john253a

im still learning how to use windows paint but i think i did a good job

Yep and 12 0g runs from you 36 batteries and 6 alts, better crosse that out and make in 12 to be safe

How much power you want to feed them, Any where from 1-24 amp if you want Idd love to 6 15" dvc with 2 amps strapped to each coil,

White clouds, 10 Down low magic carper ride steppenwolf(decaf) La roux in for the kill (slow version or decaf) Genuwine pony Vidio phone beyonce(decaf)

im the same i like 5.25" best for sound and 6.5" for that bit louder sound but i have always a spot for old skool kenwood 7x10, cant speek for the new skool, i did just install 4 sets of 10" pioneer 3way on 800rms in a single cab and i must say it was loud as hell, for all speakers and no subs

I cut through 1x 3/4 and leave the other un touched, and depending on the sub something I don't even go all the way through the first baffle, As for the baffle it will be only very miner difference to strength of the box Have you ever tried to bend 3/4mdf thats only 5/8-3/4 wide, bet you can't, that's why small boxes don't need it and large do, It all pressure/force over surface area

eclipse avn series, ive had a few now, i like the fact that its 5v pre out, and has built in crossovers and subsonic filters

get your subs and box sorted first, and run with current amp, and just tell people your running them in, then when you get the funds, buy the amp you want.

you did. people just can't read properly. where?

let me no if you need a drawing

10 or 12" buy saying 1.5cuft i think it a 10" but you never no edit as the 12" recommends 1.5

as above my opinion is 1x alt and 1 good bat up front and 2 in rear build you box but run only the power supported buy elect system, then as money picks up, another alt and amp, till you get to want or where you need to be

stick with ported, or if little building skills go sealed if you go ported 2x12" if sealed 2x15" another option is buy a sub and box built by the manufacture (not a shitty prefab) there a slightly better design box as there not a generic box

entre level stuff amp wireing kit http://www.sonicelectronix.com/item_33026_db-Link-PK4ANL.html 6x9 rear http://www.sonicelectronix.com/item_18208_Rockford-Fosgate-P1694.html 6.5 front http://www.sonicelectronix.com/item_43143_Rockford-Fosgate-P165.html amp http://www.sonicelectronix.com/item_19566_Rockford-Fosgate-PRIME-R300-4.html or if just front there going for a good price at the moment http://www.sonicelectronix.com/item_19564_Rockford-Fosgate-Power-T1652-S.html on and active setup with either (depends on how loud and clear you want it) http://www.sonicelectronix.com/item_19566_Rockford-Fosgate-PRIME-R300-4.html or http://www.sonicelectronix.com/item_34761_Rockford-Fosgate-R400-4D.html

some options for you

and with the 00-04 mustang im pretty sure 11" doesnt fit hard up against the rear of back seat the roof need to tapered if you go over 10.5 from memory it goes up to 14" at 9-10" out, i havent done a mustang box for a while as there not to common over here edit another thing to consider, most of these boxes will need to built in car, i think 15-17" in deepth is the biggest you can fit, if constructed out side of car

fuck man cant you even read, he's alrady posted them, and the car there going in

For some that knows alot you design one 1st a 6" side ported box 35"w in max width of 35" is a sealed box with a hole in the side So now the box need to be 29"w to allow fo port So now that, sorted, you'll need more deepth then 19" because you shortened the width by 6" 2nd port length will be somewhere in the 28" length mark so you'll need to bend port so now yourv taken up 12" in the back, putting the port somewhere with 3-5" of sub with the opening facing the rear, and you'll have unloading issues with the port facing 1 or 2 subs 3rd to stop unloading you'll need to put 2x bends to make it 180deg, and then you lose the efficiency of an aero, witch is what allows you to use a smaller ratio

What do you want to achieve? How much power can you afford to give the so called subs? And how much do you want to spend on subs? So we don't no what car or Elect system to support. All we no is you happy to give up the whole trunk

You wana put all 4 in there, If so how much power and I'll draw something u for you

You can't fit a 6" aero in that box 9.25+(3x8.5)=34.75 +0.25" clearance for 1 sub and side wall =35" and that with every sub touching each other And you'll get to much flex like that And with 10.5 high you can't fit 2x 4" ontop of each other to enable clearance between aero and subs

And in the space avaible you'll only be able to fit 1x12" Not 2 and not a 15 You'll need 3-3.5net minimum for either and your under 2 at the moment So you box will nees to be bigger a lot bigger Between 1.5-2x bigger

Without more height you can't have less depth

.

just in case green isnt your colour http://www.gumtree.com/p/for-sale/jvc-pink-car-radio-with-pink-fly-sub/104829769