Raptorman Posted April 29, 2013 Report Share Posted April 29, 2013 Sheeeiiittttt! No problems? Smoothe sailing? 1996 GMC Sonoma Four Fi BTL Neo 18's In 2:1 6th Order Bandpass 2 Ampere 5k's @ .5 TEAM FI TEAM #LITHIUMCANTDEMO On 10/20/2013 at 0:37 AM, KillaCam said: Fucking with a Prius driver is like making fun of a disabled kid. Pussies. Link to comment Share on other sites More sharing options...
SnowDrifter Posted April 29, 2013 Report Share Posted April 29, 2013 Anyone still doing this? trying to figure out the sensing wire for my 99 jeep cherokee 4.0 My friend had a 1996 Cherokee with the 4.0 and it was externally regulated from the factory. Had a field terminal and everything. If that's the case with yours you could just get one of the blue transpo regulators and wire it up http://www.motorcityreman.com/13advore.html ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444 Link to comment Share on other sites More sharing options...
Lyferxb9s Posted April 29, 2013 Report Share Posted April 29, 2013 I just ordered different transpo adjustable regulator. Link to comment Share on other sites More sharing options...
SnowDrifter Posted April 29, 2013 Report Share Posted April 29, 2013 Linky? ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444 Link to comment Share on other sites More sharing options...
Lyferxb9s Posted April 29, 2013 Report Share Posted April 29, 2013 http://www.ebay.com/itm/151028828885?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2648 Link to comment Share on other sites More sharing options...
SnowDrifter Posted April 29, 2013 Report Share Posted April 29, 2013 Only reason I ask: Are you sure this will work for you? ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444 Link to comment Share on other sites More sharing options...
Lyferxb9s Posted April 29, 2013 Report Share Posted April 29, 2013 Yes those do work for my setup but I am still going to attempt the diodes tonight. Only have two wires on the plug for my jeep so It shouldn't take long and if neither work I'll solder them back together. Link to comment Share on other sites More sharing options...
Lyferxb9s Posted April 29, 2013 Report Share Posted April 29, 2013 So the diodes do not work for my Jeep. Good thing I ordered the external regulator. Link to comment Share on other sites More sharing options...
andru Posted September 8, 2015 Report Share Posted September 8, 2015 I know this thread is old but i found something that might be useful i have gotten the diodes to work on mopar alts, i have a 05 pacifica and the alt only has the 2 field wires In my case i tapped into the wire from the fuse box to the pcm (in my case fuse39 org/red wire) that is unswitched with ignition the pcm reads and adjusts your voltage based on this wire it's a 20a fuse so i used a 30a Schottky diode my voltage went from 13.6 to 13.9 hot (still 13.6 at pcm) I'm going to order some more diodes from mouser to do a bit more testing Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.