jloyjrNC Posted February 15, 2011 Report Posted February 15, 2011 Hey folks... Im new to these boards, so dont be too harsh. Ive been out of the game for a while, but have the itch again and am looking for comments and suggestions in regards to the equipment/set-up Ive selected for my car. I'm ready to pull the trigger and would love some feedback. I realize that there are many JL haters out there, but I like what I like and I have always loved the sound of the 13W7. You will not pursuade me to go with a different sub. I'm not trying to blow my car apart, rather incorporate some good deep sounding bass and a bit of knock. Not an spl or sq car, just a decent sounding stereo to play around with on the weekends. 1. Stock head unit hooked up to an Audio Control LC6 2. Total sound deadening. 2 layer trunk and doors. One layer floor and roof. 3. Hertz MLK 165 component set in the front doors 4. Hertz HSK 165 component set in the rear doors 5. JL Audio HD 600/4 powering the two door sets 5. JL Audio 13W7 in a ported box (ported through the ski hole) 6. JL Audio 1000/1 powering the 13W7 7. All top notch wiring and installation 8. Upgraded battery (NEED SUGGESTIONS!!) 9. Cap (Again, NEED SUGGESTIONS!!) Like I said, I not going for a system to blow away everybody. Im simply looking for something that I can enjoy during the summer. You know, roll down the windows and ride with some decent sounds. Thanks in advance for your suggestions/comments... Quote
bumonskateboard6 Posted February 15, 2011 Report Posted February 15, 2011 (edited) I'd do stock HU to either an Audison bit.one or wait for the RF 3stixy.3, second skin damplifier pro followed by luxury liner pro, hertz are good, JL HD 600/4 I'd change to an Audison LRx4.1k, the 1000/1 is a good amp, if you want good wire use KunKonceptz, if you want great wire use Audison cables, XS Power for a battery, no capacitor. See ya in 15 grand! Edited February 15, 2011 by bumonskateboard6 Quote Current Systems: 2011 BMW 335i Hertz HDP1 DC LVL3 12" Full Carbon Fiber 2002 Acura TlKenwood DNX9980HD2 DCLVL4 12" Subs with LVL5 Parts D.7 CoilsDC 3.5kHertz HSK-165 up front HCX-165 RearHertz HDP4 AmpDC Power Engineering 260 Amp AltBig 3 and amp powered with KNU 1/0XS Power D2400 Up Front i pulled out my dick in class many of times and had it shown. get over it bitch...stupid open legged hairy beavered bitch... going over rms = smaller box, under rms = bigger box... Low voltage doesn't blow amps. That's a myth. A router that does the sub holes makes rounded edges also?
korey_hofer Posted February 15, 2011 Report Posted February 15, 2011 I'd run different amps but everything else looks good Quote previously known as wenn_du_weinst aka fucking internet coward supreme. I talk shit on other forums like a little bitch and hope i don't get caught out on the street.
jloyjrNC Posted February 15, 2011 Author Report Posted February 15, 2011 I'd do stock HU to either an Audison bit.one or wait for the RF 3stixy.3, second skin damplifier pro followed by luxury liner pro, hertz are good, JL HD 600/4 I'd change to an Audison LRx4.1k, the 1000/1 is a good amp, if you want good wire use KunKonceptz, if you want great wire use Audison cables, XS Power for a battery, no capacitor. See ya in 15 grand! Thanks for the reply. As mentioned, Im not going for anything too exotic. I'm not sure what type of cost's Im getting into with the audison equipment. Based on the 15k comment, I'd assume I'm getting into too much. Why second skin over Dynamat? I really just dont know. What would the RF 3sixty3 offer over the LC6? I want to do this thing right. Just trying to edubacate myself. Thanks man... Quote
jloyjrNC Posted February 15, 2011 Author Report Posted February 15, 2011 I'd run different amps but everything else looks good What do you suggest amp wise for this set up? Thanks for the feedback... Quote
n8ball2013 Posted February 15, 2011 Report Posted February 15, 2011 audison amps mmmmmm. and audison bit one double mmmmmmm. definitely love the hertz. Quote THERE IS NO BUILD LOG! 1998 Chevy Silverado ext cab Alpine CDA-9887 4 Team Fi 15s 2 Ampere Audio TFE 8.0 2 Ampere Audio 150.4 3 Digital Designs CS6.5 component sets Dual Mechman 370XP Elite alternators inbound! 8 XS Power d3400 6 XS power d680 Second Skin Stinger Tsunami Wiring Sky High A Real Voltmeter not a piece of shit stinger.
KnockinthaStreetzof608 Posted February 15, 2011 Report Posted February 15, 2011 whats your budget by the way? Quote CAR -2005 Ford Mustang (Legand Lime) H/U -Pioneer avh 3200dvd Amps 2 AQ 3500d.1s strapped 1ohm daily .25burps 1Sundown Audio 100.4 1 Sundown Audio 125.2 Subs 4 AQ HDC'4s 12's Mids and highs 4 Sundown Neo Pro 8s 2 AQ Super Tweeters Electronical Mechman 270 unit 1 D3400 2 D3100's WALLED!
jloyjrNC Posted February 15, 2011 Author Report Posted February 15, 2011 I'd do stock HU to either an Audison bit.one or wait for the RF 3stixy.3, second skin damplifier pro followed by luxury liner pro, hertz are good, JL HD 600/4 I'd change to an Audison LRx4.1k, the 1000/1 is a good amp, if you want good wire use KunKonceptz, if you want great wire use Audison cables, XS Power for a battery, no capacitor. See ya in 15 grand! Thanks for the reply. As mentioned, Im not going for anything too exotic. I'm not sure what type of cost's Im getting into with the audison equipment. Based on the 15k comment, I'd assume I'm getting into too much. Why second skin over Dynamat? I really just dont know. What would the RF 3sixty3 offer over the LC6? I want to do this thing right. Just trying to edubacate myself. Thanks man... I Just looked up the bit.one...I have read nothing but very positive reviews. In comparison to the RF 360.2, there is no comparison. Do you feel the articles I read are accurate? If so, I'm sold. Quote
jloyjrNC Posted February 15, 2011 Author Report Posted February 15, 2011 whats your budget by the way? It started at 6-7k. Guess thats not gonna happen...Oh well, I guess if I'm gonna do it, might as well do it right! Any suggestions? I am willing to go into the 10-11k range. Like I previously mentioned, not looking for a true SPL or SQ system. Just some good sounds to enjoy during the weekend. Your feed back will be appreciated. Quote
bumonskateboard6 Posted February 15, 2011 Report Posted February 15, 2011 Bit one is significantly better than a 360.2 however rockford is releasing a 360.3 later this year and although not much is known it is supposed to finally be on the bit one's level of processing. Quote Current Systems: 2011 BMW 335i Hertz HDP1 DC LVL3 12" Full Carbon Fiber 2002 Acura TlKenwood DNX9980HD2 DCLVL4 12" Subs with LVL5 Parts D.7 CoilsDC 3.5kHertz HSK-165 up front HCX-165 RearHertz HDP4 AmpDC Power Engineering 260 Amp AltBig 3 and amp powered with KNU 1/0XS Power D2400 Up Front i pulled out my dick in class many of times and had it shown. get over it bitch...stupid open legged hairy beavered bitch... going over rms = smaller box, under rms = bigger box... Low voltage doesn't blow amps. That's a myth. A router that does the sub holes makes rounded edges also?
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.