TheyDontWantMusic Posted April 22, 2011 Report Posted April 22, 2011 if anybody is still in this thread and wants information on what this thread was supposed to be about feel free to pm me
kirill007 Posted April 22, 2011 Report Posted April 22, 2011 jesus christ I'm done with your stupid ass. broken record and actually yes cabin geometry can stop subs from unloading under tuning. If you knew as much as you try to portray you would know that. Truth if anybody is still in this thread and wants information on what this thread was supposed to be about feel free to pm me Do this. if anybody is still in this thread and wants information on what this thread was supposed to be about feel free to pm me Don't do this. Thinking is the root of all problems... You ALWAYS get what you pay for.
korey_hofer Posted April 22, 2011 Report Posted April 22, 2011 actually I decided to type up a tutorial instead http://www.stevemeadedesigns.com/board/topic/107247-how-to-find-your-cabin-peaktransfer-function/ previously known as wenn_du_weinst aka fucking internet coward supreme. I talk shit on other forums like a little bitch and hope i don't get caught out on the street.
dohckiller808 Posted April 22, 2011 Report Posted April 22, 2011 i dont want to get off topic but its pretty easy to get your cars RF. even if you dont have a fully flat response sealed enclosure. 1- sweep the sealed box with an rt in the car 2- take the sub out of the car and sweep it at the same volume in an open area using an rt 3- compare the two charts. the freq with the largest gap is your RF 4- sorry but thats not a tline.
TheyDontWantMusic Posted April 22, 2011 Report Posted April 22, 2011 4- sorry but thats not a tline. so tell me what the "port" is tuned to then?
Mr. Darkjustice Posted April 22, 2011 Report Posted April 22, 2011 if you want to prove them wrong so badly proving how it IS a tline takes less effort. just sayin Fusion With A Stetsom 4k2d on 2 DC XL 15s tuned to 31hz and Subs and ports forward The Revolution Was Not Televised But There Is This Thread(clicky) Dr Merkenstein is my 360 gamertag and my profession. When shit gets real, call in the Doc
dohckiller808 Posted April 22, 2011 Report Posted April 22, 2011 53??? if your playing lower its prolly because your port area to cone area is 16si of port per sub. it should sound good at the power your giving it now. give it clamped rms and im sure itll bottom out. dont be mad. its a beautiful box.
TheyDontWantMusic Posted April 22, 2011 Report Posted April 22, 2011 if you want to prove them wrong so badly proving how it IS a tline takes less effort. just sayin I already did! there's a pic! its a transmission line.
TheyDontWantMusic Posted April 22, 2011 Report Posted April 22, 2011 53??? if your playing lower its prolly because your port area to cone area is 16si of port per sub. it should sound good at the power your giving it now. give it clamped rms and im sure itll bottom out. dont be mad. its a beautiful box. which bit is the box? which is the port?
dohckiller808 Posted April 22, 2011 Report Posted April 22, 2011 in your case the "box" is the walls your subs are loading off of. you can argue all day long that a tline can have bends but at the end of the day. your cone area does not equal port area therefore not a tline.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.