclosure -- custom, 4.3cuft tuned high at 45hz 16.xx per foot. slot port. plays into the low 30 decently but anything from about 35-50hz sound real good. door amp -- rf t400.4bd ( gotta buy ) door speakers -- rf t1 6x8 front and rear ( want a set of t2 6.5 componets for the front ) head unit -- pioneer dont remeber model number but it was one of the nicer hu's in 08 ( dang that thing is old now ) rf hybrid 10farad cap micheal singer 250 amp alt. doing big 3 soon just got wires for it. batteries intersate starting battery 550 cca if i remember right. interstate rv deep cycle 65ah will be buying an xspower d3100 for under the hood and most likely a second one for the back. wires rf 1/0 front to back power wire rf 1/0 ground rf 4gauge from battery to cap - upgrading with 1/0 rf 4 guage from cap to amp rf 8 guage from amp to subs will be using 16 gauge for doors so everything isnt perfect but this is all a learning experience for me. but without more delay some pics. the car, getting it ready for paint going with the same stock color. wont be painting it untill sometime october/november. the box dry fitting just a rough draft of how it could look measurements might have changed from this sketchup i dont remember for sure though. 2 short videos
-
My 152.4 run
alaskanzx5 replied to dsktim's topic in Member Videos - Host 'em & Post 'em! System Vids / Off Topic
wasnt just the back that needed to be held. your front driver door needs to be with that latch proplem and your roof could use some sound deadening. it was rolling and flexing like crazy. -
ford focus 2 12's
alaskanzx5 replied to alaskanzx5's topic in Member Videos - Host 'em & Post 'em! System Vids / Off Topic
another video -
if you have them ( or the money for them ) go 4
-
image audio in wasilla on june 3rd people start showing up at 7-8am. free food and a dunk tank talk of more but i dont know. can find them online and on facebook. perfectionist in anchorage june 16th i believe if i remember right, can find them online and on facebook. they do some realy nice work and there will be some great looking rides there. safe and sound june 26th, northway mall i think. can find them on facebook and online too. i have a list im putting together, if you search alaska on this forum you will find it. waiting to hear back from a few other shops on details of if they are doing a show and when. edit date corrected for image audio
-
you gonna be checking out any of the comps while your here? there is 3 in june that i know of.
-
another comp added to the list.