sundownz Posted April 4, 2012 Author Report Posted April 4, 2012 Email us for quotes and tech questions. 1 - Jacob Fuller - Owner, Sundown Audio - Sundown Audio on FACEBOOK - Please DO NOT PM ME -- use my email address -- [email protected]
gally Posted April 4, 2012 Report Posted April 4, 2012 i just wanna ask a Q.....can a re audio SE(the older one - 12 spoke basket) be re-coned by one of the sundown recone kits?? 2010 Chevrolet Cruze Radio --- pioneer mvh-200vbt Front/back --- alpine type s 6.5" Sub Control --- Pac LC1 Sub Amp --- GZPA 1.4K Sub --- GZNW 15XSPL D1 Battery - GZBP 12.2500X
BEEMDUB Posted April 10, 2012 Report Posted April 10, 2012 is it possible to recone an sa-12 to a zv2 or zv3?
audiofanaticz Posted April 10, 2012 Report Posted April 10, 2012 is it possible to recone an sa-12 to a zv2 or zv3? No, when you recone a woofer all you can change is the size of the woofer. IE you can recone a SA 12 into a SA 15 or vice versa. The sa-8 v1 can be upgraded to a sa-8v1.5 but not the sa-8v2 since its a completely different motor. When you are doing a recone you are changing the "soft parts" such as the surround, cone, spiders, and coil. At this time you can change to a larger or smaller basket and bolt it to the motor if needed but make sure you order the recone for the new basket size. The motor always stays the same, theres no way to change a 2.5inch coil motor on the sa into a 3inch coil motor of the zv2 or zv3 unless your buying a new motor, which at that point you might as well buy a new sub since companies dont sell just the motors.
BEEMDUB Posted April 10, 2012 Report Posted April 10, 2012 is it possible to recone an sa-12 to a zv2 or zv3? No, when you recone a woofer all you can change is the size of the woofer. IE you can recone a SA 12 into a SA 15 or vice versa. The sa-8 v1 can be upgraded to a sa-8v1.5 but not the sa-8v2 since its a completely different motor. When you are doing a recone you are changing the "soft parts" such as the surround, cone, spiders, and coil. At this time you can change to a larger or smaller basket and bolt it to the motor if needed but make sure you order the recone for the new basket size. The motor always stays the same, theres no way to change a 2.5inch coil motor on the sa into a 3inch coil motor of the zv2 or zv3 unless your buying a new motor, which at that point you might as well buy a new sub since companies dont sell just the motors. ok thank for clarifying! 1
sundownz Posted May 1, 2012 Author Report Posted May 1, 2012 I updated the first post today with new information. - Jacob Fuller - Owner, Sundown Audio - Sundown Audio on FACEBOOK - Please DO NOT PM ME -- use my email address -- [email protected]
Dj_Scarface Posted May 9, 2012 Report Posted May 9, 2012 Nothing to see here... Just a post to follow this topic Working on my 93' Ford Bronco rebuild:I have:pioneer AVH-P6500Infinity Reference 6032SI frontsInfinity Reference 6832CF Rears Crescendo CZ 6.5 kicks Crescendo 1100.4 (2) DC Audio LvL 4 M2's (1) Juicebox BlackcherryPiece together amps & wiringBout to get:Crescendo Amps Crescendo Mids Crescendo Tweets Sky High Car Audio Wire Rockford Fosgate 360.2 or .3 My Buildhttp://www.stevemeadedesigns.com/board/topic/97426-93-ford-bronco-rebuild-full-system-body-paint/
MegaMan93 Posted June 14, 2012 Report Posted June 14, 2012 (edited) That's not bad at all for the sa 15 re-cones. What is a frame? Lol Edited June 14, 2012 by MegaMan93 We don't have alot of neighbors so we can blast the stereo.
SCIVIC94 Posted July 27, 2012 Report Posted July 27, 2012 WHAT IS THE LABOR CHARGE TO RECONE A SA8 V1? SHIPPING CHARGE TO SHIP TO NJ?
sundownz Posted August 2, 2012 Author Report Posted August 2, 2012 WHAT IS THE LABOR CHARGE TO RECONE A SA8 V1? SHIPPING CHARGE TO SHIP TO NJ? If we put a re-cone in for you it is $10 -- there would be further charges for cleaning a basket as well if the basket is not clean. - Jacob Fuller - Owner, Sundown Audio - Sundown Audio on FACEBOOK - Please DO NOT PM ME -- use my email address -- [email protected]
Recommended Posts