-
Posts
6411 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Everything posted by wL<3bass
-
Have you tested it? Also can you take pcitures with a DMM reading each of the coils, and pictures of the coils themselves? Also in the pictures what are those marks on the spider near the tinsel leads? Sorry for all the questions but after the last few speakers I've bought being blown without my knowledge I'm gonna be picky about stuff like this.
-
Oxygen - ruckspin and planas
-
AA havoc, a lot of the woofers mentioned are not recommend for sealed enclosures...
-
8 times... dude is an absolute monster...
-
Sundown X-8 Work in Progress
wL<3bass replied to sundownz's topic in Sundown Audio - GREAT Amps/Subs! GREAT Customer Service!
Great jacob now you got me wanting to play with 8s again... Lol -
I usually use 14-20sqinches for my rule... Sometimes more than 20 is applicable.
-
Sundown X-8 Work in Progress
wL<3bass replied to sundownz's topic in Sundown Audio - GREAT Amps/Subs! GREAT Customer Service!
Is it gonna have a surround like the one in the model or a tall roll so its increases the effective cone area? -
I don't understand the need for an 8 to use 1000wrms daily...
-
This post cannot be displayed because it is in a password protected forum. Enter Password
-
There is a set of 15" lvl5s in the FS section...
-
I def give up that space for ported over sealed
-
For reference, JL recommends that the 13w1v2 (with a 21hz FS) be tuned to 26hz with an F3 of 26hz, it played very well in the low frequency region and still have plenty of topend output, but a very very good bottom-end for a speaker of its RMS. Just to give you an idea about low tuning and manufacture specs. So I think you'll be alright, and you said you want it for DVD use, you gonna need that extra lowend extension... I say go for it.
-
This post cannot be displayed because it is in a password protected forum. Enter Password
-
He broke part of the motor mount first because he didn't put all his motor mounts on and was powershifting it racing me and snapped it off... his time the bolt and aluminum block couldn't handle the load, the bolt is have snapped in partially in half, and bent... The threads are non-existant in the block... I already told him to retap the block with a larger bolt and this time threadlock them in... and part all his motor mounts on this time It'll be my brother or I fixing it so we got it handled...
-
This post cannot be displayed because it is in a password protected forum. Enter Password
-
This post cannot be displayed because it is in a password protected forum. Enter Password
-
If you wanna run 3k and be able to play it full tilt for more than 30sec-1min then get an alt... Go with the biggest you can get for your car, that's what I did, then you never need to upgrade... well useless you go duals lol... Like Chris said I'd choose another brand. I like Dc Mechman is good too. I know Rob at DC has helped me out and hooked me up.