77-AUDIO

The web site says 2 ohm or 4 ohm.

Someone (not on here) is offering up some FI X series with the bp option and the pics they have and their email they sent say dual 4 ohm. well the pics actually didnt say that but it does show two sets of terminal leads. is this an upgrade or an option that was limited.

When I asked about them they said they intended to make them, but never really got a market for them. If i'm wrong please let me know.

http://itunes.apple.com/us/app/metra-electronics/id408966989?mt=8&ls=1

do it right or dont do it.

What I am thinking, but I know that woman and when she sees that envelope with my name on it and I have already told her I am sending her some money just didn't tell her I was taking her medical bills out of it. I will be getting a phone call. When I get the call I am going to tell her not to spend it all in one place, then hang up the phone.

sorry man based on usaci rules he can. http://www.soundoff.org/rules.htm#spl

They say revenge is a dish best served cold. So heres whats on the plate. I am to split all money from any payment that I received that is from anything from when I was married (even though I only worked) with my ex wife. well I am getting back $166.40 for over payment and have to give my ex $83.20 sucks right. Well she is responsible for half of all medical bills for the kids for non reimbursable expenses. And I have a couple of those that she hasn't paid her half. Her half is not much totaling a whooping $75.00. so I am going to copy the check so she can see the amount received, and send her a copy of the medical bills that I have already paid (stamped paid in full) and money order for the difference. I hope that dish don't cost more than $8.20. Am I an ass for doing this. I mean she did cheat on me in my own house at that.

they need max dims, and what you are looking to tune the box to. how much power, and ohm load might be helpful. IMHO. I have 3 - 10 lvl 3 dual 1 ohm wired to .6667 on a sundown 1500 daily and my box is 3.63 net tuned to 32 htz. and I did a 143+

get the dc 3500 amp

I have 3 - level 3 10" dual 1 ohm dc subs wired to .6667 ohm on a sundown 1500 and I bump it hard daily. so if you set your gains right and build a good box I don't see a problem. "IMO" I am looking at getting the 3500 for my 3 10" after the first of the year. and then I might get 3 more 10's and wall it with 6 10" dc subs.

I had this kid start bumping his stuff in a parking lot the other day and I was like what you got. he goes 2 -15" punch. I was like not bad what size amp he said some 5k amp. I was like cool wanna play. he goes what you got I said 3 DC 10" on a Sundown 1500 watt mono block.(typical response never heard of it). Hes like man you can't even get close. So I was like really!!!. I put on "bass I love you", and shut him down. He was like holy crap wish I wouldn't have just bought all of this stuff or I would look into getting some of those. DC AUDIO or ride with out bass.

^2x And thats all you want to put to it. I am looking to put a DC 3500 on my 3 Level 3 10" DC subs wired at .6667 ohm and do it for daily. and tuned to 45 htz.

I am looking to install a viper remote start in my brothers dodge ram mega cab 2500 6.7L turbo diesel. I need to know what modules and stuff is required to put thins in without any problems. please help. any part numbers and company information will be greatly appreciated.

let me know if yall have gotten it and what yall think.

Artist - Don Dorsey Album - Bach Busters Song - Toccata and Fugue in D minor. Just give it a chance.

BACK BACK FRONT maybe put the dc logo on the sleeves.

This is what I am trying to figure out. I plan on walling my car sometime in the real near future "June of 2011" but I am wondering what I should do. I think that 6 - 10" DC Level 3's would look sick and freak the everyday consumer out, but then again seeing some 15's would also do the same. The cheapest option is number 2 new and a re-cone where as the other 2 are about the same in price.

I did but not good enough. sorry.

http://www.woofersetc.com/index.cfm?fuseaction=category.display&category_ID=3&brand_ID=134&sort=brandName

i asked about the dust caps but it has to be that way cause of the coil.

that box looks real small how many cubes.

people can read it but not reply. lol. this is the daily bump

I am wanting to do a new box. this one will have a steal cage inside that will will be used to attach the mdf to. it will have all thread thru it and then the mdf will have holes in the material that will be used to bold the box together. you will see later once the build starts after Christmas to around tax time. Now for the box. max dims are 36" wide 17" tall and up to 25" deep. all 3 DC Subs will face forward as well as the ports. I like symmetrical. I plan on using standard PVC pipe for ports with flairs on the inside. port diameter will be 4 - 4" PVC. 12.5664sq. in per port with a total of 50.2656SQ in. of port. all I need is the box depth and the tunning length for this box. as for the metal skeleton it will be 1" sq tubing with several holes drilled in it to allow me to factor in the interior of the tubing into the airspace. I might loose less than what one of my 10" DC level 3's take up. I also would like to be able to block off 2 ports and get a lower tunning if possible for daily if it works that way. My current box flexes to much and the front is doubled and I have all thread inside it on the port. what I might do to keep the ports on the new build from coming loose I might put all thread thru them also. And I plan on making the subs bolt to the box also. I am looking to try and hit the 145+ mark and if the current box I have is flexing it will never happen. and I am also looking at getting another SAZ-1500 and strapping and running it at 1.5 ohm. should be enough power to do that (145) and still not over kill the subs. I would like for daily to be tuned to the lower 30's and for comps closer to the lower 40's. If I have to change out the ports or add to them I can. I mainly need port length..